Cream of the Crop 20

home *** CD-ROM | disk | FTP | other *** search

/ Cream of the Crop 20 / Cream of the Crop 20 (Terry Blount) (1996).iso / bbs / con_004c.zip / CONCORD.DOC next >

Wrap

Text File | 1995-09-09 | 554KB | 11,547 lines

Chapter 1 - General information ================================================================= 1.1 General information ----------------------------------------------------------------- Welcome to Concord. You are now reading the manual for one of the most flexible bulletin board systems around. Development of this product started in December 1993, when Aki Antman decided, due to his service in the Finnish army, not to develop SuperBBS any further, or at least not in the near future. Pasi Talliniemi did not want to wait for a new release of SuperBBS and decided to start writing his own BBS software. After only 4 month of programming, the first BETA release was available and send out to the BETA test sites. It was not a finished product, but it was running. It normally takes a lot longer than 4 month to get a complete BBS program up and running from scratch, but Pasi did it and his software included options and a flexibility not found in any other BBS package, shareware or commercial. The testing period for the BETA sites took a long time, but the product needed to be running well, before it could be released. And then Pasi had to go in the Finnish army, which reduced programming time from 10 hours a day to 2 hours a day. | But in december 1994, just before Christmas, the first Gamma | version was released as a public test version. And the first | external utilities came available which could work directly with | Concord. You are now reading the documentation for the second | GAMMA release. Development for Concord is still going on. Don't think that this what you have here is the final product. Many options still have to be added, others have to be expanded and some changed. This is only the second gamma release of Concord. Many others will follow. This documentation is written after release of the last BETA or GAMMA version and before the official shareware release. This could mean that you can find differences between the documentation and the BBS program and/or it's specific utilities. This documentation will only be updated for every official shareware release. BETA and GAMMA releases will have a separate 'What's new' file included. Please note that English is not my native language. The | documentation is written in WordPerfect and the UK English spelling checker has been used, but that doesn't mean there are | no strange things in this manual. Language used in this manual | is 'English' english, not 'American' english. Take your time to read through this documentation. Concord is very powerful and has many options. This documentation will try to explain the options and how to use them. This documentation is NOT a complete guide on how to run Concord in every possible way. That's something you have to find out for yourself. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 1 - Page 1 An international FidoNet echomail link called CONCORD has been set up and is available to most countries. If you have problems, questions, remarks or anything else about Concord and/or the specific utilities, please search for this area on a BBS near you. All Concord support sites will have this echo available to | you. Most countries will have national echomail areas available | for Concord support, so look for them at your support site. In | Holland this area is called CONCORD.028 for example. | | A separate file area network is established to spread utilities | for Concord around. Keep in touch with the support sites for the | files that support Concord. | | Concord is compiled with Borland Pascal 7.01 and contains over | 85.000 lines of source code. 1.2 Copyrights ----------------------------------------------------------------- Concord and the specific utilities are protected under the copyright laws of Finland and other countries. Concord program and specific utilities are copyrighted by: Pasi Talliniemi (C) 1993-1995 The documentation is protected by copyright laws of the Netherlands and other countries. Concord documentation is copyrighted by: Frank Hemmelder (C) 1994-1995 Jamm message base format is copyrighted by: JAM(mbp) - Copyright 1993 Joaquim Homrighausen Andrew Milner Mats Birch Mats Wallin ALL RIGHTS RESERVED 1.3 Disclaimer ----------------------------------------------------------------- Every effort has been made to supply complete and accurate information. However the writer assumes no responsibility for its use, nor for any infringement of the intellectual property rights of third parties which could result from such use. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 1 - Page 2 The author of Concord and/or it's specific utilities is NEVER responsible for any damage which may result from using this software. The only guarantee you have is that the programs will take up space on your harddisk. It has been thoroughly tested on | many different systems with many different settings, but that doesn't mean it should work for you. If it destroys your harddisk or kills your cat, that is your problem. Use the software at your own risk. Every possible action has been taken to make the software as stabile as possible. Concord may not be used in any UNLAWFUL manner or illegal activity. If this happen, local authorities will be informed. Please report any illegal versions or software cracks of the programs to the support sites. You are not allowed to modify, patch, disassemble (or anything else like that) Concord and/or it's specific utilities in any way without written permission from the copyright holder. You are not allowed to ship Concord and/or the specific utilities or part of these programs, in other software and/or hardware packages without the written permission from the copyright holder. You are not allowed to patch Concord in an unregistered version to make it appear registered. Only the official registration key is allowed to change a Concord version from unregistered to registered. You are not allowed to translate, print (other than for personal use), change or sell this documentation without the written permission from the copyright holder. Sysops of Bulletin Boards are allowed to post the Concord software package for download to their users in an unmodified version and as long as no charge is asked for downloading the software. Sysops are not allowed to add BBS commercials to the software archive. The use of a ARJ header is however allowed. Sysops should make it possible for all their users to freely download the Concord software package if requested by the user. Sysops are NOT allowed to change the archive method of the software package, because this will make the installation program useless. The installation program needs the archive in the ARJ format. The author does not guarantee any new versions of this software. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 1 - Page 3 1.4 Addresses ----------------------------------------------------------------- How to get in touch with the author: Pasi Talliniemi BBS : El Paso | Phone number : +358-0-2903463 V.FC | +358-0-8788184 V32Bis Node number : 2:220/297 Mail address : Pasi Talliniemi Tiilitie 3 SF-05200 Rajamäki Finland Internet : pasi.talliniemi@helsinki.fi How to get in touch with the documentation writer: Frank Hemmelder | BBS : NNN (Concord)BBS Phone number : +31-188059592 V32bis Node number : 2:2802/169 Mail address : Frank Hemmelder P.O. Box 270 3200 AG Spijkenisse The Netherlands CompuServe : 100341.2333 | The phonenumber will change in october 1995, because the whole | Dutch phone system is changed than. Please consult your local | phone company for more information. 1.5 Support ----------------------------------------------------------------- If you need support in setting up and running Concord, contact the support sites. A separate list is included in this archive with all current support and registration nodes. If there is no support site in your country, contact one in a nearby country. Support is given to all users of Concord, registered or unregistered. If there is no support and/or registration in your country and you would like to become one, contact the following people: ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 1 - Page 4 For all zones except zone 2 (= Europe): Len Morgan BBS : QST BBS | Phone number : +1-916-920-1288 HST/DS V.Everything | +1-916-922-1288 HST/DS 14.4 Node number : 1:203/730 1:203/731 Mail address : Len Morgan Zone 1 & 4 Reg/Supt Site Coordinator P.O. Box 13965 Sacramento, California 95853-3965 U.S.A. Extra info : Credit Cards (VISA/MC) accepted | Internet : Len.Morgan@730.gigo.com For zone 2: Ralf Ulbrich BBS : Mustang BBS, Nuernberg Phone number : +49-911-500840 28.8k V.FC +49-911-505893 19.2k ZyXel +49-911-505667 14.4k HST Dual Node number : 2:2490/2003 2:2490/2002 2:2490/2001 Mail address : Ralf Ulbrich Postfach 100 331 90565 Schwaig, Germany If you have complaints about other registration and/or support nodes, please contact the people above, depending on which zone you are in. 1.6 Registration ----------------------------------------------------------------- Concord will be available as Shareware. This means you will have | to register after the 90 days trail period. Contact the registration sites when you're ready to register or contact Len Morgan or Ralf Ulbrich. (See addresses above.) | All registrations will be valid until release v1.99, which is a | long way off and even then it is not sure that there will be an | upgrade fee. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 1 - Page 5 | 1.6.1 Prices | ----------------------------------------------------------------- | | Here is a list with prices in US Dollars. Note that the prices | may differ when registering outside the USA, because of | conversion costs. Most registration sites only allow | registrations in their national currency. | | Quantity Type of order Price (US$) | ----------- -------------------------------- ----------- | 1 Non Commercial $ 70.00 | 2 - 10 Non Commercial 63.00 | 10+ Non Commercial 56.00 | 1 Commercial 100.00 | 2 - 10 Commercial 90.00 | 10+ Commercial 80.00 | 1 Prior registered SuperBBS Sysop 50.00 | | Non commercial : Any amateur BBS system, not operating | for the primary purpose of renumeration | or profit, who's sole purpose is to | offer a free service to it's users. | This includes any BBS system that | accepts contribution, however, does not | refuse usage without such | contributions. | Commercial : Any BBS system who's sole purpose is to | operate for profit or renumeration and | requiring membership fee's before | admission. Any BBS system operated by | and for Government or any Government | Sponsored Agencies, not open to the | General Public. | SuperBBS Sysop : Registered SuperBBS Sysops must provide | proof of registration by supplying BBS | name, Sysop name and Registration key | code. | | 1.6.2 Registered SuperBBS Sysops | ----------------------------------------------------------------- | | Registered SuperBBS Sysops will receive a discount when | registering Concord. You will have to supply your registration | information to the registration site. This information will be | checked with the database of registered SuperBBS Sysops. If you | are in there, you will receive the discount. This database is | maintained by Len Morgan. | | Registration cost : US$ 50 (Reg. SuperBBS Sysops) | ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 1 - Page 6 | This discount has the following reason: | | Concord was conceived as a result of SuperBBS. Many of the fine | features attracted all of us to SuperBBS and Pasi wished to | continue with the flexibility of SuperBBS, with many other ideas | that would take BBSing further into the future. Our customer base | was aimed at the orphaned SuperBBS customers, who were very | faithful and dedicated to the software. | | 1.6.3 Registration information ----------------------------------------------------------------- When registering, you will need to supply the following information: | - Sysop name for key | - BBS name for key - Your real name - Your full address including country - Your full (international) voice and data phone numbers - Your FidoNet address - On-line hours - Version of Concord software Please note that the Sysop name and BBS name are case sensitive. That means that capitals and lower case characters are different. For example: 'Concord' is different from 'CONCORD'. Keys will be generated after you're money has been received. This can take some time in some countries, so please be patient. | 1.6.4 Registration changes ----------------------------------------------------------------- Registration changes for Sysop names are not available, however, keys may be reissued for legal name changes resulting from adoption, divorce, or any other court authorized name change. All registration sites are permitted to charge users a US$ 5 charge for the handling of reissue keys. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 1 - Page 7 Chapter 2 - Installation ================================================================= 2.1 General information ----------------------------------------------------------------- | This chapter will describe the installation of Concord. All available options will be explained and examples will be given. Note that due to the fact that this piece of software is very flexible, it is not possible to explain every possible variation in setting up your bulletin board. This manual explains the basics, the rest is for your own imagination to find out. Concord comes with an installation program. This should help you set up a new system or help you convert from a SuperBBS system configuration. | If you received a file with the extension other than ARJ, you | have not an original archive. The original archive is in ARJ | format, otherwise the installation program will not work. Please | report any archive conversions to the support sites. | 2.2 Hardware and software requirements ----------------------------------------------------------------- Concord requires the following minimum system options: | - 80286 or higher processor. (Min. 386DX suggested) - Harddisk with at least 2 MB free - 500 KB free conventional memory - Hayes compatible modem When running Concord in a multiline system with Desqview, Windows | or any other multi-tasker, a 80486SX with 4 MB memory is recommended. Concord requires the following software: - MS-Dos or any MS-Dos like box in Windows or OS/2. - SHARE.EXE (supplied with MS-Dos) | - Files=60 statement in CONFIG.SYS file - Fullscreen editor, like Gedit, Quicked or Toped - ANSI drawing package, like A3E or Thedraw - Transfer protocol, like CEXYZ, DSZ or HS/Link | - Fossil driver, like BNU or X00 | - Compression software, like ARJ and PK(UN)ZIP | | Optionally you might need a mailer if you want to connect your | BBS up to a network, like FidoNet. Concord has been tested with and requires MS-Dos versions 3.3 and higher. Version 6.x of MS-Dos is recommended. Concord has also | been tested running under Windows (including Beta-2 M7 of Windows | 95) and OS/2 (including OS/2 Warp). ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 1 Please note that most full-screen editors, transfer protocols and ANSI drawing packages are shareware programs and when you use these for periods longer then 30 days, you should also register these programs. | 2.3 Before you begin | ----------------------------------------------------------------- | | Please do the following steps before you start installing | Concord, otherwise some parts of the installation might not go | as planned. | | Load SHARE in your AUTOEXEC.BAT or CONFIG.SYS file with either: | | - CONFIG.SYS: DEVICE=C:\DOS\SHARE.EXE | - AUTOEXEC.BAT: C:\DOS\SHARE | | OS/2 users can skip this, because SHARE is always loaded. | | Check you CONFIG.SYS file for the FILES= statement. There should | be at least a FILES=40 statement in your CONFIG.SYS file, but | preferably higher. | | Add the Concord environment variable to your AUTOEXEC.BAT file. | This line should read something like: | | - AUTOEXEC.BAT: SET CONCORD=C:\CONCORD\ | | Note that there are no spaces allowed around the = character. | | When all these steps are performed, reboot your system. 2.4 Unpacking the software ----------------------------------------------------------------- Make a temporary directory where you can unpack the main Concord archive. When you unpack the archive you received, you should have the following files: - CONCORD.ARJ - INSTALL.EXE | - CONCORD.DOC | | The archive will also contain some textfiles, but the above files | are the ones you need to do the installation. The ARJ files contains all the files needed to set up and run Concord, except for the programs mentioned in 2.3, like the | fullscreen editor, the transfer protocol and ANSI drawing package. Make sure you have the ARJ utility in the current directory or in your PATH. Now you are ready to start the installation. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 2 2.5 Configuring Concord ----------------------------------------------------------------- There are 2 ways of setting up Concord. One is starting from scratch, the other one is converting from an existing SuperBBS configuration. First we will discuss the installation from scratch. Later we will discuss the conversion from SuperBBS to Concord. 2.6 New configuration ----------------------------------------------------------------- Start the installation program INSTALL.EXE from your temporary directory. You will be greeted by a screen informing you about the hardware and software requirements for Concord, a warranty and disclaimer and a list of available keys during the installation. These keys are: | F1 Read the manual (Only if the documentation file | is installed.) Alt-J Shell to Operating System ENTER Continue installation ESC Abort installation SPACE Change settings If you don't want to continue with the installation, press ESC, otherwise press ENTER. Now the screen with the installation settings appear. Here you can change the location where Concord is installed and if it is a new configuration or a conversion from a SuperBBS system. If you want to change some of the settings, press the SPACE bar. You can then change to the desired option by using the cursor keys. Press ESC when finished. If you entered a directory which does not exist, Concord will ask you if you want to create it. Concord will check the available diskspace on the destination drive and if the ARJ utility is found. Press ENTER when there are no errors found to continue the installation. Concord will now install the software in the directories needed. This can take some time depending on your system speed. When all files have been installed you will be shown a warning screen, informing you that you have to make the necessary changes to the settings. Remember, you can press F1 anytime to view the manual. After pressing ENTER, the installation program will call the configuration program CSETUP.EXE. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 3 2.7 Configuration program ----------------------------------------------------------------- In this part of the configuration program you will find the following options and sub options: General System information Modem settings Paths Message system File system User config Net addresses Limits Events Transfer protocols File archivers FS message editors Char sets Keyboard macros Other settings Msg areas File areas Doors Lng files Quit You can move between the different main options with the cursor keys. Press ENTER to display the sub-options or configuration screens. Press ESC to return from the sub-options. 2.7.1 General ----------------------------------------------------------------- This is the main configuration group. Underneath this main group name you will find almost every setting for the Concord BBS. 2.7.1.1 System information ----------------------------------------------------------------- Here you can enter the general information of your BBS system. Option : BBS name Description : Name of your BBS. This will have to be the same as in your registration, otherwise Concord will not work. Note that this line is case sensitive. Example : NNN (Concord)BBS ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 4 Option : Sysop name Description : Name of the Sysop. This will have to be the same as in your registration, otherwise Concord will not work. Note that this line is case sensitive. Example : Frank Hemmelder Option : Asst sysop Description : Name of the Co-Sysop. This name will be used in the chat function of the BBS. See chat menu option for more information. Example : Peter Jongma Option : Location Description : Location of your BBS system. Here you can enter where your BBS is located. Example : Spijkenisse, The Netherlands Option : Phone number Description : Your DATA phone number. Example : +31.188059592 Option : BBSID (I) Description : Filename for QWK/BlueWave packets. Your off-line mail packets for your users will be called as defined in this option. It is important to change this to something that is specific for your system, so your mail packets can not get confused with any other BBS in your area. You can use any character allowed by MS-Dos for filenames. Example : NNNBBS Option : BBSID (II) Description : Filename for Omen packets. Your off-line Omen mail packets for your users will be called as defined in this option. It is important to change this to something that is specific for your system, so your mail packets can not get confused with any other BBS in your area. You can use any character allowed by MS-Dos for filenames. Example : NB 2.7.1.2 Modem settings ----------------------------------------------------------------- This screen allows you to enter the information for your modem. If you are running a front-end mailer, this page is less interesting, because your mailer will handle all modem commands. The modem settings are grouped in two parts, the commands you need most of the time and the special commands. Pressing F10 will bring up the special modem commands menu. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 5 Please consult your modem manual when you are not sure about some of the options mentioned below. If you still can't figure out what the meaning of the command is, contact a Concord Support site or use the CONCORD echomail area. Type : COM port Description : Port to use for your modem. This can be COM1, COM2, COM3 or COM4. Choices : 1,2,3 or 4 Type : Init rate Description : The maximum speed of your modem. If you have a 2400 Bps modem, this will be 2400. You might have to lock the speed between your modem and your PC when using a modem at | higher speeds, this is normally only done | with modemspeeds above 4800 Bps, and you might have to install a NS16550AFN chip, instead of the 16450 on your communication card. Please consult a computertechnician if you are unfamiliar with replacing chips in your computer. When done wrong, you could damage your computer. Choices : Modem speed Option : Init string Description : String sent to the modem to initialize the modem. This string can vary from modem to modem. There is no general rule here. Consult the CONCORD mail area if you are having trouble finding the right init string. Example : ATS0=1&C1&D2| Option : Locked BPS rate Description : When using a high-speed modem, it is mostly necessary to lock the communication speed between your computer and your modem. This is independent from the connect speed of your modem. Normally you need to set the locked BPS rate to the fastest speed available on your modem. Note that you might have to replace your 16450 chip on your communication card with a chip that uses FIFO's, like the NS16550AFN chip, when locking the speed at 38400 Bps. Some computers cannot handle this speed over there COM port. Consult your modem manual for more information. Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 6 Now for the special modem commands. Press F10 to access this menu and change the items that are not correct for your modem. Option : Init tries Description : Number of times Concord will try to initiate your modem. If your modem does not initialize, Concord will return to DOS with an error message. Example : 3 Option : On hook Description : String sent to the modem to place it 'on-hook'. This means if you call in, the modem will answer the phone. The pipe (|) symbol means a carriage return. Example : ATH0| Option : Off hook Description : String sent to the modem to place it 'off-hook'. This means if you call in, the modem will not answer the phone and you will hear a busy signal. Please note that it is illegal in some countries to switch a modem off hook. Example : ATH1| Option : Reset Description : String sent to the modem to reset it to its default settings. This is ATZ for most modems. Example : ATZ| Option : No carrier Description : Response from the modem when there is no carrier when you try to call out. Your modem must be configured in such a way that it gives 'word like' responses, otherwise you will have to change many options in these configuration screens. Example : NO CARRIER| Option : Answer Description : String sent to the modem to answer the phone. In most cases this is ATA. Example : ATA| Option : ... from Description : Starting time for Concord to answer the phone. You can use this in conjunction with the following option to restrict access to the BBS on certain hours. Time is entered in the 24 hour format. Example : 00:00 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 7 Option : ... to Description : Ending time for Concord to answer the phone. You can use this in conjunction with the previous option to restrict access to the BBS on certain hours. Time is entered in the 24 hour format. Example : 24:00 Option : Flush w/ slow Description : Flush the buffer after each write with slow modems, that is modem speeds equal or slower then 2400 Bps. Choices : Yes/No Option : Wait response slow Description : Time to wait in 1/10th of a second after sending IEMSI/ANSI request. This may prevent wrong IEMSI logons. This setting is for 2400 Bps and slower. Example : 15 Option : Wait response fast Description : Time to wait in 1/10th of a second after sending IEMSI/ANSI request. This may prevent wrong IEMSI logons. This setting is for speeds above 2400 Bps. Example : 5 Option : Manual answer Description : Let Concord answer the phone when a RING is detected or let the modem answer the phone. The first method uses the ATA command, the second is set by the S0=0 line in your modem configuration. Choices : Yes/No Option : Lower DTR when busy | Description : When Concord is working, for example doing | maintenance, it is possible to switch the modem off-hook. This can be done by lowering DTR, preventing the modem from answering the | phone. In some countries it is illegal to | place the modem in this operating status. Choices : Yes/No Option : Lower DTR to hangup Description : When Concord is hanging up the phone, after a user is logged off, it can lower DTR to disconnect or sent the escape string. With some modems, lowering DTR is not working to disconnect. Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 8 Option : OK Description : String received from the modem when the modem is initialized. In most cases this is OK. Example : OK| Option : Ring Description : String received from the modem when somebody is calling in. The RING will tell Concord to pick up the phone if answering is enabled. Example : RING| Option : Escape code Description : String sent to the modem to let the modem return to command mode. When this string is sent, the modem will disconnect and return to command mode. You might have to add a delay to this command for some modems. The symbol '~' is used as the delay character with most modems. Example : ~~~+++~~~ Option : Init delay Description : Time delay between the initialization tries. Concord will wait the defined time before trying to initialize the modem again. Example : 10 Option : No hangup Description : Force a Carrier Detect (CD) even when there is an error or out of time problem with the modem. You would normally leave this to No. Choices : Yes/No Option : Escape delay Description : The delay in 1/10th of a second before and after an escape sequence. This is useful for slow modems. Example : 5 | Option : x Base addr | Description : Special COM port base address for direct | async routines. Use this only if you use | strange COM port settings. | Example : $3F8 | | Option : x IRQ | Description : Special COM port IRQ number for direct async | routines. Use this only if you use strange | COM port settings. | Example : 2 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 9 2.7.1.2 Modem responses ----------------------------------------------------------------- When you press the F10 key in the modem settings screen, another window will appear. In this window you can specify the different connect strings for your modem. Any connect string is possible, even for your fax option. You can add a new connect string with ALT-A combination. Adding is done at the current cursor location. Deleting a response is done with ALT-D. The response your standing on will be deleted. Editing is done with the ENTER key. Move to the string you want to change and press the ENTER key. You can move down and up with the cursor keys. Use the TAB key to go to the next field on the same line. The Total field tells you how many strings have been defined. Option : Bps rate Description : Speed of the modem connection. This field is used by Concord to determine the speed of the connection. When using modems with error-corrections, this could be different from the value defined in the Response string value. Consult your modem manual for the correct strings. Example : 38400 Option : Response string Description : String received from the modem when a connection has been established. These strings can also contain extra words when Concord is used with an error-correction modem. When using a high speed modem it is mostly necessary to place a '|' or '/' behind the 1200 connect string, to differentiate this string from the connection at 12000 Bps. Example : 28800 Option : Errorlevel Description : Errorlevel to exit with when a connection is made. When using external programs to receive faxes, you can specify an errorlevel and Concord will exit to your batchfile with this errorlevel, allowing you to start the fax program. For normal Concord operations this option can be left as it is. The 0 means Concord will handle the call. Example : 123 You can return to the previous screen by pressing ESC. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 10 2.7.1.3 Path ----------------------------------------------------------------- This is were you specify the directories Concord is using. Concord will ask you if it can create these directories if they do not exist at startup. Concord does not care if there is a | trailing backslash behind the directory or not, although you | should make it a habit to always add a backslash when entering | directory names. Option : Common path Description : Directory used by Concord for all nodes. In this directory you will find files that Concord will generate when running and which should be available to all nodes. We suggest you put this on a RAM drive if you have the memory for it. This will speed up Concord. See your DOS manual on creating a RAM drive. For multinode systems is this the directory where all files are stored that are used by all nodes. Example : C:\CONCORD\COMMON\ Option : Swap path Description : Directory where Concord will put it's swap files. This will happen when you shell to DOS or when executing an external program in case there is no EMS memory available. This directory can be the same as the working directory. (See below) Example : C:\CONCORD\WORK\ Option : Temp path Description : Directory used when the user is unpacking files in the temporary directory available from the menu options. (See menu options 1008 until 100D for more information.) Example : C:\CONCORD\TEMP\ Option : Work path Description : Directory where Concord will place working files it needs to perform certain actions, like generating an off-line mail packet for QWK. Example : C:\CONCORD\WORK\ Option : Nodelist path Description : Directory where your nodelists can be found. If you are using a mailer, this directory is probably already available and you should point it to the same place as defined in your mailer. Example : C:\IM\NODELIST\ ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 11 Option : File attach path Description : Directory where the directories are created when a user is attaching a file to another user on your BBS. Example : C:\CONCORD\LOCAL\ Option : File base path Description : Directory where the filebase files (*.hdr and *.txt files) are stored. Example : C:\CONCORD\FILEBASE\ Option : External chat Description : Option to specify an external chat program. When this is left empty, Concord will use the internal chat option. You can also specify options for Concord on this command line. (See menu option 0009 for more information on these options.) Example : C:\UTILS\CHAT.EXE *T *N Option : Virus scanner Description : Option to specify a virusscanner for scanning files on the BBS and after uploading. You will have to specify all options for the scanner. When no virusscanner is defined on this command | line, Concord will not do a virusscan. You | can also specify an external utility, like | Palmscan, to do the viruscheck. In this case | the utility will call the virusscanner. Example : C:\UTILS\F-PROT /NOMEM /OLD %1 Option : JAM base path Description : Directory where the semaphore files for the JAM message base are created. This should be the same directory as specified in your Echo/Netmail tosser, like Gecho. Example : C:\M_AREA\JAM\ Option : Local move path Description : Directory to which to move files when a local user is accessing the BBS. This is for example for the offline mail packets. Example : C:\CONCORD\STORAGE\ | Option : Lng files path | Description : Directory where your language files can be | found | Example : C:\CONCORD\LNG\ | | Option : .CTL files path | Description : Directory where the control files | (extensions .CTL) are stored. | Example : C:\CONCORD\CTL\ ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 12 | Option : Vote path | Description : Directory where the vote questions and | answers are stored. | Example : C:\CONCORD\VOTE\ 2.7.1.4 Message system ----------------------------------------------------------------- This part of the configuration is about the message system in Concord. Here some general options are defined. Most area specific options are set in the message area part of the configuration. Option : Quote string Description : Text used in message replies to distinguish the difference between your text and the quoted text. The quoted text will be preceded by the characters defined in this option. The standard quote string in Concord will give you the first characters of the first and lastname of the writer of the | message you are replying to. The smiling | face, which is the representation for the | initials, is generated by pressing Ctrl-P | and Ctrl-A. Example : > Option : Check user base Description : This option allows Concord to check if the user you are writing a message to in a LOCAL mail area, really exists in the userbase. Concord will inform you if a user does not exist when this option is on. Choices : Yes/No Option : Cursor E msg hdr Description : Option to tell Concord if a message header is needed in quickscan cursor. Choices : Yes/No Option : Fast jump to end Description : Option to allow Concord to jump to end of messages in the quickscan. Choices : Yes/No Option : Default origin line Description : This string will be added to every echomail message sent from your system. The maximum length for this string is 80 characters, including your node number and the '* Origin: ' which Concord will place in front of your origin line. You are not allowed to use extended ASCII or ANSI codes in this >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 13 line, because not all systems connected to FidoNet can handle these characters. You can select a different origin for every single echo in the message area part of the configuration. When no origin line is defined there, the one defined here is used. Example : NNN BBS - Concord REG/SUPP Site Holland Option : Min disk space | Description : Minimal disk space in Kbytes available needed to export a BlueWave/QWK/Omen message packet. If there is less space then defined, Concord will not pack and export messages. Example : 400 Option : Max msgs to pack Description : Maximum number of messages to be packed in one message packet created for the BlueWave/QWK/Omen mail system. Example : 1000 Option : Allow macros Description : Allow the use of the @xxxxx@ macros in messages. Choices : Yes/No Option : Split messages Description : Split messages that are more then xx lines into more then one message. Some QWK mail readers have problems reading messages that are longer then 68 lines. With this option, you could prevent that the rest of the message is lost. Concord will add the rest of the lines to another message. Example : 68 Option : Dupe list size Description : Number of messages to keep track of in the dupe list for the BlueWave/QWK/Omen mail system. Example : 1000 Option : Read margin Description : This option defines the right margin when reading messages. this makes Concord wrap lines that are longer then the number specified here. This should normally be 78 | or 79. Leave this to 0 for faster mail | handling, since this option is using lot of | the CPU power. Example : 79 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 14 Option : Quote margin Description : Same as above, except now for quotes in the | messages. This should be around 65. Leave | this to 0 for faster mail handling, since | this option is using lot of the CPU power. Example : 65 | Option : Password failure area | Description : Mail area number a user can write a message | in when failing all password tries. Make | sure that every user can write in this area. | Example : 1 2.7.1.5 File system ----------------------------------------------------------------- Here you specify the general options for the file system in Concord. Note that you can specify options for every single file area in the file area part of the configuration. Option : Nervous file check Description : This option makes Concord check the file | list integrity at all times. This means that | Concord will check the directory to see if | the file is really there and not just listed | in the filebase as being there. If the file | is not there, Concord will replace the file | information with the word OFFLINE. Choices : Yes/No Option : Import FILE_ID.DIZ Description : Most files on bulletin boards have a textfile which contains a description of the file. This file is mostly called FILE_ID.DIZ and should be a straight ASCII file of maximum 7 lines of 49 characters each. This file can be imported, if found after an upload, into the filebase. This will replace the description the user is giving for the file. Choices : Yes/No Option : Check ratio files Description : Number of files downloaded after which Concord has to check the ratio settings from the user to see if the limits have been reached. If you set this to 0, no ratio check will be performed. Example : 5 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 15 | Option : Prescan FILES.BBS | Description : Concord will scan the FILES.BBS directory | before doing a file list to speed up the | listing. This is a memory hungry option, so | if you do not have enough memory available, | leave this option off. | Choices : Yes/No | | Option : Allow split descriptions | Description : Concord can show files in two different | ways. When this option is turned ON, file | descriptions will be shown, even if the | whole description of the last file on the | page does not fit on the page and is | continued on the next page. When this option | is turned OFF, the file that can not be | shown with the full description is moved to | the next page and is displayed after the | user selected the next page. | Choices : Yes/No | | Option : Ext. upload checker | Description : Normally Concord will extract an newly | uploaded file and check the file for | viruses. But sometimes you want to use | something else, like an external program | with more options. If you do so and don't | want Concord to extract the file, set this | option to Yes. | Choices : Yes/No | | Option : Findfirst on CDROM | Description : Concord only checks the filebase database | when showing files in a CD-Rom area. When | you have a fast CD-Rom drive, you can turn | this option on, which will force Concord to | check the CD-Rom drive to see if the file is | really there, before displaying it. Do not | use this option on slow CD-Rom drives as it | will slow down files display. | Choices : Yes/No | | Option : FILES.BBS counter | Description : Concord will add a download counter to the | description of the uploaded file when this | option is used. Change the setting of this | option with the SPACEBAR. None means no | download counter is added. | Choices : None/[00]/[000]/[0000] | | Option : Max. file description lines | Description : This option allows you to limit the number | of lines displayed as a file description. | Example : 24 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 16 2.7.1.6 User config ----------------------------------------------------------------- Without users a BBS system would be useless. That's why there is a user config option in the configuration program. Here you can define flags and set some general options for all users and how your system treats users. Option : Flag description Description : When the cursor in the configuration program is on this option, you can press SPACE (or F10) and a window will appear. In this window you can define the flags A1-A8 to J1-J8. You can enter a description for every flag. Keep them short and meaningful is the best way of doing it. These descriptions are shown to you when you have to set flags in the file areas, message areas and menu options. You can use the PgUp and PgDn keys to change the flag group. Use the cursor keys to move within the different flag | groups or press the corresponding character. | for example J and 8 will get you to flag J8. Pressing ESC will close the window and save the descriptions as you've entered them. Example : A1 - New users A2 - Normal user B2 - CD-Rom access J8 - Sysop Option : One word names Description : This option allows you to use one word names on your BBS system. Very useful if you are running a system with aliases and no real names. Normally Concord expects a first and last name. With this option turned on only one name is needed, however more name parts can be entered. For example login on with 'Jim' is allowed, but 'Jim Master' is also allowed. Concord will know that these are | different users. Note that when you are | running an 'Alias' system, that you need to | change some of the language lines, because | by default the 'Real' name is displayed. Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 17 Option : Expiration days Description : Days given to every new user in the 'expiration date field'. Concord will take a day of this number every day. This allows | you to run a scriptfile after a certain amount of days and change some of the users settings. You can change this setting for specific users in the user editor. Example : 30 Option : Verify calls Description : Concord has the option to ask the user for his/her birthday every X calls. This option allows you to set that number of calls. When the wrong date of birth is entered, Concord will disconnect. Example : 15 Option : Include Sysop Description : If you want yourself as the Sysop to be shown in the last callers list. set this option to Yes. If you don't want your users to see that you logged in, set this to No. In that case you're name will not appear in the last callers list. Choices : Yes/No Option : Password tries Description : Number of times a user can enter his/her password at the logon prompt when the | password is not correct. If the user fails | all tries, he/she can write a message to the | Sysop. This does depend on the fact that a | mail area is specified in the message | configuration. Example : 3 Option : Hide upper sec Description : Do not show security levels that are higher then the one from the user in the user list. Choices : Yes/No 2.7.1.7 Net address ----------------------------------------------------------------- Most BBS systems are connected to one or more networks. This allows them to exchange mail between systems. When you are joining a network, you will be assigned a node number. This node number is specifically for your system, like your street address is for your house. In this part of the configuration, you specify which addresses you have. You can also enter the name of the network and the netmail board number as defined in the message areas. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 18 When you are entering mail areas you will have to enter a network address when it is an echomail area or netmail area. If you have for example 5 network addresses and delete the second one, you will notice that the line does not disappear, but changes to 0:0/0. This is done because these addresses are linked to the mail areas. If you would delete a network address and move the others up, your mail areas would suddenly use a different network address. If you delete the last network address of the 5 defined, it will really be removed and not changed to 0:0/0. You can use the following keys in this window: ALT-A : Add address. This will add an empty line at the bottom of the list. ALT-D : Delete address or change it to 0:0/0 when there are other network numbers below. ESC : Return to previous menu The 'Total' number in the right upper corner displays the number of network addresses defined. Option : Name Description : Name of the network. Mostly the network has a Domain name and you can enter that here or you can enter any name you like so you know which network you're talking about. Example : FidoNet Option : Address Description : The network address assigned to you by the network administrator. Address are entered in the following format: Zone:Net/Node.Pointnumber Do not make up a number yourself. If you are not connected to a network, leave these fields blank. Example : 2:2802/169.0 2.7.1.8 Limits ----------------------------------------------------------------- With the Limits part of the configuration you specify what every userlevel can do on your BBS. This is the main part of your security system. Here you specify how long a user can be online, how much he/she can download, what ratio checks are applying to the user and more. Security levels can range from 0 to as high as 65000. Take some time to think about how many levels you need and what security levels you assign to them. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 19 When a certain userlevel is not defined, the first one below that level will be used. If you defined level 10 and 20, but your user has level 15, Concord will use the settings from the level 10 settings. You can use the following keys in this window: ALT-A : Add user level. This will add an empty user level line above the currently highlighted level. ALT-D : Delete user level. ESC : Return to previous menu. You can use the SHIFT key in combination with the arrow keys to move the userlevel to another location in the list. Press SHIFT when you are on the level you want to move and move the level with the arrow keys. Editing the userlevel is done by pressing ENTER when the wanted userlevel is highlighted. This will display another window where all settings for this userlevel can be edited. The 'Total' number in the upper area of the window displays the number of levels defined. When ENTER is pressed another window appears with the following options: Option : Active? Description : Informs you as the Sysop if this level is activated or not. When inactive, this level is not used by Concord. If the level is inactive, this is shown in the list window as a flag in front of the level. Choices : Yes/No Option : Security level Description : The security level assigned to this level. Ranging between 0 and 65000. Do not use the same level twice, unless you are using the Valid to/Valid from option explained below. This level is shown in the list window. Example : 20 Option : Description Description : A short explanation of what this userlevel is for. This is also show in the list window. Example : Normal user Option : Valid from Description : Time in 24 hour format from which the user is allowed to logon to your system. This is also shown in the list window. Example : 13:45 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 20 Option : Valid to Description : Time in 24 hour format until which the user is allowed to logon to your system. This is also shown in the list window. Example : 23:45 Together with the Valid from option, this allows you to specify time slots for your users. You could setup the same userlevel but with different settings by using these two time options. For example: Security : 25 and: 25 Valid from : 00:00 18:00 Valid to : 18:00 24:00 Timelimit : 60 45 Dl limit : 1000 500 This would allow you to minimize user access at peek system times, so more users can access your system. Option : Max DL/UL KB ratio Description : The users download/upload ratio in Kilobytes. This means that if a user downloaded XX Kbytes, he/she has to upload YY Kbytes before another download can be done. For example setting this option to 2 means that a user can download 200 Kbytes for every 100 Kbytes uploaded. When this option is set to 0, ratio on Kilobytes is disabled. Example : 15 Option : Max DL/UL times ratio Description : The users download/upload ratio in files. This means that for every X file(s) uploaded, the user can download Y file(s). For example setting this option to 2 means that a user can download 2 files for every 1 file uploaded. Setting this option to 0 disables the ratio check on files. Example : 5 Option : Time limit Description : Time in minutes a user is allowed per day to stay online. When this time is expired, the user will see a warning and has to wait till the next day. Setting this option to 1440 means that the user can stay online all day. (24 Hrs = 1440 min.) Example : 120 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 21 Option : Call limit Description : Number of calls a day the user is allowed to make to your system. If the user exceeds this limit, he/she is not able to logon to the system any more that day, eventhough he/she might have enough time left for the day. Setting this option to 0 disables the check. Example : 5 Option : Download limits | Description : Number of Kilobytes and files a user can download per day. This is depending on the connecting speed of the user. If the user is connecting on a speed not listed in the limits editor, Concord will use the first defined speed settings below the users connecting speed. For example a connecting speed of 16800 will use the 14400 settings. When a user exceeds the defined limits, a warning is displayed and the user cannot download anymore. Example : 1200 2.7.1.9 Events ----------------------------------------------------------------- Events are actions performed by the system at certain times at certain days of the week. This allows you to run maintenance, clean up actions and other activities at quiet moments. You will have to setup Concord with a batchfile and errorlevels if you want to use this option, otherwise Concord will exit at the given time and weekday, but never returns. You can use the following keys in this window: ALT-A : Add event. This will add an empty event line above the currently highlighted event. ALT-D : Delete event. ESC : Return to previous menu. You can use the SHIFT key in combination with the arrow keys to move the event to another location in the list. Press SHIFT when you are on the event you want to move and move the event with the arrow keys. Editing the event is done by pressing ENTER when the wanted event is highlighted. This will display another window where all settings for this event can be edited. The 'Total' number in the upper area of the window displays the number of events defined. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 22 When ENTER is pressed another window appears with the following options: Option : Active Description : Informs you as the Sysop if this event is activated or not. When inactive, this event is not used by Concord. If the event is inactive, this is shown in the list window as a flag in front of the event. Choices : Yes/No Options : Forced Description : If an event is scheduled, but a user is on-line at the given time, the event will be overdue and not be executed. When you force an event to be executed, Concord will reduce the time of the caller on-line, so he/she will be logged of just before the event starts. A warning message will be displayed to the user, telling him/her the time on-line is adjusted. Concord will not allow callers on-line within five minutes before the event. Choices : Yes/No Option : Error level Description : This is the errorlevel Concord exits with at the time of the event. This allows you to start an external program from your batchfile. Do not use errorlevels between 0 and 10 as these are used by Concord. Consult your DOS manual if you are unfamiliar with the use of errorlevels. Errorlevels may range from 10 to 255. Example : 124 Option : Run time Description : Time for the event to be executed in 24 hour format. Example : 16:30 Option : Days to run Description : The days on which to execute the event. You can select/deselect every day of the week. The days will show in the list window with there first characters. Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 23 | Option : Last run date | Description : Date the event was run for the last time. | This allows you to run certain events again, | or skip them for a period. Concord checks if | the day in this field is equal+1 to the | current date before executing the event. | Example : 04/11/95 2.7.1.10 Transfer protocols ----------------------------------------------------------------- To start with the bad news first, there are no internal protocols for Concord. Every protocol used by the program is an external one. The good news is, just like with anything else in Concord, you can have as many as you want. You can use the following keys in the file transfer window: ALT-A : Add transfer protocol. This will add an empty transfer protocol line above the currently highlighted transfer protocol. ALT-D : Delete transfer protocol. ESC : Return to previous menu. You can use the SHIFT key in combination with the arrow keys to move the transfer protocol to another location in the list. Press SHIFT when you are on the transfer protocol you want to move and move the transfer protocol with the arrow keys. Editing the transfer protocol is done by pressing ENTER when the wanted transfer protocol is highlighted. This will display another window where all settings for this transfer protocol can be edited. The 'Total' number in the upper area of the window displays the number of transfer protocols defined. When ENTER is pressed another window appears with the following options: Option : Active Description : Informs you as the Sysop if this transfer protocol is activated or not. When inactive, this transfer protocol is not used by Concord. If the transfer protocol is inactive, this is shown in the list window as a flag in front of the transfer protocol. Choices : Yes/No Option : Description Description : Name of the transfer protocol as it is shown to your users. Example : Zmodem-32 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 24 Option : Selection key Description : Character shown to the user when he/she needs to select a protocol. You can only use a character ones. Example : Z Option : Batch Description : Informs Concord if this protocol defined here is a batch protocol or not. Batch protocols, like Zmodem, are protocols that allow the transfer of more then 1 file at a time. Choices : Yes/No Option : Bidirectional Description : Informs Concord about the fact if the protocol is a bidirectional protocol or not. Bidirectional protocols can do an upload and download at the same time, making it necessary for Concord to check for uploads when this protocol is used for a download. Choices : Yes/No Option : Download command line Description : The full line to execute this protocol for a download. You can use the following parameters which Concord will change into the necessary values: *B Current BPS rate *C Current comspec setting *N Current node *P Current com port *T User's time left %1 File name | %3 Next file in queue This part of the file transfer configuration is probably the most difficult. If you have problems getting a transfer program to work, contact the Concord Support sites or use the Concord echomail area. Use the full path to call the protocol. Most protocols allow the use of the @ character to allow the specification of a list of files to be transferred. See also 'Ctl file name' option | below. For some protocols, like DSZ, it | might be necessary to start a new command | processor before executing the protocol. | This is done by adding *C /C in front of the | command line. Example : See examples below ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 25 Option : Upload command line Description : Same as the download command line, except now for the upload command. For some bidirectional transfer programs these two lines may be the same. Use the full pathname when calling the protocol. Example : See examples below Option : List char Description : Character that indicates that the following parameter is a list file. For most protocols this character is the '@', without the quotes. The listfile contains the names of the files to download. (See below) Example : @ Option : Efficiency Description : Efficiency of the protocol in percentage. This is normally between 90 and 98 percent. Concord uses this percentage to calculate the amount of time needed for the transfer. If you set this to low, your users might not be able to download a file in the time left on the BBS, which in fact could have been downloaded, if you had told Concord the correct efficiency percentage. Example : 96 Option : Log file name Description : Name of the logfile that is made by the protocol. This allows Concord to read the logfile and retrieve information from it. If this field is left empty, Concord will search for the DSZ environment variable and use that one instead. Example : C:\PROTOCOL\DSZ.LOG Option : Ctl file name Description : Name of the control file used by the transfer protocols as a list of files to transmit. This file is generated by Concord and used by most transfer programs. With most protocols it is specified on the commandline preceded by the @ character. Example : C:\PROTOCOL\FILES.CTL ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 26 Option : Upload log keyword Description : Character that indicates in the logfile that an upload has been performed. Note that this is a case sensitive character, in other words a 'Z' is something else then a 'z'. | Every protocol should have a different | character, most characters are prefixed for | a protocol. (See the DSZ documentation for | more information on this subject.) Example : Z Option : Download log keyword Description : Character that indicates in the logfile that a download has been performed. Note that this is a case sensitive character, in other words a 'Z' is something else then a 'z'. Example : z | Here are some keyword characters for some protocols: | | Name: Zmodem Download: z Upload: Z | Ymodem(-G) S R | HS/Link h H | Hydra h H | SModem s S | | Option : Read whole DSZ.LOG | Description : If you want Concord to read the whole | DSZ.LOG file after a download, turn this | option on. Normally Concord will know what | the last entry was and only reads the new | lines in the log file. | Choices : Yes/No | | Here is an example for a protocol. This is for the 'free for non | commercial use' CEXYZ Zmodem by Cutting Edge Software protocol and is being used on my own BBS system. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 27 CEXYZ Zmodem setup: Activated : Yes | Description : CEXYZ Zmodem Selection key : T Batch : Yes Bidirectional : No Download cmdline : c:\protocol\cexyz.exe /p*P /L38400 /b*B /sz @c:\protocol\files.ctl Upload cmdline : c:\protocol\cexyz.exe /p*P /L38400 /b*B /rz c:\upload\ List char : @ Efficiency : 95 Log file name : c:\protocol\dsz.log Ctl file name : c:\protocol\files.ctl Upload ctl key : Z Download ctl key : z | Read whole DSZ.LOG : No Please refer to the Support sites or the Concord echomail area if you have trouble setting a protocol up. Please remember that most protocols are shareware and should be registered separately. All external protocol are independent programs, not belonging to Concord and not included in the Concord archive. Copyrights belong to their respective owners. 2.7.1.11 File archivers ----------------------------------------------------------------- You can use the following keys in the archiver window: ALT-A : Add archiver. This will add an empty archiver line above the currently highlighted archiver. ALT-D : Delete archiver. ESC : Return to previous menu. You can use the SHIFT key in combination with the arrow keys to move the archiver to another location in the list. Press SHIFT when you are on the archiver you want to move and move the archiver with the arrow keys. Editing the archiver is done by pressing ENTER when the wanted archiver is highlighted. This will display another window where all settings for this archiver can be edited. The 'Total' number in the upper area of the window displays the number of archivers defined. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 28 When ENTER is pressed another window appears with the following options: Option : Active Description : Informs you as the Sysop if this archiver is activated or not. When inactive, this archiver is not used by Concord. If the archiver is inactive, this is shown in the list window as a flag in front of the archiver. Choices : Yes/No Option : Description Description : Name of the archiver as it is shown to your users. Example : PKZip 2.04G Option : Selection key Description : Character shown to the user when he/she needs to select an archiver. You can only use a character ones. Example : Z Option : File extension Description : Extension of the archived file. This is used by Concord when it creates an archive. Example : ZIP Option : Compress command line Description : Command line to activate the archiver to compress a file. You should use the full path to the archiver for safety reasons. There are 2 options available: %1 Filename to create %2 Filename to compress in %1 You can use all options available to the archiver. Example : C:\ARCHIVER\PKZIP -XM %1 %2 Option : Uncompress command line Description : Same as above except now for decompressing. There are 2 options available: %1 Compressed file %2 Filename to extract from %1 You can use all options available to the archiver. Example : C:\ARCHIVER\PKUNZIP -O %1 %2 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 29 Option : List char Description : Character that indicates that the next parameter is a list file. Example : @ Option : Efficiency Description : Difference in percentage between the original size and the compressed file size. The higher this number the better the compression. For ZIP this is around 45%, ARJ is around 40% and LHA around 39%. Example : 45 Option : Archive ID Description : Piece of code found in compressed files, identifying the compressor used. The following parameter is available: @[+|-]<num>; warps + = from begin - = from end Some ID characters need special key combinations to create. Example : PK Here is an example of the UltraCompressor archive. This example is by Ryan Murray. Active : Yes Description : UltraCompressor Selection key : U File extension : UC2 Compress cmdline : c:\archiver\uc.exe a -bttf %1 %2 Uncompress cmdline : c:\archiver\uc.exe e -f %1 %2 List char : @ Efficiency : 30 Archive ID : UC2 The Archive ID's last character can be entered with Ctrl-P, then hold down the Alt key while pressing 26 on the numeric keypad. 2.7.1.12 Full screen editors ----------------------------------------------------------------- | Concord has a build in line editor, but using full screen editors | is far more easy for most users. All editors, including the | internal one, need to be defined in this part of the | configuration. You can use the following keys in the FS editor window: ALT-A : Add FS editor. This will add an empty FS editor line above the currently highlighted FS editor. ALT-D : Delete FS editor. ESC : Return to previous menu. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 30 You can use the SHIFT key in combination with the arrow keys to move the FS editor to another location in the list. Press SHIFT when you are on the FS editor you want to move and move the FS editor with the arrow keys. Editing the FS editor is done by pressing ENTER when the wanted FS editor is highlighted. This will display another window where all settings for this FS editor can be edited. The 'Total' number in the upper area of the window displays the number of FS editors defined. When ENTER is pressed another window appears with the following options: Option : Active Description : Informs you as the Sysop if this FS editor is activated or not. When inactive, this FS editor is not used by Concord. If the FS editor is inactive, this is shown in the list window as a flag in front of the FS editor. Choices : Yes/No Option : Description Description : Name of the FS editor as it is shown to your users. Example : Quicked Option : Selection key Description : Character shown to the user when he/she needs to select a FS editor. You can only use a character ones. Example : Q Option : Command line Description : Command line to execute the FS editor. All normal Concord options can be used on this | command line. When using the internal | editor, you will have to specify the '*' | character on this line. Example : C:\EDITOR\QUICKED.EXE %1 %2 %3 %4 There are several editors available. Please note that most are shareware and should be separately registered. | There is no external editor included in the Concord archive. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 31 2.7.1.13 Character sets ----------------------------------------------------------------- Concord can handle several different character sets. This allows you to let users who use different character sets, like some of the Scandinavian countries, to use your BBS without running into difficulties because of unsupported characters. You can use the following keys in the Character set window: ALT-A : Add Character set. This will add an empty Character set line above the currently highlighted Character set. ALT-D : Delete Character set. ESC : Return to previous menu. You can use the SHIFT key in combination with the arrow keys to move the Character set to another location in the list. Press SHIFT when you are on the Character set you want to move and move the Character set with the arrow keys. Editing the Character set is done by pressing ENTER when the wanted Character set is highlighted. This will display another window where all settings for this Character set can be edited. The 'Total' number in the upper area of the window displays the number of Character sets defined. When ENTER is pressed another window appears with the following options: Option : Active Description : Informs you as the Sysop if this Character set is activated or not. When inactive, this Character set is not used by Concord. If the Character set is inactive, this is shown in the list window as a flag in front of the Character set. Choices : Yes/No Option : Description Description : Name of the Character set as it is shown to your users. Example : Default Option : Selection key Description : Character shown to the user when he/she needs to select a Character set. You can only use a character ones. Example : D ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 32 Option : Modify input Description : Concord normally only filters the outgoing characters. But it is possible to also filter incoming characters. You will have to switch this option on if you want to filter incoming characters. Choices : Yes/No 2.7.1.14 Keyboard macros ----------------------------------------------------------------- Keyboard macros allow you to use often used lines and programs quickly by pressing a key combination. Concord allows to types of macros. The first is the 'keyboard macro', the second one the 'Execute program macro'. The Shift-F1 to Shift-F10 keys are available to 'keyboard macros. These are often used lines of text. Move to the position you want the macro to be with the cursor keys and enter the information. Example: Hello world! The second row of 10 lines is the 'Execute program macro' definition field. Here you specify programs to be executed when the Ctrl-F1 to Ctrl-F10 keys are pressed. An example: *C 2.7.1.15 Other settings ----------------------------------------------------------------- Option : Node number | Description : Number of lines on your BBS. Enter 1 for a single line system. Example : 3 Option : Local colours Description : Show colours locally. If you have a monochrome monitor, you might want to set this option to No. Choices : Yes/No Option : Password Description : Local keyboard password. This allows you to lock the keyboard. Remember, this is only locally, not remotely. Example : ********** ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 33 Option : Time out Description : Time out period in seconds for the user. If he/she didn't press the remote keyboard within this time period, Concord will disconnect. If you set this option to 0, no time checking is done. Example : 300 Option : Login time Description : Time in minutes the user can take to logon to your system. If this time expires, the user is disconnected. Don't make this period to short, otherwise your new users won't be able to login. Example : 30 Option : OS Shell Description : Commandline for Concord when Concord needs to shell to the operating system. You can use the following options here: *B Current BPS rate *C Current Comspec *D1- No DORINFO1.DEF file created *D2- No DOOR.SYS file created *D3- No EXITINFO.BBS file created *E- No EXITINFO.DAT file created *F User's first name *G User's colour mode *J User's screen length *L User's last name *N Current node *P Current COM port *R User's record number *T User's time left *S Amount to swap The *S option takes a parameter defining the | amount of memory to swap. With *S0 Concord | never swaps to disk before running an | external program, with *S<amount> Concord | always swaps to disk or EMS before running | an external program. Example : *C *S300 Option : Last callers Description : Number of last callers displayed in the last callers list. When 0 is entered, the default of 15 is used. Example : 30 Option : Sysop seclvl Description : Sysop security level. Example : 32000 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 34 Option : Verify BBS Description : How many days between the times that the BBSses in the BBS list are verified. Example : 90 Option : DORINFOn.DEF Description : For multiline systems, Concord can generate DORINFOn.DEF files where the n is replaced by the node number. For line 2, this would be DORINFO2.DEF. If this is set to no, all lines generate a DORINFO1.DEF file. Choices : Yes/No Option : Detect scrlen Description : Concord can automatically detect the screen length the user is using when he/she logs on to your system. If you don't want this set this option to No. Choices : Yes/No Option : Login charset Description : Characterset to use at logon, before Concord can determine who is online. Example : 0 | Option : Force ANSI | Description : This option allows you to force the | emulation to ANSI when ASCII is detected at | login of the user. | Choices : Yes/No | | Now for the Yell and Multi line settings. You need to press | SPACE, F10 or ENTER to open the edit window for these options. Option : Yell device Description : Device to use when the user is paging the Sysop. This can be three different options. The first is PC-Speaker, default for most systems. The second is Automatic, in which case Concord will see what is available and use that. This could be a soundcard if available. The last option is None. In this case the page will not be heard because no sound device is used. Choices : PC-Speaker/Automatic/None Option : Yell times Description : Number of times a user is allowed to page the Sysop. Example : 3 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 35 Option : Yell length Description : Time in seconds that a yell will last before a message is displayed to the user. Example : 30 Option : Sun from Description : Starting time in 24 hour format of the period that the Sysop can be paged. Example : 17:30 Option : Sun to Description : Ending time in 24 hour format of the period that the Sysop can be paged. Outside this period specified with these options, a message is displayed telling the user the Sysop is not available for a chat. Example : 23:30 This option is available for every day of the week. This allows you to have different yell times on different weekdays. Option : Online msgs Description : Time period in seconds after which Concord will check to see if there is a message from the other lines on a multiline system for the user. Set this to 0 if you don't want message checking. Example : 10 | Option : Erase multi line chat | Description : Tells Concord to erase the multi line chat | textfile after use. | Choices : Yes/No | | Option : Check multi line chat | Description : Checks every n seconds for new lines in the | multi line chat. When 0 is specified, | Concord will only check for new lines when | the textfile is updated. | Example : 5 | | Option : No CHAT.LOG | Description : If you don't want a log file from your chats | with users, turn this option off, otherwise | a file called CHAT.LOG is created or | appended to when a chat is starting. | Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 36 | Option : No user exit | Description : When you don't want your users to exit the | chat, turn this option on. Now only you can | terminate the chat. | Choices : Yes/No | | Press ESC to return to the previous menu. | | Option : No ANS detect | Description : Concord can detect the terminal emulation | used by the person login in to your system. | This can cause problems with some systems. | If you don't want this automatic emulation | detection, turn this option on. | Choices : Yes/No | | Option : Hidden character | Description : When Concord displays text the is suppose to | be hidden, like the password entry at logon, | the character defined here will be used. | Example : * | | Option : ANSI stop character | Description : Character(s) which will stop the displaying | of an ANSI/ASCII file. When nothing is | entered, the character S is used to stop the | display. | Example : ^C | | Option : Status line colour | Description : Colour of the line displayed at the bottom | of the screen. The number 112 is the normal | black on grey colours. | Example : 112 | | Option : Convert $ENV | Description : This option is useful for multi node systems | as it allows you to have one configuration | for several lines. Concord will replace the | $ENV variable with the pathname for the node | it is running. | Choices : Yes/No 2.7.2 Message areas ----------------------------------------------------------------- This is the part of the configuration that defines the mail areas on your BBS. Each area is a group of messages related to each other by subject. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 37 2.7.2.1 Supported message bases ----------------------------------------------------------------- Concord supports the following types of message bases: Type : Hudson Message Base (HMB) Description : This is the message base system used in SuperBBS, QuickBBS and RemoteAccess. It consists of a database file where all messages are stored. There are also some index files. All defined areas are in 1 main and 3 index files. Advantage : Quick to search. Just 4 files on your HD. Disadvantage : Maximum of around 13000 messages. With disk problems, you could lose the whole message base. Type : Multiple Hudson Message Base Description : Several separate Hudson message bases. The message base files are located in different directories. Advantage : Quick to search, many more messages then single HMB. Only 4 files per message base. Disadvantage : Not supported at this moment by most echomail tossers. Disk problems can still cause the loss of many messages in several areas. Type : JAM Description : This type of messagebase is the least sensitive to diskproblems, because every message area you define has it's own 4 files. Size of the messagebase is only limited by diskspace. Advantage : Unlimited size. Separate files for every area. Disadvantage : Slow to search. Can take up a lot of diskspace. Type : .MSG Description : The oldest message base around. Every message is stored as a single file. This can take up huge amounts of diskspace. This type of message base is normally only used for the netmail area of the mailer. Advantage : Every message has it's own file, so diskproblems could have minor damage results. Disadvantage : Takes up huge amounts of diskspace, depending on your disk allocation size. Normally very slow in searching messages. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 38 It depends on your system which message base is the best for you. If you only have a few message areas and not many messages, the HMB type message base is the best. If you have many areas with great amount of messages, use JAM. Concord will support other mail formats in the future. 2.7.2.2 Message areas configuration ----------------------------------------------------------------- Press ENTER when the selection bar is on the 'Msg areas' in the main menu bar and you will be presented with a window which has the following options: ALT-A : Add message area. This will add an empty message area line at the end of the list. ALT-D : Delete message area. This only marks the area to be deleted. You need to use the F5 key to really delete the area. F5 : Purge all deleted message areas. Until you pressed this key, you can still undelete a message area. F8 : Change global settings. (See 2.7.2.3) ESC : Return to previous menu. You can use the SHIFT key in combination with the arrow keys to move the message area to another location in the list. Press SHIFT when you are on the message area you want to move and move the message area with the arrow keys. Editing the message areas is done by pressing ENTER when the wanted message area is highlighted. This will display another window where all settings for this message area can be edited. The 'Total' number in the upper area of the window displays the number of Message areas defined. When ENTER is pressed another window appears with the following options: Option : Name Description : The name of the message area as it is displayed in Concord to the users. Example : Local messages Option : Active Description : Informs you as the Sysop if this message areas is activated or not. When inactive, this message areas is not used by Concord. If the message areas is inactive, this is shown in the list window as a flag in front of the message areas. Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 39 Option : Short name Description : The name used by the offline mail system for this message area. This name is only used in the QWK/BlueWave/Omen mail system. The name specified above is used in the BBS system itself. Example : Local msgs Option : Group Description : A three character word describing the group that this message area is belonging to. Concord allows you to have different groups and some of the menu commands can handle these groups. You are allowed to use less then 3 characters. If you don't want to use a group description, you will have to change many textlines in the language file (see chapter 3), because the group macro is used in the language file. Here are some examples of group descriptions: LOK General local mail NAT National echomail areas INT International areas You are free to define your own groupnames, these where only given as examples. Example : LOK Option : Format Description : Type of message base for this area. Concord allows you to use multiple message bases together at the same time. See chapter 2.7.2.1 for a description of the different message base types. Choices : JAM/.MSG/Hudson Option : Path name Description : The full path to where the message base files are stored. This line can have various definitions, depending on the message base type used: JAM message base: You will have to specify the full path AND the name of the message area files to use, WITHOUT the extension. For example: C:\MAIL\JAM\GENERAL ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 40 The 'GENERAL' in this line is not a directory but the name of the files for this message area. Concord will create the files. There will be four files created with the defined name. (That's why you should not give an extension!) .MSG message base: You only specify the directory where the message files for this area will be stored. Remember that every message will have it's own .MSG file. You will have to make different directories for every message area you have, because the messages are all numbered the same in every area. An example: C:\MAIL\MSG\GENERAL In this case the 'GENERAL' is a directory name where the .MSG files will be stored. Hudson message base: You have to specify the directory where the messagebase files are stored. Every message area should point to this same directory, unless you are using multiple Hudson message bases. An example: C:\MAIL\HMB In this case the 'HMB' is a directory where the message base files are stored. If you use multiple messages bases you can define several directories. Remember, it is not possible to store more then 1 Hudson Message Base in the same directory. Example : C:\MAIL\HMB Option : Password Description : If you define a password, Concord will ask for the password, before allowing access to the area. Example : ************ Option : Open from Description : Time in 24 hour format at which time the area will be available to the users. This time is security level independent. Example : 13:45 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 41 Option : Open to Description : Time in 24 hour format at which time the area will no longer be available to the users. In combination with the 'Open from' option, this allows you to close an area of between certain times. Example : 23:50 Option : Area type Description : There are three types of areas available in Concord: Local mail: Messages that will never leave your system. They are messages between users on your BBS. Concord will just save the message. The recipient of the messages is normally a user on the BBS and Concord can check for this and warn you if the message is to somebody who is not in the userlist. Messages can be private or public. Echomail: These messages are exported to other BBS systems. The receiver can be anybody, normally not a user on the same BBS. Echomail areas are spread all over the country and even the world. Concord will add an origin line to the message and the address to use. You could compare this type of messages with the advertisements in the paper. Everybody can read and reply to them. Echomail is never private! Netmail: These messages are destinated for a certain person at a certain BBS somewhere in the world. The are mostly private messages. You can compare this with the normal mail you receive at home. You sent it from one address to another. Concord will ask for a netmail address if you enter a netmail message. You will need to have a nodelist and a netmail number for this option to be operational. Please remember that although netmail is mostly private, every Sysop where the message is passing by can read the message. (Encryption is not much used within the BBS organisations.) Choices : Local/Echomail/Netmail ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 42 Option : Msg kinds Description : There are four types of messages available with Concord: Private messages: These can only be read by the sender and receiver of the message. Note that also anybody with Sysop level can read private messages. You should make this clear to your users. This type of messages is normally only used in netmail area types. Public messages: These messages can be read by everybody. This type of messages is normally used in echomail areas. Both: Allows both the use of private and public messages. This is normally the case with local message areas, unless you want all messages to be private. Read only: This type of message area allows you only to read the messages and not reply to them or write new messages in the area. Choices : Private/Public/Both/Read only Option : Reply status Description : Sending messages normally means getting replies. There are four options available for replying: Normal: This means that the message you made when you replied will be sent in the same area as where the original message was in. Used for local and echomail areas. Netmail: The message you wrote as a reply will be sent as netmail. Concord will take the sender's address from the origin line of the message. Used for echomail areas. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 43 Both: Concord will ask how you want to reply, by echomail or by netmail. None: Replying is not possible. Use this in combination with the 'Read only' area type to make an area read only. Choices : Normal/Netmail/Both/None Option : Alias/Name Description : This option allows you to specify which name will be used when writing a message. There are four options: Real name: Message written will have the real name as defined in Concord's userbase as the sender's name. Ask alias: Concord will ask for an alias to use as the sender of the message. Please note that this can be anything you want. This doesn't have to be the alias specified in the Concord's userbase. Also note that Concord will not check for messages received at the system with the used alias, as no list is kept of the aliases used. Concord only checks for the in the userbase defined alias and username. Both: Concord will ask if an alias will be used. If answered negative, Concord will use the real name of the message writer. Please note that the alias used in this option is the alias defined in the userbase and not the alias as described in the 'Ask alias' option. Aliases: When this option is used, the alias defined in the userbase of Concord will be used as the sender's name. Please note the difference with the 'Ask alias' option. Choices : Real name/Ask alias/Both/Aliases ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 44 Option : Use AKA Description : When entering this field, another window appears with the defined AKA's. Press ENTER and then choose the one you want to use for this area with the cursor keys and press ENTER. This option is only needed for Echomail and Netmail types of areas. Example : 2:2802/169 Option : Origin line Description : All echomail messages will have an origin line underneath the message. If you leave this option blank the default origin line will be used as defined in the general configuration part. If you want to use a specific origin line for this area, you can enter it here. This only applies to echomail type areas. With other area types this option is ignored. Example : NNN BBS - Call now: 31.188059592 - 24 Hrs Option : Allow delete Description : Allow users to delete messages. Only messages addressed to the user or written by the user can be deleted by the user. Anybody with Sysop level can delete every message, even if it is not addressed to them or written by them. Choices : Yes/No Option : Allow tag lines Description : The offline readers allow at the end of a message a line with some remark on it. This line is called a tagline. Since these lines are not allowed in every echomail area, there is this option to allow or not allow the use of taglines. Please check the echomail rules before turning this option on for the selected area. If this option is set to 'No', Concord will strip the tagline of the message if the user appended one. Choices : Yes/No Option : Allow file attach Description : Concord allows you to sent a file along with a message from one user to another. If you select 'No', this option is disabled. Do not use this option on netmail and echomail areas. Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 45 Option : Combined area Description : The combined area on the BBS is a special area where all messages are read after one other, instead of per area. If you set this option to 'No', this area is not available to the user by default in the combined area. Choices : Yes/No Option : Allow ctrl chars Description : Control characters are characters which have special meanings for Concord. When you use these characters in a message, Concord will translate them into certain bits of information. (See the chapter on control codes for more info.) You don't always want to use these characters in messages, because it can be confusing to other users who read the message. Choices : Yes/No Option : Force mail check description : Some of your users might not have an area selected for mail check, eventhough you would like them to have a mail check in that particular area. When you turn this option on, a mail check is always done on this area and the user cannot deselect the area. Choices : Yes/No | Concord allows a directory structure in the mail areas, file | areas and doors. To explain this, here is an example of a normal | structure: | | -------- Area 1 - General mail area | | | |-- Area 2 - Concord mail area | | | |-- Area 3 - Concord utilities mail area | | | |-- Area 4 - Pascal mail area | | | |-- ........ | ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 46 | As you can see, all areas are available from the same selection | menu. When using the sub-directory option in Concord, the | following structure is possible: | | -------- Area 1 - General mail area | | | |-- Area 2 - Concord areas ------ Area 3 - Concord area | | | | | |-- Area 4 - Concord utils | | | | | |-- Area 5 - Main list | | | |-- Area 6 - Programmers -------- Area 7 - Pascal | | | | | |-- ......... | | As you can see, this will group together the different type of | areas. Well, how do you set something up like this? You need one | master area, in this case area 2, which points to a group of | areas. Then you need your areas and one area to return to the | master list. Here is an overview: | | Num: Name: Subdir CurrSub WhereToJump | ---- ------------------- --------- --------- ------------- | 1 General area No 0 0 | 2 Concord area Yes 0 10 | 3 Concord mail area No 10 0 | 4 Concord utils No 10 0 | 5 Main list Yes 10 0 | 6 Programmers Yes 0 20 | 7 Pascal No 20 0 | 8 .................. .... ... .... | | So area 1 is a normal area. Area 2 points to a group of areas. | These areas all belong to the group with sub-directory number 10. | Area 3 and 4 belong to this group. Area 5 also belongs to this | group but points to another subdirectory group, group 0, which | is the main list. Area 6 points to another group, in which area | 7 is located. When a user selects the select area command, he/she | will see area 1, area 2, area 6 and other areas which have 0 as | there 'Current Sub-directory number. When area 2 is selected by | the user, he/she will see only the areas 3, 4 and 5 and maybe any | other area that has number 10 in the current sub-directory | number. When he/she selects 5, he/she is placed back in the main | group. | | Hope this will make it clear how the sub-directory structure is | working. Remember, every group needs at least one normal area | (like area 1 or 3 or 7) and at least one area to return to the | previous list. You can have links pointing from every group to | any other group to another group, to another group and so on. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 47 Option : Sub directory | Description : This option tells Concord if this area entry | is a normal area or pointing to another | group of areas. (Like area 2 in the above | example.) Normal areas have this set to No. Choices : Yes/No Option : Curr subdir num | Description : This option tells Concord to which group of | areas this area belongs. All areas which use | the same number belong together. (Like area | 3, 4 and 5 in the above example.) You can | choose any number you want for this, but | keep it simple never hurts. Every group | should have at least one normal area and one | area pointing to the main list. Example : 10 Option : Where to jump | Description : This option tells Concord to which area | group to jump. This option is used in areas | that are no real areas, but point to another | group of areas. (Like area 2 and 5 in the | above example.) Example : 0 Option : Use char table Description : Which character set is to be used in this area? This option allows you to adjust the character table to the area. This could be useful when you have Scandinavian areas on your board, because they use a different character set then most people do. When 0 is entered, Concord uses the default character set. Example : 2 Option : Hudson board Description : Which board number in the Hudson Message Base corresponds with this area. This is only needed if you use the HMB area type. (See Format.) The number can vary between 1 and 200. Example : 47 Option : Force CR in quote Description : This option determines if Concord is using a hard carriage return in quotes that are to long or not. Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 48 | Option : Force combined | Description : This option allows you to force an area | combined for all users. | Choices : Yes/No Now we come to the security bit of the message area. You can specify for every area the read message security, write message security and Sysop security. When the option you want to modify is highlighted, press the space bar to enter the window where you can modify the settings. The following settings are available: Option : Security level Description : Security level needed to read messages in this area. If the users level is lower then the level specified here, the user will not be able to read in this area. Example : 10 Option : Flags Description : Flagsettings needed for reading messages in this area. If the flagsettings of the user do not match the settings here, the user will not be able to read messages in this area. Press space bar to enter the window where you can change the flagsettings. There are three settings available, 'On', 'Off' and 'Don't care'. You can change the settings by pressing the space bar. 'Yes' means flag is on, 'No' means flag is off and no remark at the end of the line means 'don't care'. You can change the flagdescription by pressing ENTER. This means you don't have to go back to another part of the configuration program if you want to change a name of a flag. Press Escape to return to the previous window. Choices : Yes/No/Don't care Option : Age Description : Minimum age required to gain access to this area. 0 means 'don't care'. Example : 21 Option : Bps rate Description : Connection speed needed to gain access to this message area. Any speed below the specified Bps rate will not have access to this area. Any speed higher then the specified speed will have access. Example : 14400 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 49 The option mentioned here are also available in the 'Write msgs security', which specifies the necessary rights to write a message in the area, and in the 'Sysop security' option, which specifies the levels needed to gain Sysop access to the message area. Please note that everybody with Sysop level access to the message area can read every message, included private ones, in the area and has full access to all options available in the area. 2.7.2.3 Global mail area options ----------------------------------------------------------------- When you need to change some information for several areas, there is an other way of doing so then editing every single area. When you are in the list menu where all defined areas are shown, you can press the F8 key. This will bring up a window prompting you for the group name you want to edit. When you entered a groupname, or pressed ENTER when you didn't use groupnames, Concord will display another window with the options you can change globally, in other words, for all areas within the group at the same time. These options are: - Password - Open from - Open to - Read msgs security - Write msgs security - Sysop security | - Name | - Short name This allows you to quickly edit a large number of areas in one go. This option will be changed in the future. 2.7.3 File areas ----------------------------------------------------------------- Concord supports an unlimited number of file areas. These can be on harddisk's in your machine, on CD-Rom's (including CD-Rom changers) or on network drives. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 50 2.7.3.1 File areas configuration ----------------------------------------------------------------- Press ENTER when the selection bar is on the 'File areas' in the main menu bar and you will be presented with a window which has the following options: ALT-A : Add file area. This will add an empty file area line at the end of the list. ALT-D : Delete file area. This only marks the area to be deleted. You need to use the F5 key to really delete the area. F5 : Purge all deleted file areas. Until you pressed this key, you can still undelete a file area. F8 : Change global settings. (See 2.7.3.2) ESC : Return to previous menu. You can use the SHIFT key in combination with the arrow keys to move the file area to another location in the list. Press SHIFT when you are on the file area you want to move and move the file area with the arrow keys. Editing the file areas is done by pressing ENTER when the wanted file area is highlighted. This will display another window where all settings for this file area can be edited. The 'Total' number in the upper area of the window displays the number of file areas defined. When ENTER is pressed another window appears with the following options: Option : Name Description : The name of the file area as it is displayed in Concord to the users. Example : Concord main program Option : Active Description : Informs you as the Sysop if this file areas is activated or not. When inactive, this file areas is not used by Concord. If the file areas is inactive, this is shown in the list window as a flag in front of the file areas. Choices : Yes/No Option : Group Description : Group this file area belongs to. This can be any three character combination. This option allows you to group certain file areas together. No characters, or less then 3 is also possible. Example : BBS ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 51 Option : Download path Description : Place where the files are to be found for this file area. Concord will look here for the files. Example : c:\files\concord\ Option : Upload path Description : Place where uploaded files are placed. If no directory is given, this is the same as the download directory. (This is not possible when using a CD-Rom!) If you specify a directory, Concord will place uploaded files in that area. Example : c:\upload Option : Password Description : When you want to secure the area with a password, you can enter one here. Concord will ask the user for the password, before he/she is allowed to enter the area. Example : Password Option : Open from Description : Time in 24 hour format from which moment on the file area is available. Example : 07:14 Option : Open to Description : Time in 24 hours format until the area is available to users. Together with the previous option, this allows you to close certain areas on certain times. Example : 23:00 Option : Curr subdir num | Description : This tells Concord to which group the area | belongs. See the message configuration for | an example on setting up this structure | within Concord. For normal areas this should | be 0. Example : 10 Option : Where to jump | Description : This tells Concord to which group of areas | to jump. Example : 3 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 52 | Option : Offline area | Description : This option is useful for systems that | changes CD-Rom drives often. When this | option is turned off, Concord will display | the OFFLINE message when viewing the files. | This allows you to display all CD-Rom areas | available, eventhough the CD-Rom is | currently not in the drive but will be for | example next monday from 00:00 to 23:59. | Choices : Yes/No Option : New files check Description : Option to specify if Concord should include this area in the new files check. This allows you to disable new files checking on CD-Rom drives. Choices : Yes/No Option : Combined area Description : Is this file area to be included in the combined area or not. This allows you to perform certain functions on several areas. Choices : Yes/No Option : Duplicate check Description : Let Concord check this area for duplicates when somebody does an upload. Choices : Yes/No Option : Virus check Description : Is Concord to scan the uploaded file for viruses or not. Please note that this option only works when you specified a virusscanner in the Path configuration part of the program. Choices : Yes/No Option : Free files Description : This option allows you to specify if files in this area when downloaded are subtracted from the users account or not. When the files are free, the used KiloBytes and time are not deducted from the users limits. This could be useful for Allfiles lists. Please note that if this option is switched on ALL files in this file area will be free files. Choices : Yes/No Option : CD-Rom area Description : This specifies if the area is a CD-Rom area or not. If it is a CD-Rom area, a separate FILES.BBS list have to be specified, because CD-Rom's are read only. (See below) Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 53 Option : Not in list Description : Normally only files listed in the FILES.BBS file/the filebase can be downloaded. But when you switch this option on, also files available in the directory, but not listed in the FILES.BBS/Filebase can be downloaded as well. Choices : Yes/No Option : Sub-directory | Description : This option tells Concord if this area is a | pointer to a group of file areas. See the | mail areas configuration part for an example | on the sub-directory options in Concord. For | normal areas this option is set to 'No'. Choices : Yes/No Option : Force FILES.BBS Description : Normally, to gain the most speed in the filebase, you would use the database type of filelist's used by Concord. But sometimes it is needed to use the old FILES.BBS type files. (Currently Concord is not using both at the same time.) Here you can specify if the database is to be used for this area or the old style FILES.BBS files. The database is faster. Choices : Yes/No Option : Files | Description : This option allows you to change the name of | the database file used by Concord to hold | your files for this area. In the first Gamma | release, this was a fixed name, but now it | is possible to change this name to anything | you want, within MS-Dos rules. The old | system didn't allow the use of the same file | area name, this system does, because you can | change the name in this field. You can find the files specified in this field in the FILEBASE directory specified in the PATH part of the configuration program. | Example : AREA-001.* Option : FILES.BBS Description : You only need to specify something in this field if the FILES.BBS list is not in the same directory as the files or when the area is a CD-Rom area. You will have to place the FILES.BBS files for the CD-Rom area on your HD, so Concord (and other programs) can edit them if needed. Normally you would call your first CD-Rom area FILES.001, the second >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 54 FILES.002 and so on, but you are free to do it in your own way. Some external programs use the FILES.xxx type names. You could give the FILES.BBS list any name according to MS- Dos file name rules. Don't forget to specify the full path! Example : c:\files\cdrom\files.085 Now we come to the security bit of the file area. You can specify for every area the download security, upload security and list files security. When the option you want to modify is highlighted, press the space bar to enter the window where you can modify the settings. The following settings are available: Option : Security level Description : Security level needed to download files in this area. If the users level is lower then the level specified here, the user will not be able to download from this area. Example : 10 Option : Flags Description : Flagsettings needed for downloading files in this area. If the flagsettings of the user do not match the settings here, the user will not be able to download files in this area. Press space bar to enter the window where you can change the flagsettings. There are three settings available, 'On', 'Off' and 'Don't care'. You can change the settings by pressing the space bar. 'Yes' means flag is on, 'No' means flag is off and no remark at the end of the line means 'don't care'. You can change the flagdescription by pressing ENTER. This means you don't have to go back to another part of the configuration program if you want to change a name of a flag. Press Escape to return to the previous window. Choices : Yes/No/Don't care Option : Age Description : Minimum age required to download from this area. 0 means 'don't care'. Example : 21 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 55 Option : Bps rate Description : Connection speed needed to download from this file area. Any speed below the specified Bps rate will not be able to download from this area. Any speed higher or equal to the specified speed will be able to download Example : 14400 The option mentioned here are also available in the 'Upload files security', which specifies the necessary rights to upload a file in the area, and in the 'List files security' option, which specifies the levels needed to list the files in this area. 2.7.3.2 Global file area options ----------------------------------------------------------------- When you need to change some information for several areas, there is an other way of doing so then editing every single area. When you are in the list menu where all defined areas are shown, you can press the F8 key. This will bring up a window prompting you for the group name you want to edit. When you entered a groupname, or pressed ENTER when you didn't use groupnames, Concord will display another window with the options you can change globally, in other words, for all areas within the group at the same time. These options are: | - Name - Password - Open from - Open to - Download files security - Upload files security - List files security | - Download path This allows you to quickly edit a large number of areas in one go. 2.7.4 Doors ----------------------------------------------------------------- Doors, or external programs, allow you to expand your system with other programs. These can be specially written to be used with Concord or completely different programs. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 56 2.7.4.1 Doors configuration ----------------------------------------------------------------- Press ENTER when the selection bar is on the 'Doors' in the main menu bar and you will be presented with a window which has the following options: ALT-A : Add door. This will add an empty door line at the end of the list. ALT-D : Delete door. This only marks the area to be deleted. You need to use the F5 key to really delete the area. F5 : Purge all deleted doors. Until you pressed this key, you can still undelete a door. F8 : Change global settings. (See 2.7.4.2) ESC : Return to previous menu. You can use the SHIFT key in combination with the arrow keys to move the door to another location in the list. Press SHIFT when you are on the door you want to move and move the door with the arrow keys. Editing the doors is done by pressing ENTER when the wanted door is highlighted. This will display another window where all settings for this door can be edited. The 'Total' number in the upper area of the window displays the number of doors defined. When ENTER is pressed another window appears with the following options: Option : Name Description : The name of the door as it is displayed in Concord to the users. Example : Time clock Option : Active Description : Informs you as the Sysop if this door is activated or not. When inactive, this door is not used by Concord. If the door is inactive, this is shown in the list window as a flag in front of the door. Choices : Yes/No Option : Group Description : Group this door belongs to. This can be any three character combination. This option allows you to group certain doors together. No characters, or less then 3 is also possible. Example : UTI ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 57 Option : Command line Description : This is the hard bit again. Here you specify how the door should be called by Concord. Please note that some doors require a batch file, instead of just one line. Enter the full path to the door. Example : C:\DOORS\TETI\TETI.EXE -60 SPIJKENISSE Option : Password Description : Password needed to enter this door. When no password is entered, the user will not be asked for one. Example : Password Option : Open from Description : Starting time in 24 hour format from which this door is available to the users. Example : 14:30 Option : Open to Description : Closing time in 24 hour format for this door. This allows you to have doors available only on certain times. Example : 19:30 Option : Sub-directory | Description : This option tells Concord if this area is a | pointer to a group of other doors. See the | mail areas configuration for an example. Choices : Yes/No Option : Curr subdir num | Description : This option tells Concord to which group | this door belongs. Example : 2 Option : Where to jump | Description : This option tells Concord to which group of | doors to jump when this door is selected. Example : 3 Run door security is the part where you specify who has access to the door. Press SPACE when this option is highlighted and another window appears where you can specify the following options: Option : Security level Description : Security level needed to have access to this door. If the users level is lower then the level specified here, the user will not be able to gain access to this door. Example : 10 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 58 Option : Flags Description : Flagsettings needed for access to this door. If the flagsettings of the user do not match the settings here, the user will not be able to access this door. Press space bar to enter the window where you can change the flagsettings. There are three settings available, 'On', 'Off' and 'Don't care'. You can change the settings by pressing the space bar. 'Yes' means flag is on, 'No' means flag is off and no remark at the end of the line means 'don't care'. You can change the flagdescription by pressing ENTER. This means you don't have to go back to another part of the configuration program if you want to change a name of a flag. Press Escape to return to the previous window. Choices : Yes/No/Don't care Option : Age Description : Minimum age required to access this door. 0 means 'don't care'. Example : 21 Option : Bps rate Description : Connection speed needed to access this door. Any speed below the specified Bps rate will not be able to access this door. Any speed higher or equal to the specified speed will be able to use the door. Example : 14400 We will have a look at the language file in chapter 3. Leave it the way it is for now. Select QUIT from the menu bar and we will return to the installation program. 2.8 The user editor ----------------------------------------------------------------- The user files are next. CSETUP.EXE will be started in user edit | mode to create new user files. You can always start the | configuration program in user edit mode by entering CSETUP USER | at the dos prompt. Once this is done you will have to change the settings for your 'Default' user. Some of the available keys in the user editor are: F1 Display Concord documentation F2 Edit current user F3 Display userlist F4 Display/Edit flags for this user F10 Display menu >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 59 ALT-F Display/Edit flags for this user ALT-S Edit user security level ALT-D Toggle delete field PgDn Next screen PgUp Previous screen ENTER Switch to edit mode SPACE Toggle options in edit mode Arrows Move within screen when in edit mode More keys are available. See the menu for shortcuts to most of the options available. When the User editor is started, you are presented with user number 0 from your userlist. In case you started the User editor with the -CREATE option, as the installation program does, you will only have one user called DEFAULT USER. Never delete this user! This user is very important as it defines the settings for your new users calling in to your system. Here you specify which securitylevel they will have, what their default settings are and how some of the options are set. Here are the available options in the User editor for every user. Note that it is possible to change the look of the User editor by editing the control files. This list however is about the default User editor screens as supplied with Concord. | It is possible that not all options mentioned below are available | in the user editor, because the option might not have been | available in this release of Concord. 2.8.1 User editor Screen 1 ----------------------------------------------------------------- Option : Name Description : User name. For the default user this is 'Default user'. This is the name the user used to login with and this is used by most external programs when reading user information. Example : Frank Hemmelder Option : Alias Description : The alias the user entered (if any). Example : Concord doc writer Option : City Description : City as the user has entered it. Please note the difference with the address field explained later. This field is used by most external programs when reading user information. Example : Spijkenisse, NL ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 60 Option : Voice Description : The voice phone number as entered by the user at logon for the first time. Example : +31-188059592 Option : Data Description : The data phonenumber as entered by the user at logon for the first time. Example : +31.188059592 Option : Birthday Description : Users birthday in the format MM-DD-YY. This format is independent from what the user select inside the BBS. This is the format Concord stores it in the userfiles. Example : 11-18-62 Option : Sex Description : The type of human this person is. Choices : Male/Female Option : Sysop page times Description : Number of times the user has paged the Sysop. Example : 3 Option : Public msgs Description : Number of public messages the user has written on your system. Example : 12 Option : Private msgs Description : Number of private messages the user has written on your system. Example : 32 Option : Upload KB Description : Number of kilobytes the user has uploaded to your system. Example : 1272 Option : Upload files Description : Number of files uploaded to your system by this user. Example : 7 Option : Download KB Description : Number of kilobytes downloaded by the user from your BBS. Example : 3682 Option : Download files Description : Number of files the user has downloaded from your system. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 61 Option : Deleted Description : Status of this user. If this field is showing No, the user is not marked for deletion. If it shows Yes, the user is marked for deletion. Note that this does not delete the user from the userlist, only marked the record for deletion. You will need to purge the userbase, see the menu (F10) to actually delete the user. Use SPACE to toggle the current setting. This field can also be switched on or off with the Alt- D key. Do not turn this option on with your default user! Choices : Yes/No Option : SecLvl Description : Security level of this user. This can be changed by entering the new number of by pressing the Alt-S key while in viewing mode. The latter will give you a list of the securitylevels you specified in the configuration program. Example : 200 Option : Address Description : Three lines for the address of the user. You can request this by using the macros available within Concord. This will be explained in another chapter. This info is not used by external programs at this time, since it is something unique for Concord. Example : P.O. Box 270 3200 AG Spijkenisse Holland Option : Screen length Description : The screen length the user has selected. Please note that when you login locally your screenlength is adjusted to your actual screen size, although you might have a different screenlength when calling in by remote. Example : 24 Option : Password Description : The password the user has selected to use on your system. This is always hidden, unless you are on the field in edit mode. Example : *********** ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 62 Option : First call Description : Date and time of the first call to your system, according to your system time. The format is MM-DD-YY HH:MM. Example : 11-23-94 17:46 Option : Last call Description : Date and time of the last call to your system, according to your system time. The format is MM-DD-YY HH:MM. This is used by the purge by date command in the User editor to determine of the user is within the specified amount of days. Example : 11-23-95 17:46 Option : Times called Description : Number of times the user has called your system. Example : 311 Option : Minutes elapsed Description : Total number of minutes the user has been online to your system. Example : 2508 2.8.2 User editor Screen 2 ----------------------------------------------------------------- Option : Protocol Description : Default protocol for this user. The following numbers can be used: 0 This means that there is no default protocol defined. Concord will ask for a protocol everytime the user selects an up or download. 1 Default protocol is the first one defined in the protocol list. 2 Default protocol is the second protocol defined in the protocol list. 3 The third protocol a.s.o. Please note that when you change protocols the user might end up with a different default protocol because the pointer is pointing to a protocol you have changed or even deleted. The number is not connected to a specific protocol, only to the number in the list of protocols. Choices : 0,1..x (x = last number of protocol) ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 63 Option : Editor Description : Default editor for this user. The following numbers can be used: 0 This means that there is no default editor defined. Concord will ask for an editor everytime the user wants to write a message. 1 Default editor is the first one defined in the editor list. 2 Default editor is the second editor defined in the editor list. 3 The third editor a.s.o. Please note that when you change editors the user might end up with a different default editor because the pointer is pointing to a editor you have changed or even deleted. The number is not connected to a specific editor, only to the number in the list of editors. Choices : 0,1..x (x = last number of editor) Option : Viewer Description : Not used at this moment. Option : Packer Description : Default packer for this user. The following numbers can be used: 0 This means that there is no default packer defined. Concord will ask for a packer everytime the user wants to write a message. 1 Default packer is the first one defined in the packer list. 2 Default packer is the second packer defined in the packer list. 3 The third packer a.s.o. Please note that when you change packers the user might end up with a different default packer because the pointer is pointing to a packer you have changed or even deleted. The number is not connected to a specific packer, only to the number in the list of packers. Choices : 0,1..x (x = last number of packer) ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 64 Option : Charset Description : Default character set for this user. The following numbers can be used: 0 This means that there is no default character set defined. Concord will ask for a character set everytime the user wants to write a message. 1 Default character set is the first one defined in the character set list. 2 Default character set is the second character set defined in the character set list. 3 The third character set a.s.o. Please note that when you change character sets the user might end up with a different default character set because the pointer is pointing to a character set you have changed or even deleted. The number is not connected to a specific character set, only to the number in the list of character sets. Choices : 0,1..x (x = last number of character set) Option : Msg packet Description : Default type of offline mail system used. This is either QWK, BlueWave or Omen. The following numbers can be used: 0 This means that there is no default type selected. 1..3 The available type of packets. You cannot change, add or delete a type of mail system, since these are built into Concord. Choices : 0..3 Option : Msg area Description : This field contains two separate fields. The first is the number of the area the user has selected. The second field is the group name of that area. Example : 95 DAT Option : File area Description : This field contains two separate fields. The first is the number of the file area the user has selected. The second field is the group name of that area. Example : 134 CD1 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 65 Option : Door Description : This field contains two separate fields. The first is the number of the door the user has selected. The second field is the group name of that door. Example : 134 CD1 Option : Chat channel Description : Number of chatchannel the user has selected. This is used in the internal multinode chat. Example : 1 Option : Read msgs type Description : This is the type of display the user has selected for reading messages. These types are defined at the back of the language files. The following numbers can be used: 0 The first display type defined. 1 The second display type defined. If you define more types of display for reading messages, this number can increase. Example : 0 Option : File list type Description : The number of the file list type the user selected as his/her default file list type. These types are defined in the back of the language files. The following numbers can be used: 0 The first display type defined. 1 The second display type defined. 2 The third display type defined. If you define more types of display for listing files, this number can increase. Example : 0 Option : Sysop comment Description : A field in the user file where you, the Sysop, can place a remark about the user. Example : Loves Concord The following statistics are only for the current day: Option : Calls Description : Number of calls to your system the user made today. Example : 3 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 66 Option : Min elapsed Description : Number of minutes that the user has been using today. Example : 13 Option : DL KB Description : Number of kilobytes downloaded today by this user. Example : 123 Option : DL files Description : Number of files downloaded today by this user. Example : 3 Option : Last packet num Description : Number of packages downloaded with the offline mail system. When a user downloads another packet the same day, Concord will increase the file extension with one, so you won't receive a package with the same name twice. The first package is called *.QWK (* is replaced by the name you enter in the configuration program), the second will be *.QW1, the third *.QW2 and so on. Example : 1 Option : Sysop comment Description : Comment from the Sysop for this user. Example : Big downloader 2.8.3 User editor Screen 3 ----------------------------------------------------------------- The first part on this screen concerns the offline mail system. Option : Msg packet days Description : Currently not used by Concord. Option : Max msgs in packet Description : Maximum number of messages Concord will pack into one package for this user. By default this is the number specified in the configuration program, but you could change this for certain users. Example : 500 Option : Include WELCOME Description : Is the file WELCOME.ANS included in the offline mail package which the user will download or not. Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 67 Option : Include NEWS Description : Is the file NEWS.ANS included in the offline mail package which the user will download or not. Choices : Yes/No Option : Include GOODBYE Description : Is the file GOODBYE.ANS included in the offline mail package which the user will download or not. Choices : Yes/No Option : Include new files list Description : Is the file with a list of new files included in the offline mail package which the user will download or not. New files are scanned since the last time the user searched for new files. Choices : Yes/No Option : Include new bulletins Description : Are new bulletins included in the offline mail package which the user will download or not. New bulletins are scanned since the last time the user scanned for bulletins. Choices : Yes/No Option : Include last read ptrs Description : Is the file which contains the last read pointers included in the package that the user will download or not. Choices : Yes/No Option : Want to see ALL msgs Description : Does this user wants to see msgs for ALL as personal messages or not. Choices : Yes/No Option : Offline packing Description : Are messages packed offline during a system event everyday or are they only packed when the user is online. This option is currently not used by Concord. Choices : Yes/No Option : Mark mail as received Description : Is mail, that has been packed for the user in an offline mail package, marked as received or not. Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 68 Option : Not include own msgs Description : Are messages from the user himself, answers and new messages, since the last time the offline package system was used, included in the mail package or not. Choices : No/Yes Here are some more general options....... Option : First menu Description : Normally a user will start at the main menu called TOP.MNU. But sometimes you might want to redirect this user to a different menu, or you have a special Sysop menu where you want to jump to straight away, then you can use this option. If there is a menu name given in this field, Concord will jump to that menu, instead of the normal main menu. An extension is not needed since menu files always have MNU as extension. Example : SYSOP Option : Language Description : Name of the language file that is active for this user. No extension needed. Example : DEFAULT Option : Last file check Description : Date of the last new files scan by this user. The format is MM-DD-YY. Example : 10-30-94 Option : Last bulletin check Description : Date of the last bulletin check by this user. The format is MM-DD-YY. Example : 11-22-94 Option : Last msgs packet Description : Date of the last offline message packet generation for this user. The format is MM- DD-YY. Example : 12-23-94 Option : Expiration date Description : Date that the expiration for this user expires. When the user logs in to the system, a script file is run, allowing you to take certain actions. This field could be used for membership periods etc. Example : 07-18-97 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 69 Option : Time in bank Description : Number of minutes that this user has in the internal timebank. Example : 120 Option : DL-limit in bank Description : Number of kilobytes this user has in the internal timebank. Example : 1000 Option : View file Description : Name of the file that is to be shown to this user when he/she logs on to your system. Depending on the next options this is done once or always. This filename can have an extension. Example : MEMBER.RIP Option : Delete after view Description : Is the file mentioned in the previous option deleted after the user has viewed it or not. Choices : Yes/No Option : File viewed Description : This informs you if the file has been viewed or not by this user. Concord changes this field into Yes as soon as the file is viewed by this user. Choices : Yes/No Option : View only once Description : Is this file to be viewed by this user only once or more then one time. Choices : Yes/No 2.8.4 User editor Screen 4 ----------------------------------------------------------------- Some options for controlling Concord's behaviour..... Option : Mail check Description : Does this user has his/her mail check on or off. Choices : Yes/No Option : New files check Description : Does this user has his/her new file check on or off. Choices : Yes/No Option : New bulletins check Description : Does this user has his/her bulletin check on or off. Choices : Yes/No ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 70 Option : Colours Description : Is this user using colours or not. Choices : Yes/No Option : Hot keys Description : Is this user using hot keys or not. Choices : Yes/No Option : No DL ratio check Description : Is the ratio check performed on this user or not. Choices : Yes/No Option : No kill Description : Is the No-kill flag turned on or not. When this option is on, the user can not be deleted from the userlist, even if the Delete flag in screen 1 is on. Use this for example for your own record and that of your co-sysops. Choices : Yes/No Option : Calls since bday chk Description : Number of calls since last birthday check. Concord will ask for a birthday verification after the number of days configured in CFG is exceeded. Then this field is reset to 0. Example : 5 Option : Wrong passwords Description : Number of wrong passwords entered since last logon. This can be used as a safety feature to inform the user about any illegal attempts to access the system with his/her name. This counter is reset when a correct password is given. Example : 3 Select QUIT from the menu (F10) or press ESC to exit the user editor and return to the installation program. The installation program will inform you about the actions performed and if everything went ok or not. Press ENTER to continue. Displayed is a list of several things that you should check before starting Concord. That is all folks for the installation. Now play around with Concord and remember: "Using Concord is fun! Trust your computer! Don't give up!" | - Pasi Talliniemi ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 71 2.9 Environment variable ----------------------------------------------------------------- Make sure that you set the environment variable CONCORD in your batchfile or your AUTOEXEC.BAT file. This variable must point to your main BBS directory. In our example C:\CONCORD. Setting the variable is done by adding the following line to your batch or AUTOEXEC.BAT file: SET CONCORD=C:\CONCORD\ Concord needs this environment variable. It will not run without it. Consult your MS-Dos manual if you have trouble installing the variable. You can check if it is set by typing SET at your DOS prompt. This will give you a list of all settings and should include the line: CONCORD = C:\CONCORD If not, consult your DOS manual. 2.10 Conversion from SuperBBS ----------------------------------------------------------------- The development of Concord started when SuperBBS died, or at least when it was clear that there would not be an update for some time. So it might not come as a surprise that Concord has a conversion utility for SuperBBS systems. What to do to convert from SuperBBS v1.17-3 (or 1.18 Beta) to Concord? Well, the answer is not to much, since most things are done by the conversion program. What you need is a SuperBBS system version 1.17-3 (or the not officially released for the public 1.18 Beta-1). Make sure that the SBBS variable is pointing to the correct directory. Unpack the main Concord archive, not the archive that comes with the installation program, into a temporary directory on your harddisk and start the installation program. The first screen is the information screen, informing you about the requirements for Concord. Press ENTER to continue. Now you will see the settings screen. Press SPACE so you can adjust the settings. Change the prompt from creating new files into the convert from SuperBBS option. Check if the directory name is correct and then press ESC when done. Press ENTER to start the installation and conversion. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 72 Concord will ask if it is allowed to create the destination directory if it does not exist. Then it will inform you about the settings. If something is wrong, Concord will inform you. Press ENTER if everything is correct. The installation program will now install the Concord files, convert your SuperBBS control files, textfiles etc. to the new Concord format. You might see some remarks that certain codes are not supported by Concord, that is because not every control code within SuperBBS is supported in the same way in Concord. The installation program will also convert your userbase and other parts of the SuperBBS configuration to Concord formats. When everything is done, Concord will inform you that it is ready. Now there are some information screens about things to do, so read them and press ENTER to continue. In the end you will be back where you started from, the DOS prompt. | Please note that a menu conversion is not available at this | moment. There is however an utility to convert ANSI files from | SuperBBS into Concord format, but this is a separate utility and | is not included in the main Concord archive. 2.11 Checking the configuration. ----------------------------------------------------------------- Please check your configuration! Although the conversion can handle most SuperBBS systems, you might have a system where the conversion program had some difficulties. Start the main setup program and go through all the options. See for an explanation of all options the previous part of this chapter. This is what you have to do: - Check the main configuration. | - Move files into the correct directories. This is needed | because the installation program will place all files in | the main directory. You might have to move the menu files, | the ANSI screen files and, but only if you used 1.18 Beta | 1, the filebase files. - Check the area set up for mail and file areas. - Check if your userbase is converted correctly. - Adjust the default user settings to your likings. | - Create your menus. Test Concord and make adjustments where needed. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 73 | 2.12 Manual conversion | ----------------------------------------------------------------- | | If you want some more control over the conversion, it is also | possible to install Concord as a new system and then do the | conversion manually. This is done by the GENUTIL program. Run | GENUTIL CONVERT ? for more information on the options to convert | your SuperBBS configuration. | | 2.13 Conversion from other software | ----------------------------------------------------------------- | | More and more external utilities are coming available. Conversion | from Proboard and RemoteAccess to Concord is available, although | these are not full conversions. Please check the support sites | in you country. | | 2.2 Commandline options | ----------------------------------------------------------------- | | Concord has several commandline options which can change the | behaviour of the program. These are also used when you start the | BBS from a mailer in a batchfile and not directly. More then one | option can be used on the commandline. Most options can be | shortened to the first character. | | Option : -BPS:<Bps speed> | Shortcut : -B:<Bps speed> | Description : Modem speed of the connection that is | already there. This tells Concord that it is | already connected. | | Option : -DEBUG | Shortcut : -D | Description : Shows you the debug strings. When Concord is | running it will show you more information | than it does normally. This information can | be of use when you are having problems | running Concord. | | Option : -ERRLVL:<Errorlevel> | Shortcut : -E:<Errorlevel> | Description : Errorlevel to exit with after a normal exit | from Concord. This errorlevel will be used | unless a special action is performed that | has an other errorlevel, like writing mail, | which causes Concord to exit with another | fixed errorlevel. When this option is not | used, Concord exits with errorlevel 0. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 74 | Option : -LOCAL | Shortcut : -L | Description : This option allows you to enter the BBS | locally. Concord will not look for a | connection, but will be starting the BBS. | | Option : -M[<Filename>] | Shortcut : None | Description : Plays the musicfile that is given as the | filename in the background while running | Concord. A sound device must be present. | | Option : -MAINT | Shortcut : None | Description : This option allows Concord to prepare the | offline message creating for the QWK system. | Any user that is allowed to have messages | generated by Concord offline, will have | his/her message packet prepared. You only | need to run this option once a day and only | when you use offline mail packing. | | Option : -NODE:<Nodenumber> | Shortcut : -N:<Nodenumber> | Description : This option tells Concord which node number | it is running. This overrides the setting in | the configuration file. | | Option : -NOSYSOP | Shortcut : None | Description : All available Sysop keys will not be | available. Useful if you don't want anybody | use the keys on the local keyboard. | | Option : -OVRBUFSIZE:<Size in KB) | Shortcut : -O:<Size in KB) | Description : This sets the overlay buffer size to xx | Kilobytes. Using a larger buffersize will | speed up the BBS, but you will need to have | the memory to run it. | | Option : -PORT:<Port> | Shortcut : -P:<Port> | Description : COM port to use for the BBS system. This | overrides the setting in the configuration | file. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 75 | Option : -RETURN | Shortcut : -R | Description : Returns to the BBS after an exit. When using | this option, the user was already online, | but used an external program and now wants | to return to the BBS. Concord will not ask | for the username, it will only read in the | exitfiles and start the BBS at the same | place the external program was started. | | Option : -STATUSLINE:<Number> | Shortcut : -S:<Number> | Description : Tells Concord to start with a certain | statusline, the two lines at the bottom. | Using 0 will hide the statusline. | | Option : -TIME:<Time in minutes> | Shortcut : -T:<Time in minutes> | Description : This option tells Concord how much time it | is in minutes until the next system event. | This setting overrides the event settings in | the configuration file. | | Option : -USER:<Name>;<Password> | Shortcut : -U:<Name>;<Password> | Description : When using this option it is possible to | start the BBS without entering your name and | password. Very useful for local logins. | | Option : -WAIT | Shortcut : None | Description : Concord will wait for a file called | CRUNNODE.<Nodenumber>. This file is created | by the mailer. This is useful when running | with a multitasker. This allows you to keep | the BBS running in it's DOS VDM and when | Concord sees the drop file, it will start. | This speeds up starting the BBS after the | escape pressing in the mailer. | | Option : -* | Shortcut : None | Description : This tells Concord not to load the overlay | buffer into EMS memory. | | Option : /? | Shortcut : None | Description : Displays the commandline options. This | command can only be used as a single | commandline option. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 2 - Page 76 Chapter 3 - Language files ================================================================= 3.1 General information ----------------------------------------------------------------- Concord is flexible. That's what you should have found out by now. This flexibility is also visible in the language part of the program. Everything can be changed. From the lines of text displayed to the users up to the colours used to display them. Concord even allows you to define your own file list and message list types. You can have as many languages as you want. Just edit or create the language file, compile it and add it to the control list. How is this done and what every line in the language file means is explained in this chapter. 3.2 Control codes ----------------------------------------------------------------- There are several control codes available which you can use to control Concord's behaviour. You can use these control codes in the language files to perform certain actions. Please note that these control codes are entered as they appear. For example ^A; is entered as '^', 'A' and ';' and not by pressing the Ctrl key and the A key simultaneously. The ';' behind the macros is mandatory! This tells Concord that the macro command is finished. Options within square brackets [...] are optional. Macro : ^A; Description : Wait for Enter. Macro : ^B; Description : Backspace. Macro : ^C<fore>[,<back>]; Description : Change colour to the colours specified in the <fore> and (optional) <back> values. The <fore> stands for the foreground colour, the <back> stands for the background colour. You can use this option with a foreground colour value only, or specify fore- and background colours. The values for the colours are as follows: 00 Black 01 Blue 02 Green 03 Cyan 04 Red 05 Purple 06 Brown 07 Grey >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 1 08 Dark grey 09 Light blue 10 Light green 11 Light cyan 12 Light red 13 Light purple 14 Yellow 15 White Only the colours 0 to 7 are available as background colours. You can also use the colours 16 to 31 for the same colours as above, except that they are blinking. You don't have to enter the 0 in front of the numbers. For example, brown is colour 6. Macro : ^CN[,N]; Description : Return colours back to original colour. This macro allows you to change back to the colours used before the last colour change. The 'N' is not a number but the character 'N'. Macro : ^E1; Description : Clear screen. Macro : ^E2; Description : Clear line. Macro : ^E3; Description : Clear till end of line from cursor position. Macro : ^G<x>,<y>; Description : Go to position x,y. This is a physical screen position. The <x> stands for the horizontal position and the <y> stands for the vertical position. The top left corner of your screen is the 0,0 position. The top right corner of your screen would be position 80,0. Macro : ^L<length>; Description : Length of the answer field. This macro allows you to specify the length of the field that is available to be edited by a user. In general you would change the colours and then define the field length. This allows you to create answer boxes on screen. Two options are available here: ^L<length>,CAPIT; This tells Concord to capitalise the field input. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 2 ^L<length>,HIDDEN; This tells Concord not to show what is being typed in the edit field, but replace all characters with stars. For example when asking for the password. Macro : ^M; Description : Line feed. Macro : ^P[<length>]; Description : Wait <length> * 0.1 seconds. If no length is defined, the default of 0.5 seconds is used. This option allows you to pause a textline. Macro : ^S<drive:\path\filename.ext>; Description : Show ANSI file. You could use this option to display a file instead of a textline, for example as a time limit warning. Macro : ^^; Description : Use this if you need to enter a '^' character. | Macro : ^1<char>,^2<char> .... ^Z<char>; Description : Selection option. The <char> parameter is | replaced by a character. This allows you to make a selection. In most cases there is a line in the language file following the line with the selections, which is defining the actions to take. (See language file explanation for more information.) Macro : ^W; Description : Wait for the selection from the previous macro. Concord will supply the number corresponding to the character the user pressed. If you defined ^1Y^2N^3C^4S^5Q; in the previous macro and the user pressed C, Concord will supply the 3 for the action to perform. Macro : ^X<x>; Description : Moves the cursor <x> positions horizontally. Macro : ^Y<y>; Description : Moves the cursor <y> positions vertically. | Macro : ^]Statement; | Description : Macro to allow some parts of the textline to | be displayed only when the statement is | true. Any following ^] macro will cancel the | previous statement. See line 164 of the | language file for an example. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 3 If you don't understand some of these macros, you can have a look at the examples supplied in the language file, which will make it easier to understand. 3.3 The language control file ----------------------------------------------------------------- The control file, called LNG.CTL, is the place where you specify the languages you have available on your system. As with everything in Concord, you can have as many as you want. The control file is a plain ASCII file with the following format: Language_name Language description Language_name Language description Language_name Language description The language name is the name of the language file. Supplied with Concord is at least a file called DEFAULT.LNG. (More languages should/will be available.) This is a DOS filename without extension and should conform to the DOS filename conventions. The language description is what is shown to the user. Here's an example file: DEFAULT English (Normal) ENGWRD English (Weird language) SUOMI Finnish HOLLAND Dutch This file should be in your main Concord directory. | Please note that there is no reason why your language file should | be called DEFAULT.LNG. You can change it into anything you want, | just don't forget to change the name in the LNG.CTL file and in | your user editor for the DEFAULT USER. Here's a tip on designing your own language files. First copy the DEFAULT.LNG file to the filename you want to call your language file. Start the CFG program and choose editing language files. Then select your new language, edit the file and voila, a new language file is born. Remember to keep a backup of DEFAULT.LNG for safety, even if you don't use the file yourself, because you don't have to. Add the new language file to the control file and voila, your users can use the language. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 4 3.4 The Default language file ----------------------------------------------------------------- Here we go with the main part of the languages, the language file itself. This chapter will discuss every line in the DEFAULT.LNG language file. In some of the lines are some macros used, which are replaced by Concord with information about the system, user or area the user is in. Please see chapter 5 for more information about these macros. Keys used in the language file editor: Space Used for showing how the line will look in the BBS. All control codes will be used. F1 Help screen F8 Msg read options F9 File list options F10 Info in the *.INF file belonging to the language file. (See 3.5) ^C Enter the default line A..Z Find word in language In this documentation the following format is used: Line 1 The textline as it is in the default.lng file Line 2 The description of the textline, including a description of some commands used in the line Note that line 1 is only the default text, you can use whatever language you want in your own language file. Appendix A will give you a list of all file strings used by Concord. Because of the length of some of the lines, they might not fit on the lines of these pages, the following convention is used to make clear that it is actually one line: Line 001 : This is an example of a line which -> will not fit on one line of -> this manual. The -> should not be typed when you enter a line in the language file editor. It is only there to tell you that the next line should be behind the previous one. Please note that if there is a space between the last character on the line and the -> symbol, there should be a space in the actual line. The used macros in the language files, words starting and ending with @, like @macro@, are explained in another chapter. Please refer to that part of the documentation if you have any questions about them. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 5 Here are the textlines: Line 001 : ^C15,0;Please identify yourself, -> stranger:^M;^C14,1;^L35,CAPITFIRST;-> ^M;^M; Description : Line shown to the users when they have to enter their name at logon. The colour is set to 15,0 which is white on black and the line 'Please identify yourself, stranger:' is displayed. Then there is a line feed and the colour is changed to yellow on blue. In this colour is the input field placed on screen with a length of 35 characters. The first character of each word is capitalised. When the user entered his/her name and pressed ENTER, the two last line feeds are entered. These two were behind the ^L character, which means they are executed after the ^L option is executed. (See 3.2 for information about the control codes.) Line 002 : ^C13,0;Let me see. At least you seem to -> be in our files.^M;So you are @NAME@ -> from @CITY@, right? (~1Y/~2n) ^W;^M;^M; Description : Line shown to the user after he/she entered her/his name to verify if he/she is really from the city which is in the userfile. (Because there might be somebody else with the same name as your user.) The colour is set to purple on black and the text is displayed on two lines, because of the ^M (line feed) in the textline. The two macros @NAME@ and @CITY@ are replaced by Concord with the user's name and city. See chapter 5 for more information on these macros. At the end of the line a '(Y/n)' is displayed (without the ') and Concord is waiting for the user. In this case the first option is hardcoded into Concord as being the 'Yes' and the second option is the 'No'. The capital is the default value, so when the user presses ENTER, Concord makes it a Y, or whatever you make of it in your own language. The ^W means 'wait for the selection' and after the user made a selection, Concord adds two linefeed. Line 003 : ^C15,0:Show me your pass and I might -> let you go.^M;^C14,1;^L15,HIDDEN;^M;^M; Description : Line shown to the user when Concord is asking for the password. The ^L15,HIDDEN; is responsible for hiding the password when the user is entering it. All characters are replaced by the '*' character. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 6 Line 004 : ^C13,0;Very well. Have a nice day.^M: Description : Textline shown to the user when the password was correct and the user is allowed to enter the BBS system. Line 005 : ^C13,0;Almost but not quite. You know, -> I - as a representative of the military-> ^M;police - could put you in front of -> the execution squad because of this,^M;-> but today feels like my lucky day, so -> I give you another try. Don't blow it-> ...^M;^M; Description : This line is shown to the user when he/she entered a wrong password. It is a good example of how to make long lines. Eventhough it is only a single line in the language file, is shown on screen as several lines, because of the ^M; usage. (Remember ^M; represents a line feed.) You can use this in fact on every line which you want to display to the user if you can't get the information you want to give on one single line. Line 006 : ^C13,0;hahaha. GUARDS! Take this man -> to the hot spot and show him what a -> nice^M;fellows we are. Any last wish? -> (~1Y/~2n) ^W;^M; Description : This line is shown to the user when all password attempts have failed. The user will be logged off after he/she answered the 'Last wish' question. The Y/n is hardcoded, but not really used, because whatever the user answers, he/she is logged off. Line 007 : ^C13,0;Pardon me... You said your name -> was @NAME@, right? (~1Y/~2n) ^W;^M;Yeah -> I knew it!^M;^M; Description : Shown to the user when the entered name is not found in the userlist. Concord will first display the line up to the (Y/n) part, then wait for the user. When an answer is given to the question, Concord will display the rest of the line on a new line. The @NAME@ macro is replaced by the name entered by the user. The Y/n order is hardcoded into Concord. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 7 Line 008 : ^15,0;^E1;Checking for new mail... -> (Ctrl-C to abort or Ctrl-N to jump -> to next area.)^M;^M; Description : This line is shown when the user is scanning for new mail (when run from the menu or from the WELCOME.Q-A questionnaire). The ^E1; means a clear screen. The Ctrl-C and Ctrl-N combinations are hardcoded into Concord. Line 009 : ^C11,0;@MAREA_GROUP@.03 -> @MAREA_NAME@^E3;^X-80;^C14,0; Description : This line is used by Concord to show the mail areas it is scanning for new mail. The colour is changed and then the Group name and area name as defined in the message area section of the configuration program is displayed for every selected area.The ^E3; clears the line to the end. Then with the ^X-80; code, the cursor is moved back 80 positions, to the beginning of the line, the colour is changed again and if there is another area to scan, Concord restarts at the beginning of the line. The @MAREA_GROUP@ and @MAREA_NAME@ are replaced by Concord with the group name and area name. The .03 behind the @MAREA_GROUP@ tells Concord to fill out up to 3 spaces when displaying the group name. This means that eventhough you might not have three character groupnames, Concord will add spaces to make it three characters long. If you don't want the lines to be overwritten, you should take out the control code ^X-80;. This will place every area on a new line, because the cursor is not moved back. If there is mail, Concord will jump to text line 010. When done, Concord will continue with line 009 if there are more areas to scan. If not, Concord will jump to textline 012. If there is no mail found after all areas are scanned, textline 011 is displayed. Line 010 : ^C14,0;@MSG_RCVD@:01 @MSG_FROM@.25 -> @MSG_SUBJ@.40 @MSG_DATE@^M; Description : Textline to inform the user that there is a new message found. It displays the information that the message is received, the senders name, the message subject and the date the message was written. The :01 behind the @MSG_RCVD@ macro tells Concord only to use 1 character position. The .25 behind the @MSG_FROM@ macro tells Concord to extend the macro until it is 25 characters >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 8 long. If the text to display is shorter, Concord will use spaces to fill out the rest. With this in mind we can tell that the @MSG_SUBJ@ macro is going to be 40 characters long. If the information is longer then 40 characters, Concord will not display more then 40 characters (or 25 for the senders name in this example). Line 011 : ^C12,0;^M;Sorry, no new mail found. -> Press ENTER to continue.^M;^A; Description : Shown to the user when no personal new mail was found after doing a mail scan. Line 012 : ^C15,0;^M;Do you want to read your -> mail now? (~1Y/~2n) ^W;^M; Description : Line shown to the user when there was new mail for the user and Concord asks him/her if he/she wants to read it now. The First option ~1 means Yes, the second ~2 means no. The characters 'Y' and 'n' can be replaced by the characters in your own language. Line 013 : Yeah! Description : Textline meaning 'Yes'. This is used by Concord everytime there should be a positive answer to a question or option. Line 014 : Nah... Description : Textline defining the response when Concord needs to display a 'No'. Line 015 : Male Description : Textline to define the word for a male person. Line 016 : Female Description : Textline to define the word for a female person. Line 017 : ^C15,0;No messages found. Press ENTER -> to continue.^A;^M; Description : Line shown to the user when there are no messages in the current area and the user selected a command to read or scan for messages. Line 018 : ^X-79;^C14,1;@FAREA_NUM@:05 @FAREA_GR-> OUP.03 @FAREA_NAME@^E3;^C15,0; Description : Shown to the user when he/she does a new files scan, searches for files or descriptions. This line is the line that displays the area number, the area group and the area name. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 9 Line 019 : ^X-79;^C15,0;^E3; Description : Clears the current line. The ^X-79 moves the cursor to the beginning of the line, the colour is then set to white on black and the line is cleared. This is used for example when scanning for new messages when a line needs to be cleared. Line 020 : ^C15,0;^M;No files found.^E3;^M; Description : Shown to the user when there are no files found in either the new files list, files list and the search for files and keywords. Line 021 : ^C12,0;Viewing file @FILE_NAME_EXT@ -> dated on @FILE_DATE_SMALL@^M; Description : Shown when viewing a file as the top line, telling you which file you are viewing. This can be a text file or an archived file. Line 022 : ^C14,0;@VIEW_FILENAME@.12 ^C7,0;-> @VIEW_COMPMETHOD@.15 ^C11,0;-> @VIEW_ORIGSIZE@:07 ^C9,0;-> @VIEW_COMPSIZE@;07 ^C10,0;-> @VIEW_FILEDATE@^M; Description : This line is used when Concord displays the information about the file you are viewing, when the file you want to view is a compressed file. Concord uses this line for every file included in the archive. It shows the filename, compression method, original file size, compressed file size and the date of the file inside the archive. Line 023 : ^C7,0;%1 ^C15,0;%2 ^C14,0;%3^M; Description : This is the list format when viewing files in binary mode. %1 is the file position, %2 is the HEX listing and %3 is the ASCII listing. Line 024 : ^C15,0;Search files by keyword (/ALL-> =all areas, /COMB=comb. areas, none=-> curr. area) :^M;^C14,1;^L79;^C15,0;^M; Description : Line shown to the user when he/she is using the keyword file search option. Line 025 : ^C15,0;Search files by filemask (/ALL-> =all areas, /COMB=comb. areas, none=-> curr. area) :^M;^C14,1;^L79;^C15,0;^M; Description : Line shown to the user when he/she is using the filemask file search option. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 10 Line 026 : ^C15,0;Search new files by date -> (@CURRDATEFMT@) : ^C14,1;^L8;^C15,0;^M; Description : This line is used when a new files scan is about to be performed and the user has to enter the date as of which the file scan is to start. Line 027 : ^C12,1; String not found! Press ENTER.-> ^E3;^A; Description : Shown to the user when a search was done in the area select screens, files and messages, and the string entered was not found. Line 028 : 02,Y,Y,Y;^C14,0;@FAREA_NUM@:5@FAREA_-> COMB@:01 @FAREA_GROUP@.03 @FAREA_-> NAME@.25 ^M; Description : This line is replaced by Concord with the file area names in the file area select screen. Here is an explanation of the first four characters: 1st: Number of columns in the arealist 2nd: Force draw of all lines in list. This can be Y(es) or N(o). 3rd: Jump directly to wanted position. This can be Y(es) or N(o). 4th: Line can be cleared with 'Clreol' command. Clreol is clear end of line. This can be Y(es) or N(o). Line 029 : 01,37,014,112;^C14,0;@FAREA_NUM@:5-> @FAREA_COMB@:01 @FAREA_GROUP@.03 -> @FAREA_NAME@.25 Description : This line is used to display the current file area in the file area selection list. here is an explanation of the first four characters: 1st: Cursor X position 2nd: Cursor length 3rd: Cursor off colour 4th: Cursor on colour When displaying the area list, line 28 is used to display all areas that are available to the user (Cursor OFF), and line 29 is used to display the area that is currently selected by showing an inverse line. (Cursor ON) ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 11 Line 030 : 013,032,081,063,067,084 Description : These are the key codes generated by the keyboard for the various functions in the file area selection screen. If you want to use different keys for the options, this is where you change them. A list of scan codes can be found in your printer or MS-Dos manual. Appendix B lists the scan codes for the keys that are normally not listed in your printer or MS-Dos manual. The keys are listed in the order they are in, the default is entered in brackets: - 1st field (013) This field selects the area. By default it is the RETURN key. Key code 013. - 2nd field (032) This field executes the question for searching for a string. By default this is the SPACE. Key code 032. - 3rd field (081) This field quits the area selection and returns you to the area you were in when you selected the file area selection option. By default the Q key. Key code 081. - 4th field (063) This field brings up the help screen. By default this is the ? key. Key code 063. The helpfile is called SELFAREA.ANS and should be in your textfile directory or the main Concord directory. - 5th field (067) This field selects if this field is a combined area or not. Combined areas are marked with an asterisk behind the file area number. By default this is the C key. Key code 067. You can switch combined areas on or off in the file area configuration. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 12 - 6th field (084) This field allows you to set the command character for setting more then one combined area at the same time. This command will display the question 'Set combined areas :'. By default this is the T key. key code 084. Some of these codes are not by default displayed on the line at the bottom of the | screen, textline 034. If you do want to | display the commands on the textline, edit | line 034. Line 031 : 04;^C13,1; Enter search string : ^E3;^L20; Description : Question shown to the user when he/she wants to search for a string in the file area select screen. Line 032 : 04;^C13,1; Enter area number : ^E3;^L5; Description : Line shown to the user when he/she enters a number of an area to jump to in the file area select screen. Line 033 : ^G1,1^C15,1; NUM GROUP NAME -> ^C15,1; ^C15,1 NUM GROUP -> NAME^E3;^C15,0;^M;^E3;^M; Description : This is the white text and blue bar on top of the file area selection screen. Line 034 : ^C15,0;^E3;^M;^C15,1; ENTER/num: Select -> area, SPACE: Find, C: Combined or Q: -> Cancel.^E3; Description : Line shown at the bottom of the file area selection screen, telling the user which options are available. Line 035 : ^C13,0;^E3;^M; Enter new area number : -> ^E3;^L5; Description : Fast mode selecting of the areanumber to jump to or shown when FILEAREA.ANS is found and displayed. Line 036 : 02,Y,Y,Y;^C14,0;@MAREA_NUM@:5@MAREA_-> COMB@:01@MAREA_SCAN@:01@FAREA_GROUP@-> .03 @FAREA_NAME@.25 ^M; Description : This line is replaced by Concord with the message area names in the message area select screen. (Like line 28 for the file areas.) A definition of the codes 02,Y,Y,Y is given in line 29. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 13 Line 037 : 01,37,014,112;^C14,0;@MAREA_NUM@:5-> @MAREA_COMB@:01@MAREA_SCAN@:01-> @MAREA_GROUP@.03 @MAREA_NAME@.25 Description : This line is the inverse line in the message area selection screen. (Like line 29 for the file areas.) A definition of the codes 01,37,014,112 is given in line 29. Line 038 : 013,032,081,063,067,077,084 Description : These are the key codes generated by the keyboard for the various functions in the message area selection screen. If you want to use different keys for the options, this is where you change them. You can find the key codes in your printer manual, most DOS manuals and the special ones are listed in the appendix of this manual. This is the order they are in, the default is entered in brackets: - 1st field (013) This field selects the area. By default it is the RETURN key. Key code 013. - 2nd field (032) This field executes the question for searching for a string. By default this is the SPACE. Key code 032. - 3rd field (081) This field quits the area selection and returns you to the area you were in when you selected the message area selection option. By default the Q key. Key code 081. - 4th field (063) This field brings up the help screen. By default this is the ? key. Key code 063. The helpfile is called SELMAREA.ANS and should be in your textfile directory or the main Concord directory. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 14 - 5th field (067) This field selects if this field is a combined area or not. Combined areas are marked with an asterisk behind the message area number. By default this is the C key. Key code 067. You can switch combined areas on or off in the message area configuration. - 6th field (077) This field marks the areas for the mailscan. This is shown in the area selection list by an asterisk in front of the group. In the mail area selection lists there are two possible asterisk visible, one for the combined setting and one for the mailscan. By default this is the M key. Key code 077. - 7th field (084) This field allows you to set the command character for setting more then one combined area at the same time. This command will display the question 'Set combined areas :'. By default this is the T key. key code 084. Some of these codes are not by default displayed on the line at the bottom of the screen, textline 042. Line 039 : 04;^C13,1; Enter search string : ^E3;^L20; Description : Question shown to the user when he/she wants to search for a string in the message area select screen. Line 040 : 04;^C13,1; Enter area number : ^E3;^L5; Description : Line shown to the user when he/she enters a number of an area to jump to in the message area select screen. Line 041 : ^G1,1^C15,1; NUM GROUP NAME -> ^C15,1; ^C15,1 NUM GROUP -> NAME^E3;^C15,0;^M;^E3;^M; Description : This is the white text and blue bar on top of the message area selection screen. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 15 Line 042 : ^C15,0;^E3;^M;^C15,1; ENTER/num: Select -> area, SPACE: Find, C: Combined, M: -> Mailscan or Q: Cancel.^E3; Description : Line shown at the bottom of the message area selection screen, telling the user which options are available. Line 043 : ^C13,0;^E3;^M; Enter new area number : -> ^E3;^L5; Description : Message area selection prompt for selecting a message area when MESSAREA.ANS is found or when selecting an area in 'fast' mode. Line 044 : ^C14,0;Press ^C15,1; ENTER ^C14,0; -> to continue.^E3;^A;^X-40;^E3; Description : Shown to the user when he/she has to press ENTER. Line 045 : ^C15,0;Which file(s) to view (wildcards -> allowed) : ^C14,1;^L15;^C15,0;^M; Description : Shown to the user when he/she selected the view file menu option and Concord wants to know which file(s) to view. Line 046 : ^C15,0;^E1; Description : This is the file list header. It is always displayed before listing files. By default it only clears the screen. Line 047 : ^C14,1; (D) Down (U) Up (S) Stop -> (C) Continuous (A) Again (F) Flag -> (V) View^E3;^X-65; Description : This is the line which is displayed at the bottom of the screen while doing a file listing. The keys itself are defined in textline 048. Line 048 : 068,085,083,067,065,336,328,032,-> 070,086,069,060,062,339 Description : These are the key codes generated by the keyboard for the various functions in the file listing screen. If you want to use different keys for the options, this is where you change them. See appendix B for a list of the more exotic scan codes. The keys are listed in the order they are in, the default scan code is entered in brackets: - 1st field (068) This is the field for the key that means down. This will display the next screen in the filelisting. By default this is the D key. Key code 068. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 16 - 2nd field (085) This is the field for the key that means up. This will display the previous page of the filelisting. By default this is the U key. Key code 085. - 3rd field (083) This is the field for the key that means stop. This will abort the listing and return you to the menu you came from. By default this is the S key. Key code 083. - 4th field (067) This is the field for the key that means continuous. This will list the files in the filelist without stopping. By default this is the C key. Key code 067. - 5th field (065) This is the field for the again key. This means that Concord will display the same page of the file listing again. By default this is the A key. Key code 065. - 6th field (336) This is the field for the page down command. By default this is the PgDn key. Key code 336. - 7th field (328) This is the field for the page up command. By default this is the PgUp key. Key code 328. - 8th field (032) This is the field that also acts as the file tagging key. Field 9 can also be used for this. By default this is the spacebar. Key code 032. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 17 - 9th field (070) This is the second field for defining a file tag key. This is by default the F key. Key code 070. - 10th field (086) This field is for defining the key that makes Concord view a file while in the file list. By default this is the V key. Key code 086. - 11th field (069) This field defines the key that let's you edit the filedescription of the file which is highlighted. By default this is the E key. Key code 069. - 12th field (060) This field defines the key that makes Concord jump to the previous page of the file listing (if there is any). By default this is the < key. Key code 060. - 13th field (062) This field defines the key that makes Concord jump to the next page of the file listing (if there is any). By default this is the > key. Key code 062. - 14th field (339) This field defines the key for the delete command. This allows you to delete a file from the file list. This option is only available to users with Sysop level. By default this is the DEL key. Key code 339. Please note that some of these keys are not mentioned in the line displayed to the users. (Line 047) But you can edit that line, so you can incorporate everything you want, as long as you stay within 80 characters. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 18 Line 049 : ^C12,0;Not enough time (@TIME_LEFT@ -> min) or download limit (@LIMIT_LEFT@k) -> left to download^M;all tagged files.^M;-> ^C15,0;Press Enter.^A;^M; Description : Textline shown to the user when the user has not enough time or kilobytes left to download all the files the user tagged. Line 050 : ^C12,0;Not enough ratio to download all -> tagged files. You should upload first.-> ^M;^C15,0;Press Enter.^A;^M; Description : Text shown to the user when he/she has not the correct upload/download ratio to download the files he/she wants. Line 051 : ^C14,1;@FAREA_NUM@:05 @FAREA_GROUP@-> .03 @FAREA_NAME@.25^E3;^C14,0;^M; Description : The blue bar with white text displaying the area name, group and number when searching for files. Line 052 : ^C15,0;More? (~1Yes/~2No/~3Cont/~4Back-> ~6/~5Line) ^W;^X-40;^E3;^CN,N; Description : Textline shown by Concord when the user is viewing a file or text and Concord has reached the end of the screen and wants to know what to do next. The responses are hardcoded into Concord. However the key that follows the code is the character that needs to be pressed to activate the option. Pressing N in the above textline will result in a No option in Concord. Here are the options for this line: ~1 - means Yes ~2 - means No ~3 - means Continuous ~4 - means previous page ~5 - means show next line ~6 - is not used Line 053 : 02,Y,Y,Y;^C14,0;@DOOR_NUM@:05 @DOOR_-> GROUP@.03 @DOOR_NAME@.25 ^M; Description : This line is the textline that displays the available doors in the door selection screen. (Like line 28 for the file areas.) A definition of the codes 02,Y,Y,Y is given at line 28. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 19 Line 054 : 01,37,014,112;^C14,0;@DOOR_NUM@:05 -> @DOOR_GROUP@.03 @DOOR_NAME@.25 Description : This line is the inverse line in the door selection screen. (Like line 29 for the file areas.) A definition of the codes 01,37,014,112 is given at line 29. Line 055 : 013,032,081,063,067 Description : These are the key codes generated by the keyboard for the various functions in the doors selection screen. If you want to use different keys for the options, this is where you change them. This is the order they are in, the default is entered in brackets: - 1st field (013) This field selects the door. By default it is the RETURN key. Key code 013. - 2nd field (032) This field executes the question for searching for a string. By default this is the SPACE. Key code 032. - 3rd field (081) This field quits the door selection and returns you to the menu you were in when you selected the door selection option. By default the Q key. Key code 081. - 4th field (063) This field brings up the help screen. By default this is the ? key. Key code 063. The helpfile is called SELDAREA.ANS and should be in your textfile directory or the main Concord directory. - 5th field (067) This field selects if this field is a combined door or not. Combined doors are marked with an asterisk behind the door number. By default this is the C key. Key code 067. You can switch combined doors on or off in the doors configuration. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 20 Line 056 : 04;^C13,1; Enter search string : ^E3;^L20; Description : Question shown to the user when he/she wants to search for a string in the door select screen. Line 057 : 04;^C13,1; Enter door number : ^E3;^L5; Description : Line shown to the user when he/she enters a number of a door to jump to in the door select screen. Line 058 : ^G1,1^C15,1; NUM GROUP NAME -> ^C15,1; ^C15,1 NUM GROUP -> NAME^E3;^C15,0;^M;^E3;^M; Description : This is the white text and blue bar on top of the door selection screen. Line 059 : ^C15,0;^E3;^M;^C15,1; ENTER/num: Select -> door, SPACE: Find or Q: Cancel.^E3; Description : Line shown at the bottom of the door selection screen, telling the user which options are available. Line 060 : ^C13,0;^E3;^M; Enter new door number : -> ^E3;^L5; Description : Prompt displayed by Concord when the user selects a door in 'Fast' mode or when the file DOORAREA.ANS is found. Line 061 : ^C15,0; Enter files to flag : ^C14,1;-> ^L12;^C15,0;^M; Description : Used by the tagfile menutype. This is currently not used by Concord. Line 062 : ^C13,1; Enter files to view : ^E3;-> ^L12;^X-40; Description : Shown to the user at the bottom of the screen when he/she selected the file view option in the file list. Line 063 : ^C13,1; Enter files to flag : ^C14,1;-> ^L12;^M; Description : Shown to the user at the bottom line of the screen, when he/she pressed the key that means tag a file in the filelist. This line is not shown to the user when he/she uses the spacebar to tag a file. The file that is currently highlighted will be the default choice and placed behind the question. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 21 Line 064 : ^C14,1; No files found! Press ENTER -> to continue. ^E3;^A;^X-45; Description : Shown to the user when there was no file found that matched the entered information at the questions in line 062 and line 063. This line is displayed in the bottom line of the file listing. Line 065 : ^C15,0;Enter reason to yell Sysop : -> ^C14,1;^L40;^C15,0;^M; Description : Shown to the user when he/she wants to page the sysop for a chat and Concord asks for the reason. Line 066 : ^C13,0;Yelling Sysop for ^C15;%1^C13; -> seconds. Press (^C14;~1S^C13;) to -> abort.^W;^X-60;^E3;^N; Description : Line shown to the user when Concord is yelling the Sysop. The %1 is replaced by the number of seconds Concord will yell. The ~1 character will abort the yell. Line 067 : ^C15,0;Enter filename to unpack to -> temp directory ; ^C14,1;^L12;^C15,0;^M; Description : Shown when Concord wants to know which file to unpack to the temporary directory. Line 068 : ^C15,0;Which file to unpack? (Wildcards -> valid, Enter when ready, /? to view)-> ^M;^C14,1;^L79;^C15,0;^M; Description : Shown to the user when Concord wants to know which file to unpack from the file in the temporary directory. Line 069 : ^C15,0;Enter filename to copy to -> temp directory : ^C14,1;^L12;^C15,0;^M; Description : Concord displays this line when the user selects to copy a file to the temporary directory. Line 070 : ^C15,0;Enter filename to pack files in -> temp directory : ^C14,1;^L8;^C15,0;^M; Description : Textline displayed when Concord wants to know to which file to pack the files in the temporary directory. Line 071 : ^C15,0;Which files to pack? (Wildcards -> valid, Enter when ready)^M;^C14,1;^L79;-> ^C15,0:^M; Description : Line of text shown to the user when Concord asks for the file to be packed inside the new archive from line 070. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 22 Line 072 : ^C15,0;Enter filename(s) to erase in -> temp directory ; ^C14,1;^l12;^C15,0;^M; Description : Concord shows this line when it needs to know which files to delete from the temporary directory. Line 073 : ^C15,0;List files in temp directory -> (Wildcards valid) : ^C14,1;^L12;-> ^C15,0;^M; Description : This line is shown by Concord when the user uses the list command for the temporary directory. Line 074 : ^C15,0;View file in temp directory : -> ^C14,1;^L12;^C15,0;^M; Description : When the user wants to view a file in the temporary directory, this textline is shown by Concord to ask for the filename. Line 075 : ^C15,0;%1.12 ^C14,0;%2:08 ^C12,0;%3 %4^M; Description : Line used to display the filelist in the temporary directory. The %1 is replaced by the filename, the %2 is the filesize, %3 the date of the file and %4 the time. Line 076 : ^C13,0;Total of %1 files (%2 bytes). -> Free disk space %5 bytes.^M; Description : Textline shown at the bottom of the temporary directory file list, informing you about the amount of files and diskspace used. %1 is the number of files, %2 the total size of these files and %5 the amount of free diskspace. Line 077 : DIR Description : Used by Concord when listing a DOS directory to indicate that it is a directory. Line 078 : <empty> Description : String shown to the user when the Sysop has configured 'No Yell device' in the configuration part of the program, so that the user knows that no music is played at the Sysop side. Line 079 : ^M;^C13,0;System operator is here...^M; Description : Textline shown to the user at the beginning of a chat with the Sysop. Line 080 : ^M;^C13,0;System operator was here...^M; Description : Textline shown to the user at the end of a chat with the Sysop. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 23 Line 081 : ^C12,0;20 seconds until inactivity -> hangup!^M; Description : Shown to the user 20 seconds before Concord will disconnect because there was no response from the remote keyboard. You can set this time in the main configuration part of the program. Line 082 : ^C12,0;User inactive - so long...^M; Description : Shown to the user at the moment Concord disconnects because there was no activity from the user. Line 083 : ^C12,0;less then 2 minutes left!^M; Description : Concord shows this line to the user when he/she has 2 minutes time left for the call. Line 084 : ^C12,0;^M;^M;Time limit exceeded - see -> you tomorrow!^M; Description : Textline shown to the user when Concord disconnects, because the user has no time left for the day. Line 085 : ^C15,0;Enter filename(s) to move : -> ^C14,1;^L12;^C15,0;^M; Description : Shown by Concord when it needs to know which file(s) to move. Line 086 : ^M;^C13,0;Password required : ^C14,1;-> ^L15,HIDDEN;^C15,0;^M; Description : When a user or you wants to enter somewhere and there is a password set, this line will appear to ask for the password. The HIDDEN means that Concord will replace the characters typed by asterisk. Line 087 : ^C12,0;Password failure!^M; Description : Textline showing that the entered password was not correct. Line 088 : ^C15,0;Ok.^M; Description : Textline showing the fact that the password was correctly entered. Line 089 : 01,Y,Y,Y;^C14,0;@MSG_NUM@:05 -> @MSG_PRIV@:01 @MSG_FROM@.15 -> @MSG_TO@.15 @MSG_SUBJ@.23 -> @MSG_RCVD@:01 @MSG_DATE@:09^E3;^M; Description : This line is the line used to display the messages in the list messages command. Concord will use this line to display all messages available in the area. (Like line 28 in the file selection screen.) The codes 01,Y,Y,Y are explained in line 28. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 24 Line 090 : 01,79,014,112:MSG_NUM@:05 Description : Used by Concord as the inverse line in the quickscan message selection screen. (Same function as line 29 for the file area selection.) The codes 01,79,014,112 are explained in line 29. Line 081 : 013,032,081,063,077 Description : These are the key codes generated by the keyboard for the various functions in the message list screen. If you want to use different keys for the options, this is where you change them. You can find the key codes in your printer manual, most DOS manuals and the most commonly used are listed in the appendix of this manual. This is the order they are in, the default is entered in brackets: - 1st field (013) This field selects the message and let Concord go into message view mode. By default it is the RETURN key. Key code 013. - 2nd field (032) This field executes the question for searching for a string. By default this is the SPACE. Key code 032. - 3rd field (081) This field quits the message list and returns you to the menu you were in when you selected the message list option. By default the Q key. Key code 081. - 4th field (063) This field brings up the help screen. This help file is called SELMSG.ANS. By default this is the ? key. Key code 063. - 5th field (077) This key marks messages in the list which you can then read with the read marked menu option. By default this is the M key. Key code 077. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 25 Line 092 : 04;^C13,1; Enter search string : ^E3;^L20; Description : Question shown to the user when he/she wants to search for a string in the message list screen. Line 093 : 04;^C13,1; Enter msg number to jump : -> ^E3;^L5; Description : Line shown to the user when he/she enters a number of a message to jump to in the message list screen. Line 094 : ^G1,1^C15,1; NUM X FROM -> TO SUBJ -> RCVD DATE^E3;^C15,0;^M;^E3;^M; Description : This is the white text and blue bar on top of the message list screen. Line 095 : ^C15,0;^E3;^M;^C15,1; Press ENTER to -> select msg, SPACE to find msg or Q to -> cancel.^E3; Description : Line shown at the bottom of the messages list screen, telling the user which options are available. Line 096 : ^X-79;^C14,1;@MAREA_NUM@:05 -> @MAREA_GROUP@.03 @MAREA_NAME@-> ^E3;^C15,0; Description : Used by Concord when scanning areas in, for example, reading messages in combined areas. Line 097 : ^C15,0;File to upload (Enter to stop) -> : ^C14,1;^L12;^C15,0;^M; Description : Line shown to the user when he/she selected the upload command and Concord wants to know which file(s) are going to be uploaded to the system. Line 098 : ^C14,0;Enter descriptions for files to -> upload^M; Description : Textline shown when Concord wants to know what the file description is of the file that is going to be uploaded. Line 099 : ^X-79;^E3;^C12,0;%1.12 ^C14,1;^L60;^C15,0; Description : Line used by Concord as the line with the filename and the place to enter the filedescription when doing an upload. This line is shown below textline 098 and is used for every file to be uploaded. It will display the filename and then the field where the user can enter the filedescription. The %1 is replaced with the filename. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 26 Line 100 : ^X-79;^E3; ^C14,1;^L60;^C15,0; Description : Used by Concord as the second and following lines of the file description. Concord only shows the filename on the first line of the file description when a user is entering descriptions. This is in textline 099. For the rest of the description, Concord will display the line as it appears here. Line 101 : ^C15,0;Next file in transfer queue : -> ^C12,0;%1^15,0;. Description : Textline informing the user which file is expected by Concord as the next file to be uploaded. Line 102 : Press Ctrl-R to redraw screen, Ctrl-W -> to clear window, Ctrl-Z to end chat. Description : Shown in the chat window informing you and the user about the keys available while in chat. (It starts with a space.) Line 103 : ^C15,0;Online message from %1 on node -> %2 :^M;^C14,0; Description : Textline informing the user that there is a message from on of the other lines. The %1 is replaced by the name of the sender, the %2 is replaced by the node number. Line 104 : 01,Y,Y,Y;^C14,0;@WHO_NUM@:05 @WHO_NAME@-> .25 @WHO_CITY@.25 @WHO_BPSRATE@:05 -> @WHO_WHATDONE@^E3;^M; Description : Line used by Concord to display the people online on all nodes when the user uses this menu function. It shows the node the user is on, the name of the user, the city, the Bps rate and what he/she has done. Line 105 : 01,37,014,112;^C14,0;@WHO_NUM@:05 -> @WHO_NAME@.25 @WHO_CITY@.25 -> @WHO_BPSRATE@:05 @WHO_WHATDONE@^E3; Description : Line used by Concord to display the people online on all nodes when the user uses this menu function. It shows the node the user is on, the name of the user, the city, the Bps rate and what he/she has done. Line 106 : 013,032,081,063 Description : These are the key codes generated by the keyboard for the various functions in the node list screen. If you want to use different keys for the options, this is where you change them. This is the order they are in, the default is entered in brackets: ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 27 - 1st field (013) This field selects the node number to which you want to sent a online message. By default this is the RETURN key. Key code 013. - 2nd field (032) This field executes the question for searching for a node. By default this is the SPACE. Key code 032. - 3rd field (081) This field quits the node list and returns you to the menu you were in when you selected the node list option. By default the Q key. Key code 081. - 4th field (063) This field brings up the help screen. By default this is the ? key. Key code 063. Line 107 : 04;^C13,1; Enter search string : ^E3;^L20; Description : Question shown to the user when he/she wants to search for a string in the node list screen. Line 108 : 04;^C13,1; Enter node number : ^E3;^L5; Description : Line shown to the user when he/she enters a number of a node to sent an online message to. Line 109 : ^G1,1;^C15,1; NODE NAME -> CITY BPS -> DURWQYN^E3;^C15,0;^M;^E3;^M; Description : Textline above the list of nodes when the user is viewing the other users on-line. The DURWQYN stands for: D - Download U - Upload R - Read message W - Write message Q - Offline mail system Y - Yelled Sysop N - New user ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 28 Concord displays a '-' if the user didn't use this option in the BBS and a 'X' if the user did one of the options. You could have a list like this: X-X-----, which would mean that the user did a download and read a message. Line 110 : ^C15,0;^E3;^M;^C15,1; Press ENTER or -> node number to sent msg, Space to find -> node or Q to cancel.^E3; Description : Text at the bottomline of the screen in the node list screen informing the user about the options available. Not all options are by default on this line. See for keys that are active textline 106. Line 111 : DOWN Description : When Concord shows the status of the other nodes and the node is down, this line is shown. Line 112 : Waiting for call Description : Same as in 111, but line is waiting for a call. Line 113 : Doing nothing special Description : Same as in 111, but user is in a menu or doing something that is not listed in one of the options. Line 114 : Downloading file(s) Description : Same as in 111, but user is downloading a file. Line 115 : Uploading file(s) Description : Same as in 111, but now the user is uploading a file. Line 116 ; Reading message(s) Description : Same as in 111, but the user is reading messages. Line 117 : Writing message Description : Same as in 111, but user is writing a message. Line 118 : Chatting with %1 Description : Same as in 111, but the user is chatting with somebody. The %1 is replaced by the name of the user or Sysop. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 29 Line 119 : Using door %1 Description : Same as in 111, but the user is using a external program. The %1 is replaced by the name of the door. Line 120 : Logging in Description : Same as in 111, but the user is logging in to the system. Line 121 : Using QWK/OMEN offline msg system Description : Same as in 111, but the user is using the offline mail system. Line 122 : Browsing filelist Description : Same as in 111, but the user is browsing the file lists. Line 123 : 01,Y,Y,Y;^C14,0;@BBSLIST_NUM@:05 -> @BBSLIST_NAME@.25 @BBSLIST_BPSRATE@:05-> @BBSLIST_NUMBER@.15 BBSLIST_OPEN@.11-> @BBSLIST_VERIFIED@^E3;^M; Description : Line used by Concord to display the BBS list when the user selects the BBSlist option. Line 124 : 01,79,014,112;@BBSLIST_NUM@:05 -> @BBSLIST_NAME@.25 @BBSLIST_BPSRATE@:05-> @BBSLIST_NUMBER@.15 BBSLIST_OPEN@.11-> @BBSLIST_VERIFIED@^E3; Description : Line used by Concord to display the BBS list when the user selects the BBSlist option. Line 125 : 013,032,081,063 Description : These are the key codes generated by the keyboard for the various functions in the BBS list screen. If you want to use different keys for the options, this is where you change them. This is the order they are in, the default is entered in brackets: - 1st field (013) This field selects the BBS from which you want to see the extended information. By default this is the RETURN key. Key code 013. - 2nd field (032) This field executes the question for searching for a BBS. By default this is the SPACE. Key code 032. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 30 - 3rd field (081) This field quits the BBS list and returns you to the menu you were in when you selected the BBS list option. By default the Q key. Key code 081. - 4th field (063) This field brings up the help screen. By default this is the ? key. Key code 063. Line 126 : 04;^C13,1; Enter search string : ^E3;^L20; Description : Question shown to the user when he/she wants to search for a string in the BBS list screen. Line 127 : 04;^C13,1; Enter record number : ^E3;^L5; Description : Line shown to the user when he/she enters a number of a BBS he/she wants to see the extended BBS info. Line 128 : ^G1,1;^C15,1; NUM NAME -> BPS PHONENUMBER OPEN -> VERIFIED^E3;^C15,0;^M;^E3;^M; Description : Line shown above the bulletin boards list, explaining what the information is that is displayed by Concord. Line 129 : ^C15,0;^E3;^M;^C15,1; Press ENTER or -> number to view BBS info, SPACE to find -> BBS or Q to cancel.^E3; Description : Line shown at the bottom of the BBS list, telling the user which options are available. Line 130 : ^C15,0;Menu is open daily from %1 to %2.-> ^M; Description : Textline shown to the user when the user wants to access a menu that is closed because of the times you defined. The %1 is replaced by the opening time, the %2 is replaced by the closing time. Line 131 : ^C15,0;You are the first caller today!^M; Description : When a user views the today's callers list and he/she is the first user, this line is shown. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 31 Line 132 : 02;^E1;^C14,1; Node Name -> City Bps Logon -> Logoff DURWQYN^E3;^C15,0;^M;^E3;^M; Description : Textline shown above the callers lists. The 02 means how many lines the header (1 line) and the more prompt (1 line) takes. This line is used for the last caller list and for the today's callers list, explaining the user what is displayed. For an explanation of the DURWQYN, please see the description of textline 109. Line 133 : ^C7,0; @LAST_NODE@:04 ^C15,0;@LAST_NAME@-> .20 ^C14,0;@LAST_CITY@.25 ^C13,0;@LAST_-> BPSRATE@:05 ^C12,0;@LAST_LOGONTIME@:05 -> @LAST_LOGOFFTIME@:05 ^C10,0;@LAST_WHAT-> DONE@^M; Description : Concord will replace the macro codes in this textline with the needed information to create the last caller and today's callers lists. This line is the line with the usernames and when they logged on and off and what they did. Line 134 : Local Description : Textline used by Concord when the baudrate of the caller was 0, in other words a local call. Concord will use this textline instead of putting a 0 in the last callers and today's callers lists underneath the BPS rate. Please note that this line should not have more then 5 characters. Line 135 : ^C15,0;Your time left is reduced due to -> approaching system event (at @NEXT_EVENT@-> ).^M; Description : Shown to the user at logon when the time online is adjusted because there is an event coming up. Line 136 : ^C15,0;Your calls per day limit has -> been exceeded. Call again tomorrow. -> Bye...^M; Description : Concord will show this line to users who exceeded their daily call limit as set in the limits. After showing this line, Concord will disconnect. Line 137 : ^C15,0;^M;Which message editor do you -> want to use?^M; Description : Textline shown when Concord needs to know which editor the user wants to use. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 32 Line 138 : ^C14,0;@EDITOR_KEY@^C7; - ^C11;-> @EDITOR_NAME@^M; Description : Line used by Concord to display the available message editors. Used together with line 137. Line 139 : ^C10,0;^M;@EDITOR_NAME@ selected.^M; Description : Textline used by Concord to inform the user which editor he/she selected. Line 140 : ^C12,0;You do not have write rights -> to area @MAREA_NAME@.^M; Description : When a user selects the write message command in an area he/she has no rights to write a message, Concord will display this textline. Line 141 : ^C12,0;The destination address of the -> net mail message to %1^M;was empty. -> ^C14,0;Enter new destination or press -> <Enter> to kill message :^M;^C15,1;-> ^L17;^C14,0;^M Description : There was a message entered in the netmail area, but Concord could not find the destination address, and asks the user for it. The %1 will be replaced with the name of the person the message is for. Line 142 : ^C12,0;^M;Private message was addressed -> to 'All'. Discarded.^M; Description : This line is shown when there was a private message addressed to 'All'. When mail is addressed to All, it can never be private. This is for the offline mail reader part of Concord. Line 143 : ^C12,0;^M;No replies are allowed on -> area %1. Discarded.^M: Description : Concord will show this message if there is a message in the offline mail system for an area where replies are not allowed. Line 144 : *; : Description : Character to inform the user if the file is tagged. The character before the first semicolon is the 'ON' character, the character before the second semicolon is the 'OFF' character. This character is shown in the file lists. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 33 Line 145 : ^C14,0;^E1;^C14,1;Starting to move -> files...^M; Description : Shown by Concord when the program is moving files to a directory at the beginning of the move. Line 146 : ^C15,0;^M;Which packer do you want -> to use?^M; Description : This line is above the list of archivers available, when Concord needs to know which archiver to use. Line 147 : ^C14,0;@PACKER_KEY@^C7; - ^C11;-> @PACKER_NAME@^M; Description : Concord will use this line as many times as you have packers defined in the configuration part of the program. This line is the line that displays the archiver and the selection key. Line 148 : ^C10,0;^M;@PACKER_EXT@ selected.^M Description : This is the line that informs the user which archiver he/she selected from the list. Line 149 : ^C15,0;Please enter your choice -> (^C14;%1^C15;): Description : Line shown by Concord when the user is asked to select from a list. The %1 is replaced by the default selection key. This is the first option defined in the configuration. This line is used when selecting a archiver, protocol, editor, character set, etc... Line 150 : ^C15,0;^M;Which transfer protocol do -> you want to use?^M; Description : Line shown to the user when Concord wants to know which transfer protocol to use. This is the line above the available transfer protocols. Line 151 : ^C14,0;@PROT_KEY@^C7; - ^C11;-> @PROT_NAME@^M; Description : This line is used by Concord to display the transfer protocols available. It is used as many times as there are protocols defined. Line 152 : ^C10,0;^M;@PROT_NAME@ selected.^M; Description : Line informing the user about the protocol he/she selected. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 34 Line 153 : ^C15,0;There is @DISKSPACE@ KB free on -> current disk.^M; Description : Textline shown to the user informing him/her about the amount of free diskspace on the harddisk. This is shown before an upload is done. Line 154 : ^C15,0;^M;Move file %1 from directory : -> ^C15,1;^L40;^C14,0;^M; Description : Shown at a local upload when Concord wants to know where to move the file from that is 'uploaded' to the system. The %1 is replaced by Concord with the filename. Line 155 : ^C10,0;^M;Press <^C14;~1Enter^C10;) to -> start transfer, <^C14;~2A^C10;> to -> abort, <^C14;~3!^C10;> to log off after -> transfer,^M; <^C14;~4P^C10;> to -> change transfer protocol.^W;^M; Description : Line shown before a transfer is started informing the user about the available options. Line 156 : ^C15,0;Start your transfer now or press -> <^C14;Ctrl-X^C15;> over a dozen times -> to abort.^M;^M; Description : Concord shows this line when the transfer is started, informing the user that the transfer can be aborted by pressing ^X several times. After showing this line, Concord will call the transfer protocol. Line 157 : ^C12,0;Transfer aborted. Try again? -> (~1Y/~2n)^W;^M; Description : Concord shows this line when the transfer was aborted, giving the user the option to start again. Line 158 : ^C13,0;Logoff in ^C15;%1^C13; seconds. -> Press <^C14;!^C13;> to logoff now or -> <^C14;~A^C13;> to abort logoff.^W;^M;^M; Description : When the user selected to log off after the file transfer, Concord shows this textline to the user. The %1 is replaced by the number of seconds left before logoff. Line 159 : ^C15,0;^M;Where to copy files in down-> load queue :^M;^C15,1;^L67;^C14,0;^M; Description : If you are logged on locally, Concord will not start a download protocol but instead ask you where to move the file(s) in the download queue. This line is that question. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 35 Line 160 : ^C14,0;Which name to use? ^C15,1;^l35; ^C14,0;^M; Description : When a user wants to enter a message and an alias can be used, Concord shows this line to ask for the alias. Note that this line is only used when any alias can be used, not just the alias defined in the userbase. Line 161 : ^C14,0;Use alias? (~1y/^2N)^W;^M; Description : When the user wants to enter a message in an area where either his/her real name or the in the userbase defined alias can be used, Concord will show this line to ask the user if he/she wants to use an alias. Line 162 : ^C14,0:Public? (~1Y/~2n)^W;^M; Description : Concord will show this line when the user wants to enter a new message and the area allows the use of private and public messages. Line 163 : ^C12,0;User not found. ^C15,0;Use "?" -> or "<searchstring>?" to scan user names -> and aliases.^M; Description : When the user enters a message in a local area and the user does not exist in the userbase, Concord will show this line informing the user about the fact that the addressee does not exist. | Line 164 : ^C14,0;^]@MAREA_KINDS@<>1;^M;Enter "All" -> | if message is to everyone. ^]1;^M;To -> (?=List) : ^C15,1;^L35;^C14,0;^M; Description : Textline shown to the user when he/she starts entering a new message and Concord wants to know who the message is to. | Depending on the area type the full line is | shown or only the last bit. Line 165 : ^C14,0;^M;Subj : ^E3;^C15,1;^L72;-> ^C14,0;^M; Description : Line shown to the user when Concord wants to now the subject of the new message. Line 166 : %1 entered a message addressed to you. Description : An user on an other line entered a message addressed to you. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 36 Line 167 : This message is a reply to a message -> originally posted^M;by @MSG_FROM@ to -> @MSG_TO@ on @MSG_DATE@ :^M;^M; Description : This line is used in a reply message as the header of the new message informing the reader where you quoted the text in the message from. Please note that quoting should be used with care, otherwise mailflow will grow considerably and will get to expensive. Line 168 : ^C7,0;^M;[@TAGFILES_COUNT@ files -> (@TAGFILES_KB@k, @TAGFILES_TIME@ min) -> already waiting in your download queue]-> ^M;^C15,0;Enter file(s) to download -> (Enter to continue) : ^M;^C15,1;^L79;-> ^C14,0;^M; Description : When the user selects the download command from the menu this line is shown informing the user about the number of files tagged. Then the user is given the option to add files for the download. Line 169 : ^C12,0;No files were found to download. -> Press ENTER to continue.^A;^M; Description : Line shown to the user when there are no files to download, but the user selected the download option and either didn't enter any files to download when Concord asked for the files (line 168) or entered a file which does not exist on the system. Line 170 : 06;^C15,0;^E1;^M;protocol: @PROT_NAME@-> ^M;Files to transfer:^M;^C9,0; Description : Line shown to inform the user about the number of files that are ready to be transferred and the name of the protocol to be used for the transfer. The actual filenames are displayed by line 171. Line 171 : %1.13 Description : Concord uses this line to display the filenames mentioned in the previous line. The %1 is replaced by the filename. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 37 Line 172 : ^C15,0;Total of ^C12,0%1^C15,0; files -> consuming ^C12,0;%2^C15,0; bytes of -> disk space;^M;Transfer takes about -> ^C12,0%3^C15,0; minutes.^M;^M; Description : Line informing the user about the amount of kilobytes to transfer and the time this will take. This line is shown after line 170 and 171. The %1 is replaced by the number of files, the %2 is the amount of kilobytes and %3 is the time that is needed to transfer the files. Line 173 : ^C14,0;^M;Enter msg number to jump to -> : ^C14,1;^L6;^C14,0;^X-40;^E3; Description : Shown to the user/Sysop when the jump message command is pressed while reading messages and Concord needs to know to which message to jump. Line 174 : ^C12,0;^M;Are you sure to delete this -> message? (~2y/~1N) ^W;^X-40;^E3; Description : Shown to the user/Sysop when he/she selects the delete command from the options while reading messages. Line 175 : ^C14,0;^M;Search for text : ^C14,1;^L40;-> ^X-40;^E3; Description : When a user presses the message search command while reading messages this line is displayed asking for the text to search for. Line 176 : ^C15,0;Searching for next occurrence... -> Press Ctrl-Z to abort.^M; Description : While Concord is searching for the text entered by the user in line 175, this line is displayed. Line 177 : ^C14,0;Press <~1Q> to quit, <~2C> to -> change information, <~3R> to remove -> from list,^M; <~4V> to verify -> existence or <~5A> to show again. -> (Q/C/R/V/A)^W;^M; Description : Textline shown underneath the extended BBS information in the BBS list. Line 178 : ^C14,0;Are you sure to remove BBS from -> list? (~1y/~2N) ^W;^M; Description : When the remove option in line 177 is used, this line is shown to ask if you are sure to remove the BBS from the BBS list. Line 179 : ^C12,0;BBS removed.^M; Description : Concord confirms the fact that the BBS has been removed. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 38 Line 180 : ^C12,0;BBS verified.^M; Description : Concord confirms that the BBS has been verified by the Sysop. (See line 177) Line 181 : ^C14,0;Which BBS to operate : ^C14,1;-> ^L40;^C15,0;^M; Description : Shown when Concord wants to know which BBS you want to add, change, remove etc. Line 182 : *; ; Description : Character to inform the user if the message area is part of his/her Combined message areas. The character before the first semicolon is the 'ON' character, the character before the second semicolon is the 'OFF' character. Line 183 : *; ; Description : Same as in line 182, except this line is used to display combined areas in the file selection screen. Line 184 : *; ; Description : Same as in line 182, except this line is used to display mail areas to be scanned for new mail in the mail area selection screen. Line 185 : R; ; Description : Same as in line 182, except this line is used to display of a message is received or not in the message selection (quickscan) screen. Line 186 : ^C14,0;Which offline format do you want -> to use? (~2Q)WK, (~4B)luewave, (~3O)men,-> (~1A)SCII?^W;^M; Description : Line which Concord uses to ask the user which offline format he/she wants to use for the mailsystem. Line 187 : ^C11,1;%2:05^X-05; Description : This line is used by Concord to inform the user about the progress that is made in exporting messages in the offline mail system. %1 is replaced by the number of messages exported in the current area, %2 is replaced by the number of total messages exported in all selected areas so far. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 39 Line 188 : ^C12,0;Last read pointer file uploaded. -> Are you sure to update pointers? (~2y/-> ~1N) ^W;^M; Description : When Concord receives an upload package for the offline mail system and there is a file with updated lastread pointers included, Concord will ask for a confirmation of the user if he/she really wants to update the counters. Line 189 : ^C12,0;Updating last read pointers! -> Please stand by, this might take a -> while...^M; Description : When the user answered positive to the previous question (line 188) Concord will display this message informing the user about the fact that his/her lastread pointers are updated. Line 190 : ^C12,1; Delete file @FILE_NAME_EXT@ -> and remove from list? (~2y/~1N) ^E3;-> ^W;^X-40; Description : When you have Sysop level access to a file area and you are listing the files, you can press the delete key (or any other key you defined) and remove a file from the list. This line is used by Concord to ask if you are sure you want this file to be removed. Please note that you need Sysop access to the file area to use this option. Line 191 : ^C15;Please select your language:^M; Description : Line shown above the available languages when Concord asks the user which language he/she wants to use. Line 192 : ^C14,0;@LNG_KEY@^C11; - @LNG_DESC@^M; Description : Concord will use this line to display the available languages to the user. Line 193 : ^C15,0;Please enter your choice (^14;%1-> ^C15;): Description : Line displayed by Concord when the user is asked for his/he language. The %! is replaced by the default selection key. This is the first language defined in the control file. Line 194 : ^C10,0;^M;using '@LNG_DESC@'.^M; Description : Textline to inform the user which language file Concord is going to use. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 40 Line 195 : ^C15,0;Which charset do you want to use?-> ^M; Description : When the user has the choice between the different charactersets available in Concord, the BBS program will use this line to ask the user about the characterset to use. Line 196 : ^C14,0;@CHARSET_KEY@^C7; - ^C11;-> @CHARSET_NAME@^M; Description : This line is used by Concord to display the available charactersets. Line 197 : ^C10,0;^M;@CHARSET_NAME@ selected.^M; Description : Textline to inform the user about the chosen characterset. Line 198 : ^C15,0;^M;Enter your comment to next -> user (Max. 5 lines) :^M;^C14,0;-> <-------//--->^M; Description : Line shown to the user when he/she can enter a comment to the next user. The line of minus characters is 77 characters long and displayed above the line where the user can enter the comment, informing the user about the line length. Line 199 : ^C15,1;^L79;^C15,0;^M; Description : This is the line used by Concord to display the area where the user can enter the comment for the next user. Line 200 : ^M;^C13,0;Save comment? (~1Y/~2n) -> ^W;^M;^M; Description : Textline used by Concord to ask the user if he/she wants to save the comment. Line 201 : ^M;^C12,0;Logout comment^M;^M;^C12,0;-> Date : ^C14,0;@CURRDATE@ @CURRTIME@^M;-> ^C12,0;From : ^C14,0;@NAME@ ^C12,0;-> from ^C14,0;@CITY@^M;^C12,0;To : -> ^C14,0;Next user^M;^M;^C11,0; Description : Textline with information about who wrote the comment to next user when a comment is shown to the next user. Line 202 : ^M:^C15,0;Press ^C7,0;[^C14,0;ENTER-> ^C7,0;] ^C15,0;to continue.^A;^M; Description : Textline shown by Concord after showing the comment to next user. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 41 Line 203 : ^M;^M;^C12,0;N O D E S H U T D O W N -> ! Please call back later...^M;^M; Description : When a node line is (going) down this textline is shown to the user informing him/her about that fact. Line 204 : ^C10,0;Checking for new bulletins...^M; Description : Textline shown by Concord when it is scanning for new bulletins. Line 205 : ^C10,0;No bulletins found.^M;^M; Description : Textline shown by Concord informing the user about the fact that there are no new bulletins. Line 206 : ^C10,0;Select bulletin to view (~AQ=-> Quit, %1) [Q] : ^W;^M;^M; Description : Textline informing the user about the new bulletins available. The %1 is replaced by the number of the new bulletin(s). Line 207 : ^C10,0;^E1;List of bulletins :^M; Description : Textline telling the user that the following bulletins are new. Line 208 : ^C14,0;%1 ^C7,0;- ^C13,0;%2 ^C7,0;- -> ^C15,0;%4^M; Description : Concord uses this line to display the bulletins to the user. The %1 is replaced by the bulletin number. The %2 is the Bulletin name and %4 is the description. Line 209 : ^C15,0;^X-79;Enter string to search: -> ^E3;^C14,1^L40;^C15,0;^X-79;^E3;^CN,N; Description : Line 210 : ^C14,0:Sysop shelled to DOS!^M; Description : This line is used when the Sysop shelled to DOS level when a user is online. (Alt-J key) Line 211 : ^C14,0;Sysop came back...^M; Description : Shown when the Sysop returns from the MS-Dos operating shell. Line 212 : Online message to node #%1 Description : Used by Concord when there is a message for one of the other lines. The %1 is replaced by Concord by the node number. Line 213 : ^C14,0;Processing file request "^C15,0;-> %1^C14,0;"...^M; Description : When Concord is processing a file request received through the offline mail system, Concord shows this line. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 42 Line 214 : ^C14,0;Setting message areas... Hold on-> ...^M; Description : Shown by Concord when the program is changing the settings for the user concerning the message areas. Line 215 : ^C15,0;Message saved : ^M;^C13,0;To: -> ^C11,0;@MSG_PRIV@:01 ^C14,0;@MSG_TO@-> ^M;^C13,0;Subj: ^C14,0;@MSG_SUBJ@^M;-> ^C13,0;Area: ^C14,0;@MAREA_NAME@^M; Description : This information is shown to the user after he/she wrote a message or replied to another message and saved this message. Concord displays the information, so the user knows the message is saved. Line 216 : ^C7,0;This is kinda weird time to call -> for the Sysop. You may have better -> chances to reach him^M;during the day -> light...^M; Description : Shown to the user when the Sysop is paged outside paging hours. Line 217 : ^C7,0;Sysop may not be currently -> available. Please try later again...^M; Description : Textline used by Concord to inform the user the Sysop is not available for a chat. Line 218 : ^C7,0;You have already paged Sysop. -> Just relax and have a seat, or perhaps -> you can^M;come back later...^M; Description : Shown to the user when he/she exceeded the total number of pages to the Sysop but still tried again. Line 219 : ^C14,0;Please sent your reply message -> packet (.REP. .NEW, OMEN...) now...^M; Description : Line shown to the user when Concord is ready to receive the new messages and replies in the offline mail system. Line 220 : ^C14,0;Area # Description -> Total msgs Msgs to you -> Msgs packed^M;^C7,0---------//---^M; Description : Textline shown as a header when Concord is packing the messages in the offline mail system. The line is the full length of the screen. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 43 Line 221 : ^C15,0;^X-79;@MAREA_NUM@:06 @MAREA_NAME@-> .33 @MAREA_MAX@:10 %1:10 %2:10^E3;^M; Description : This line is used by Concord when packing the messages in the offline mail system. it informs the user about the number of messages in the area, the number of messages to the user and the number of messages packed. This line is used for every area that is defined for the offline mail system. Line 222 : ^C7,0;-------//-----^M;^C14,0; -> Total %1:10-> %2:10 %3:10^M;^M; Description : Starting with a line, this textline is the end of the list where Concord is packing the offline messages. It shows the line and then the totals for this session. The line is shown shortened for easy reading. Line 223 : ^C15,0;Hold on, packing messages...^M; Description : Textline shown when Concord is shelling to the archive program to pack the messages selected in the offline mail system. Line 224 : ^C15,0;No messages found to pack.^M; Description : Textline shown by Concord when there are no messages to pack in the offline mail system. Line 225 : ^C14,0;Hold on, exporting BBS list... -> (Press Ctrl-C to abort.)^M; Description : Line shown to the user when Concord is preparing the internal BBS list for download to the user. Line 226 : ^C14,0;Examining BBS list...^M; Description : Shown when Concord is searching the BBS list for a BBS. Line 227 : ^C12,0;BBS not found!^M; Description : Shown when Concord can't find the specified BBS. Line 228 : ^C12,0;Duplicate BBS name found - you -> have to give another BBS name.^M;New -> name: ^C14,1;^L35;^C15,0;^M;^M; Description : When the user enters a BBS name in the BBS list and this name already exists, Concord will ask for a new name. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 44 Line 229 : ^C13,0;BBS named "@BBSLIST_NAME@" has -> not been verified since @BBSLIST_-> VERIFIED@^M;If this BBS is still -> operating, please (V)erify it to keep -> it in BBS list.^M;^C15,0;Press ENTER -> to see BBS information.^A;^M; Description : Concord has the option to erase BBSses from the BBS list when they are not verified for a certain amount of time. When a Sysop calls and his/her BBS has not been verified for the amount of time defined in the configuration of the program, he/she will she the above question. Line 230 : 04;^C13,1; Set combined areas : ^E3;^L40; Description : When a user selects the combined area change key in the mail area list, Concord will display this question. The 04 tells Concord where to place the cursor in the area list screen. 01, 02 are the two topmost lines, 03, 04 are the two bottom lines. Line 231 : 04;^C13,1; Set combined areas : ^E3;^L40; Description : When a user selects the combined area change key in the file area list, Concord will display this question. Line 232 : ^C14,0;Setting areas, hold on...^M; Description : When Concord is changing the combined area settings, this line is shown to the user. Line 233 : ^C12,0;Max number of messages in one -> packet exceeded. No more added to this -> packet...^M; Description : This line informs the user that the maximum number of messages allowed in one offline mail packet has been reached. Concord will stop searching for more mail and start packing the messages. The rest of the messages can be packed when the download option is selected again. Line 234 : ^C12,0;Out of disk space. No more -> messages added to this packet...^M; Description : When Concord is exporting messages and runs out of diskspace, this message is shown. After this, Concord will start packing messages. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 45 Line 235 : ^M;New files list from %1 to %2 -> (%3 days). Description : In the offline mail packets is also a newfiles list. At the top of this list, this textline is shown. The %1 is the date the user used the offline mail system for the last time. The %2 is the date the mail packet was created and the %3 is the number of days between them. Don't use colour codes in this line, since this one is shown to the user in the offline mail reader and is standard ASCII. Line 236 : ^C14,0;Exporting new files list... -> (Press Ctrl-C to abort.)^M; Description : Textline shown to the user when Concord is generating the new files list for the offline mail packet. Line 237 : ^C15,0;Area: @FAREA_NAME@ ... ^E3;^C14,0; Description : Line shown to the user to inform him/her of the area Concord is currently scanning for the new files list in the offline mail packet. Line 238 : @FILE_NAME_EXT@@FILE_SIZE_KB@:04 -> @FILE_DATE_SMALL@ [@FILE_DLCOUNT@:03] Description : This is the line as it is used by Concord to display the new files in the newfiles list in the offline mail reader. Do not use colour codes in this line, since it is normal ASCII. Line 239 : ^C7,0;[Scanning...]^X-15; Description : Shown to the user when Concord is scanning for new messages at a mail scan. Line 240 : ^C7,0;{WAIT}^X-10; Description : Textline shown to the user when Concord is busy doing something and the user has to wait for a moment. Line 241 : ^C7,0;Press Enter to continue.^M;^A; Description : Line used by Concord when the user has to press Enter. Line 242 : ^M; Detecting terminal emulation... Description : Textline shown when Concord is detecting the type of terminal emulation the user is using. This line is used just after a connection has been established. Line 243 : ^C14,0;^E1;Tagged files list :^M;^M; Description : Header for the tagged file list. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 46 Line 244 : 05,03; ^C15,0%1:03. ^C13,0;%2:12 -> ^C11,0;%3:04^C10,0;k Description : This line is used by Concord to build the tagged file list. The %1 is replaced by the number of the file. the %2 is the file name and %3 is the amount in Kbytes. The 05 tells Concord how many lines the header plus more prompt takes, the (first) 03 tells Concord how many columns there are in the tagged file list. Line 245 : ^M;^C14,0;Total of ^C15,0;@TAGFILES_-> COUNT@ ^C14,0;files (^C15,0@TAGFILES_-> KB@^C14,0;k, ^C15,0;@TIME_LEFT@ ^C14,0;-> min.^M;^M; Description : Showing the totals of the tagline, Concord shows this line to the user when he/she selected to edit the tagfiles list. Line 246 : ^C7,0;(^C14,0;~2R^C7,0;)^C15,0;emove -> file(s) from the download queue, ^C7,0;-> (^C14,0;~1Q^C7,0;)^C15,0;uit? ^W;^M;^M; Description : Informing the user about the options in the tagged files edit list, this line is shown by Concord. Line 247 : ^C14,0;Which files to remove from -> download queue? Give name(s) or -> number(s)...^M;^C14,1;^L79;^C14,0;^M;^M; Description : When the user selects to remove a file from the tagged file list, Concord will show this line to ask which file to remove. Line 248 : ^C12,0;Duplicate file @FILE_NAME_EXT@ -> found! Press Enter.^A;^M; Description : Textline shown to an uploader when the file he/she wants to upload is already available on the BBS. Line 249 : ^C15,0;^M;Checking uploaded file %1 -> ...^M; Description : Textline shown by Concord when the program is checking the uploaded file. The %1 is replaced by the filename. Line 250 : ^C12,0;VIRUS found from uploaded file!^M; Description : The anti virus program returned a wrong errorlevel to Concord and Concord informs the user that a virus has been found. This is not always the case, you might have set the settings for the virusscanner wrong, so please check this carefully when you see this with every uploaded file. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 47 Line 251 : ^C15,0;Tossing message packet to message-> base...^M; Description : When Concord is tossing the mail received in the uploaded reply packet for the offline mail reader to the message base, Concord will show this textline. Line 252 : ^C12,0;Duplicate message found from -> message packet. Deleted. Press Enter.-> ^A;^M; Description : When there is a duplicate message found in the reply packet for the offline mail system, this textline is shown and the message is deleted. Line 253 : List of users in chat channel %2 :^M; -> # Nick Name -> City Description : header for the list with users in the multinode chat. 'Nick' is the name the user is using in the multinode chat. Line 254 : @WHO_NUM@:03 %1.15 @WHO_NAME@.35 -> @WHO_CITY@ Description : The line that Concord will use to display the names of the people in the multinode chat. The %1 is replaced by the nick name the user is using. Line 255 : * List of chat channels :^M; # Name -> Users Topic Description : A listheader for the available chatchannels that are available. Line 256 : %1:03 %2.30 %3:05 %4.35 Description : This line is used by Concord to display the information about the chatchannels. The %1 is the number, %2 the name, %3 the number of users and %4 the topic. Line 257 : 007,007,013,007,007,031 Description : These are the colours used in the multinode chat. Here's a list: 1st Text colour in the multinode chat. Default 007. 2nd The colour for the lists in the multinode chat. Default 007. 3rd Colour for private messages. Default is 013. >> Continue >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 48 4th Colour for /ME messages. Default is 007. 5th Colour for information strings in the multinode chat. Default is 007. 6th This is the edit colour in the multinode chat. You can change these colours as you like. Line 258 : No users in this channel Description : Show to the user when there are no users in the multinode chatchannel. Line 259 : General area Description : Default name of the first chatchannel. This one is defined by the Sysop, other chatchannels can be defined by the users. Line 260 : 01;^C15,0;^E1;Welcome to Concord multi -> node chat system.^M; Description : Textline that welcomes users into the multinode chat. Line 261 : %1 (@NAME@ from @CITY@) joins the -> channel... Description : Informing the other users in the chat that a new user is online in the chatchannel. The %1 is replaced by the nickname the user is using in the chatchannel. Line 262 : %1 (@NAME@) is now known as %2 Description : When a user changes his/her nickname, this line is used to inform the other chatchannel users about the name change. Line 263 : Changing current chatchannel to %2 -> (%3 users), title: "%4". Description : When changing a chatchannel, Concord informs the user with this line. The %2 is the chatchannel number, %3 the number of users in the channel and %4 the name of the channel. Line 264 : Changing current chat channel title to %4. Description : Line informing users in the chat channel that the name has changed. %4 is the new name. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 49 Line 265 : %1 (@NAME@ from @CITY@) leaves the -> channel... Description : Informing the other users in the chat that an user is offline in the chatchannel. The %1 is replaced by the nickname the user is using in the chatchannel. Line 266 : ^C15,0;Message marked...^P;^M; Description : Shown when a message is marked in the messages list screen. Line 267 : *; ; Description : Character to inform the user if the mail area is marked as being used in the offline mail packet. If the mark is on, Concord will download messages from this area into the offline mail packet. The character before the first semicolon is the 'ON' character, the character before the second semicolon is the 'OFF' character. Line 268 : ^STRASHCAN.ANS; Description : Shown to the user when his/her name is found in the trashcan of the BBS. This trashcan is an ASCII file with names. When the name used to log in to the BBS is in this list, line 268 is displayed. In this case, because of the ^S<filename>; code, it means that the ANSI file TRASCHCAN.ANS is displayed. This file should be in your textfile directory. Line 269 : ^C12,0;Sorry, file ^C15,0;%1 ^C12,0;is -> not accepted due to system policy.^M; Description : When a upload is refused because of system policy, this line is displayed. You can define unwanted files in the control files from Concord. %1 is replaced by the filename. Line 270 : ^C15,0;File %1 requires password.^M; Description : Line to inform the user that the selected file can not be downloaded without the proper password. The %1 is replaced by the filename. Line 271 : ^C14,0;QWK setup: Adding msg area -> @MAREA_NAME@ to user combined boards.^M; Description : Textline shown to the user when he/she used the ADD option in QWK. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 50 Line 272 : ^C14,0;QWK setup: Adding msg area -> @MAREA_NAME@ to user combined boards -> and^M;setting last read pointers to -> #@LASTREADPTR@ or @MAREA_MAX@ msgs.^M; Description : Textline shown to the user when he/she used the ADD option in QWK. Concord informs the user also about the adjustment of the last read pointer. Line 273 : ^C14,0;QWK setup: Dropping msg area -> @MAREA_NAME@ from user combined boards.^M; Description : Textline shown to the user when he/she used the DROP option in QWK. Line 274 : ^C15,0;An aphorism for today :^M;^C14,0; Description : Textline shown just before an aphorism is shown. Line 275 : ^C15,0;^M;Press ENTER to continue.^A;^M; Description : Textline to inform the user that ENTER needs to be pressed. This line is used after showing the aphorism. Line 276 : ^C13,0;Forwarding message....^M; Description : Line shown when Concord is forwarding a message. Line 277 : * Originally by @MSG_FROM@^M;-> * Originally to @MSG_TO@^M;-> * Originally dated on @MSG_DATE@^M;^M; Description : Header of the message that is being forwarded, so people can see that it has been forwarded. Line 278 : ^C13,0;Editing message....^M; Description : Textline shown when the user selects the Edit message option in the mail reading menu. Line 279 : ^C14,0;Do you want to change message -> from @MAREA_NAME@? (~1Y/~@n) ^W;^M; Description : Line used when Concord asks the user who selected to edit a message if he/she wants to change the area. Line 280 : ^C14,0;Do you want to edit message text -> (~1Y/~2n) ^W;^M; Description : Textline used when Concord asks the user if he/she wants to edit the text in the message, when selecting the edit text menu option. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 51 | Line 281 : ^C14,0;^E1;Thanks for using Concord -> | multinode chat.^M; | Description : Shown to the user when he/she leaves the | multi node chat. | | Line 282 : ^C14,0;/HELP = Help screen /QUIT = Exit -> | chat /JOIN = Join channel^M; | Description : Information line at the bottom of the chat | screen, telling the user which commands are | available. | | Line 283 : ^C7.0;<~1C>ontinue or <~2R>eply to -> | message? ^W;^M; | Description : Line used by Concord to ask the user if | he/she wants to reply to the message that | has been send to the user. | | Line 284 : ^C14,0;Detected terminal emulation -> | @EMULATION2@ differs from your old -> | settings. Keep it? (~1Y/~2n) ^W;^M; | Description : Line used when Concord is allowed to detect | the terminal emulation when a user is login | in and this terminal emulation is not the | same as the one stated in the users record | in the userbase. | | Line 285 : ^C14,0;Copying flagged files to temp -> | directory. Please hold on...^M; | Description : Used by Concord when copying flagged files | to the temporary directory. | | Line 286 : ^C14,0;^E1; # Group Name -> | CP Total msgs New Personal^M; | Description : When showing the message area statistics, | this line is used as the header. | | Line 287 : ^C7,0;@MAREA_NUM@:04 ^C9,0;@MAREA_-> | GROUP@.03 ^C15,0;@MAREA_NAME@.25 -> | ^C10,0;@MAREA_COMB@:01@MAREA_PKT@:01 -> | ^C11,0;@MAREA_MAX@:10 ^C12,0;@MAREA_-> | NEW@:07 ^C13,0;@MAREA_PERS@:08^M; | Description : Macro command line used to display the | message area statistics. See chapter 5 for | an explanation of all codes. | | Line 288 : ^C14,0;Total of %1 new messages (of which -> | %2 personal messages).^M;Press Enter to -> | continue.^A;^M; | Description : Bottom line of the message area statistics | with the totals of the information and the | number of personal messages. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 52 | Line 289 : available | Description : Displayed when Concord needs to display | 'Available'. | | Line 290 : not available | Description : Displayed when Concord needs to display 'Not | available'. | | Line 291 : ^C15,0;Message unmarked...^P;^M; | Description : When Concord has to unmark a message, this | line is displayed. | | Line 292 : 015;^C15,1; %1 | Description : This is the fullscreenchat Sysop line, where | the name of the Sysop (or Co-Sysop) is | displayed, %1 is replaced by the name. | | Line 293 : 014;^C15,1; @NAME@.35 Time:-> | Mins: | Description : This is the userline in the fullscreenchat. | It states the username and the time left | online. | | Line 294 : 60,2,31;72,2,31;018,002,025,023,026,007,001 | Description : These are the keys available in the | fullscreenchat window. Here is an | explanation of the different numbers: | | - 1st field (60) | | Horizontal position of the chat clock. | | - 2nd field (2) | | Vertical position of the chat clock. | | - 3rd field (31) | | Colour of the chatclock. In this case | it is white on blue. | | - 4th field (72) | | Horizontal position of the minutes | chatted timer. | | - 5th field (2) | | Vertical position of the minutes | chatted timer. | | - 6th field (31) | | Colour of the minutes chatted timer. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 53 | - 7th field (018) | | Code for the key that redraws the | screen. By default this is Ctrl-R. | | - 8th field (002) | | Code for the key that is the backscroll | key. By default this is the Ctrl-B key. | | - 9th field (025) | | Code for the key that is the delete | line key. By default this is the Ctrl-Y | key. | | - 10th key (023) | | Code for the key that is the clear | window key. By default this is the | Ctrl-W key. | | - 11th key (026) | | Code for the key that is the end chat | key. By default this is the Ctrl-Z key. | | - 12th key (007) | | Code for the key that is the Beep key. | It generates a beep tone. By default | this is the Ctrl-G key. | | - 13th key (001) | | Code for the key that allows the Sysop | to show a file to the user. This key | only works on the Sysop side. By | default this is the Ctrl-A key. | | See the appendixes for a list of all | available keyboard codes. | | Line 295 : ^E1;^C14,0;Type /HELP in the beginning of -> | the line to get editor help.^M;^C13,0;# -> | (------------------------------------------> | --------------------------------)^M; | Description : Top line of the internal editor for Concord. | | Line 296 : %1:04 %2^E3; | Description : Line used by Concord to display the textline | in the internal editor. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 54 | Line 297 : ^X-5;^C14,0;~2A^C15;bort -> | ^C14;~1C^C15;ontinue ^C14;~3D^C15;isplay -> | ^C14;~4E^C15;dit ^C14;~5H^C15;elp ^C14;-> | ~6I^C15;nsert ^C14;~7K^C15;ill -> | ^C14;~8M^C15;ove ^C14;~9Q^C15;uote -> | ^C14;~AR^C15;edraw ^C14;~BS^C15;ave -> | ^C7;[^C14;C^C7;] : ^W;^M; | Description : Line displayed in the internal editor when | the / key is pressed at the beginning of the | line. | | Line 298 : ^C11,0;Do you want to abort this message? -> | (~1y/~2N) ^W;^M; | Description : Displayed in the internal editor when the | abort command is used. | | Line 299 : ^C11,0;Edit line number : -> | ^C14,1;^L4;^C11,0;^M; | Description : Displayed in the internal editor when the | edit command is used. | | Line 300 : ^C11,0;Where to insert line (Empty = End -> | of message) : ^C14,1;^L4;^C11,0;^M; | Description : Displayed in the internal editor when the | insert command is used. | | Line 301 : ^C11,0;Which line(s) to kill? (Empty = -> | Nothing)^M; | Description : Displayed in the internal editor when the | kill command is used. | | Line 302 : ^C11,0;Which line(s) to move? (Empty = -> | Nothing)^M; | Description : Displayed in the internal editor when the | move command is used. | | Line 303 : ^C11,0;Which line(s) to quote? (Empty = -> | Nothing, /? = View original text)^M; | Description : Displayed in the internal editor when the | quote command is used. | | Line 304 : ^C11,0;From line : ^C14,1;^L4;^C11,0;^M; | Description : Used in the internal editor when Concord | needs to now from which line to start with | the specified action. | | Line 305 : ^C11,0;To line : ^C14,1;^L4;^C11,0;^M; | Description : Used in the internal editor when Concord | needs to know until what line to perform the | requested action. | | Line 306 : ^C11,0;Save message? (~1Y/~2n) ^W;^M; | Description : Used in the internal editor when the save | option is used. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 55 | Line 307 : ^C11,0;Where to move lines (Empty = End -> | of message) : ^C14,1;^L4;^C11,0;^M; | Description : Used in the internal editor when Concord | needs to know where to move the line(s). | | Line 308 : ^C11,0;Display text from line : -> | ^C14,1;^L4;^C11,0;^M; | Description : Displayed when Concord needs to know which | lines to display in the internal editor. | | Line 309 : 07,219,220;^C14,0;^E1;^C14,1; Concord -> | BBS system users age statistics -> | histogram^E3;^C14,0;^M;^M;Listing %1 -> | users with an average age of %4.04 -> | years.^M;^C15,0;%3^M;^C7,0; | Description : Line used by Concord in the age statistics | diagram as a header. | | Line 310 : ^C7,0; ^C13,0;%1^M; | Description : Line used to display the ages. | | Line 311 : ^C7,0;Extended ASCII displayed here^M; -> | ^C14,0;Age -> - 07 10 13 16 19 22 25 28 -> | 31 34 37 40 43 46 49 52 55 58 61 64 67 -> | 70+^M;^C15,0;Press ENTER to continue.^A;^M; | Description : Line used in the age statistics diagram as | the age lines and the bottom line. (Extended | ASCII has been removed from this line.) | | Line 312 : ^C12,0;Do you want to pack messages -> | prepared so far? (~2Y/~1n) ^W;^M; | Description : When the scanning for offline mail is | aborted, Concord will ask if the already | prepared mail can be packed into an archive. | | Line 313 : %1 Offline message packet (%2 messages)^M; | Description : Used in the offline mail packet generation. | | Line 314 : ^C15,0;Enter filename(s) to erase in -> | local file attach path : -> | ^C14,1;^L12;^C15,0;^M; | Description : Shown by Concord when the program needs to | know which file(s) to erase from the local | attach path. | | Line 315 : ^C15,0;Erase ALL files attached to you? -> | (~1Y/~2n) ^W;^M; | Description : Used by Concord when the program needs to | know if all local attach files to you need | to be erased. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 56 | Line 316 : ^C14,0;Attach file(s) to whom (?=List) : -> | ^C15,1;^L35;^C14,0;^M; | Description : Shown when Concord asks for whom the local | attach file is. | | Line 317 : ^C14,0;Hold on, packing new files list...^M; | Description : Line used when Concord is packing the new | files list. | | Line 318 : 01,Y,Y,Y;^C14,0;@VOTE_NUM@:05@VOTE_NEW@ -> | @VOTE_QUESTION@.53 @VOTE_DATE@.08 @VOTE_-> | USERSTATUS@.09^E3;^M; | Description : Line used by Concord to display the vote | questions. This is the default line. | | Line 319 : 01,79,014,112;@VOTE_NUM@:05@VOTE_NEW@ -> | @VOTE_QUESTION@.53 @VOTE_DATE@.08 @VOTE_-> | USERSTATUS@.09^E3; | Description : Line used by Concord to display the inverse | bar in the vote selection screen. This line | is used in combination with line 317. | | Line 320 : 013,032,081,063 | Description : These are the key codes generated by the | keyboard for the various functions in the | vote selection screen. If you want to use | different keys for the options, this is | where you change them. A list of scan codes | can be found in your printer or MS-Dos | manual. Appendix B lists the scan codes for | the keys that are normally not listed in | your printer or MS-Dos manual. The keys are | listed in the order they are in, the default | is entered in brackets: | | - 1st field (013) | | This field selects the question. By | default it is the RETURN key. Key code | 013. | | - 2nd field (032) | | This field executes the question for | searching for a string. By default this | is the SPACE. Key code 032. | | - 3rd field (081) | | This field quits the area selection and | returns you to the area you were in | when you selected the vote selection | option. By default the Q key. Key code | 081. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 57 | - 4th field (063) | | This field brings up the help screen. | By default this is the ? key. Key code | 063. | | | Line 321 : 04;^C13,1; Enter search string : ^E3;^L20; | Description : Question that is shown when you use the | string search option in the vote selection | screen. | | Line 322 : 04;^C13,1; Enter record number : ^E3;^L5; | Description : Question that is shown when you want to | select a vote by entering the number. | | Line 323 : ^G1,1;^C15,1; NUM VOTE QUESTION -> | DATE -> | YOUR VOTE^E3;^C15,0;^M;^E3;^M; | Description : Top line of the screen where the votes are | displayed. | | Line 324 : ^C15,0;^E3;^M;^C15,1; Press ENTER or -> | number to vote, SPACE to find question or -> | Q to cancel.^E3; | Description : Bottom line of the screen where the votes | are displayed. | | Line 325 : *; ; | Description : The first character is the character to | display that the vote is new, the second is | the character displayed if the vote is old. | The ; characters are not counted. | | Line 326 : Voted | Description : Displayed when you voted on this question. | | Line 327 : Not voted | Description : Displayed when you did not vote on this | question. | | Line 328 : Private | Description : This is displayed when the macro @MSG_PRIV@ | is shown in Concord and the message is | private. Otherwise Line 329 is displayed. | | Line 329 : Public | Description : See line 328. | | Line 330 : ^C14,0;Listing local attach files :^M; | Description : Displayed at the top of the list of the | local attach files. | ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 58 | Line 331 : ^C15,0;^E1;^C15,1; Concord Vote System / -> | Add Question^E3;^C14,0;^M;^M; Enter -> | question %1 :^M;^M; | Description : Line displayed at the top where you can | enter a new vote question. | | Line 332 : ^C14,1; ^L78;^C14,0;^M; | Description : Line used to enter the new vote question. | | Line 333 : ^C14,0;^M; Now give the possible vote -> | selections (empty line to end) :^M;^M; | Description : Used when Concord needs to know the answers | to the vote question. | | Line 334 : ^C11,0; %1) ^C14,1;^L60;^C14,0;^M; | Description : Line used to enter the vote answers for the | vote question. | | Line 335 : ^C14,0;^M; Do you want to allow users to -> | share points to these selections? (~1y/-> | ~2N) ^W;^M; | Description : Shown when Concord needs to know if there is | more then one answer possible to the vote | question. | | Line 336 : ^C14,0; ... How many points? (1-100) -> | ^C14,1;^L3;^C14,0;^M; | Description : Displayed when Concord needs to know how | many points can be given in total to all | answers of the vote question. | | Line 337 : ^C14,0; ... To how many selections can -> | user share points? (Empty = All) -> | ^C14,1;^L2;^C14,0;^M; | Description : Question so Concord will know to how many | answers the user can give points. | | Line 338 : ^C14,0; Can user add more selections? -> | (~1y/~2N) ^W;^M; | Description : Question of the user can add more answers or | not to a vote question. | | Line 339 : ^C14,0; Can user change his vote later? -> | (~1y/~2N) ^W;^M; | Description : Question if the user can change his/her vote | later. | | Line 340 : ^C14,0; Can user look at vote results -> | before voting? (~1y/~2N) ^W;^M; | Description : Question if the user can have a look at the | results on the answers before voting | him/herself. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 59 | Line 341 : ^C14,0; Do you want to save this vote -> | question? (~1Y/~2n) ^W;^M; | Description : Does the vote question needs to be saved or | not. | | Line 342 : ^C15,0; Saved.^M; | Description : Confirmation that the question is saved. | | Line 343 : ^C15,0; Not saved.^M; | Description : Confirmation that the question was not | saved. | | Line 344 : ^C12,0; Are you sure to abort? (~1y/~2N) -> | ^W;^M; | Description : Question from Concord if you are sure to | abort the vote question. | | Line 345 : ^C15,0;^E1;^C15,1; Concord Vote -> | System^E3;^C14,0;^M;^M; | Description : Line shown at the top of the screen where | the user can vote on the question selected. | | Line 346 : ^C14,0; Question @VOTE_NUM@ by -> | @VOTE_ADDEDBY@ on @VOTE_DATE@ :^M;^M;-> | ^C13,0; @VOTE_QUESTION@^M;^M;^C15,0; -> | @VOTE_USERS@ users voted so far.^M;^M; | Description : Information about the vote question. | | Line 347 : ^C14,0; Possible votes are :^M; | Description : Line used above the possible answers to the | vote question. | | Line 348 : ^C11,0; %1) ^C12,0;%2.60 %3^M; | Description : Line used to display the answers to the vote | question. | | Line 349 : ^C14,0;^M; Your vote : %1^M;^M; | Description : Line used when you vote. | | Line 350 : ^C14,0;^M; You have %1 points left.^M;^M; | Description : Line used when voting to display the number | of points left to give away. | | Line 351 : R;D;A;Q;?;^C15,0; Select vote by entering -> | the selection number.^M; Enter (R) to see -> | results before voting, (D) to delete this -> | question,^M; (A) to add new -> | selection or (Q) to go back to questions :-> | ^C14,1;^L2;^C14,0;^M;^M; | Description : Possible answers which can be given to the | vote question. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 60 | Line 352 : %1:02 points. | Description : Used when voting with points to display the | number of points given. | | Line 353 : Selected. | Description : Line used in the voting to display the | answer you voted for. | | Line 354 : ^C12,0; Are you sure to delete this -> | question? (~1y/~2N) ^W;^M; | Description : Question displayed before a vote question is | deleted. | | Line 355 : ^C15,0; Returning back to vote questions. -> | Do you wish to see vote results? (~1Y/~2n)-> | ^W;^M; | Description : Line displayed when the user selected to | return to the vote selection menu. | | Line 356 : ^C15,0; How many points do you want to -> | give for number %1 (%3 points left) ? -> | ^C14,1;^L3;^C15,0;^M; | Description : Line displayed when voting with points. | | Line 357 : ^C15,0; %1 points given. You have %2 -> | points left.^M; | Description : Used after you gave points to an answer. | | Line 358 : ^C15,0; Number %1 (%2) selected.^M; | Description : Used when you made a selection from the | possible answers. | | Line 359 : ^C15,0;^E1;^C15,1; Concord Vote System -> | / Results^E3;^C14,0;^M;^M; | Description : Line used as a header above the voting | results. | | Line 360 : ^C13,0; # Vote -> | Yours Others-> | ^M;^M; | Description : Line used above the results of the votes. | | Line 361 : ^C11,0;%1:02) %2.45 %3.12 %4:06 %5:06^M; | Description : Line used by Concord to display the voting | results. | | Line 362 : ^C15,0;^M; Total : -> | %1:06^M;-> | ^M; Press Enter to continue.^A;^M; | Description : Line displayed below the vote results, | stating the total number of votes. | ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 61 | Line 363 : ^C15,0; Add new vote selection (Enter -> | to discard) : ^M;^C14,1;^L60;^C15,0;^M;^M; | Description : Line used by Concord when the user can add | a new vote selection to the current | question. | | Line 364 : ^C14,0;Do you wish to get a receipt when -> | the recipient gets your message? (~1y/~2N)-> | ^W;^M; | Description : Line used by Concord to ask the user if | he/she wants to receive a message when | sending mail and this mail is received by | the addressee. | | Line 365 : ^C12,0;You cannot share points to any -> | more selections. Press Enter.^A;^M; | Description : Line displayed by Concord when you have | shared all your available voting points. | | Line 366 : ^C12,0;You cannot change your vote for -> | this question. Press Enter.^A;^M; | Description : Line displayed by Concord when the user | wants to change his/her vote, but this is | not possible. | | Line 367 : ^C12,0;You cannot preview results before -> | voting. Press Enter.^A;^M; | Description : Used when the user cannot see the voting | results before voting him/herself. | | Line 368 : ^C12,0;You cannot delete this question. -> | Press Enter.^A;^M; | Description : Used by Concord when a user wants to delete | a vote question he/she did not write. (The | Sysop can delete questions even if he/she | did not write the question.) | | Line 369 : ^C12,0;You cannot add new selections for -> | this question. Press Enter.^A;^M; | Description : Line displayed when a user wants to add | answers to a vote question but is not | allowed to. | | Line 370 : ^C14,0;^E1; | Description : This line clears the screen. This line is | used after the more prompt. If you don't | want the screen to be cleared, clear this | line. | | Line 371 : ^C12,0;Do you really want to abort setting | areas? (~1Y/~2n) ^W;^M; | Description : Used when Concord asks the user if he/she | really wants to stop. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 62 | Line 372 : ^C14,0;^X-80;File @TRUE_FILE_NAME@ found -> | from area @FAREA_NAME@.35 | Description : Used when a file was found and Concord | displays where it was found. | | Line 373 : | Description : Currently an empty line. | | Line 374 : | Description : Currently an empty line. 3.5 File listings ----------------------------------------------------------------- Ever wanted a BBS system where you could define how your file listings looked like? Well Concord allows you to define your own file listings. We've got three for you defined, but others can be added easily. You can change the things displayed, the colours used to display the text and more. Here's the explanation of the textlines in the language file: Line : --- Description : This line marks the beginning of the file list types. Do NOT edit! The --- defines a next selectable subject. Line : 8 Description : Number of lines that define one file list type. This means that all file list types are taking up 8 lines in the following section. Line : ### SHORT FILE LIST .........//....... Description : Name of the first file list type. The ### in the LNG file defines a next string list. Now for the lines that make up the filelist. I've taken the short file list as example, but you can change, add, remove file lists as you like. The structure is always the same. Line 1 : Short file list | Description : Name of the file list type. This line should | not contain any special codes, but should be | plain ASCII. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 63 Line 2 : ^C12,0;@FILE_TAGGED@ ^C14,0;@FILE_NAME-> _EXT@^C11,0;@FILE_SIZE_KB@:04^C7,0;k -> ^C10,0;@FILE_DATE_SMALL@ ^C7,0;^C13,0;-> @FILE_DLCOUNT@:02^C7,0 ^C15,0;-> @FILE_DESC@.47^M; Description : This is the main line in the list. It contains the filename, size, date, download counter and the start of the file description, everything in different colours. Line 3 : ^C15,0; -> @FILE_DESC@.47^M; Description : This line is used to display the remaining of the description. The first bit is shown in line 2, up to 47 characters, and then this line is used as often as needed to display the rest of the description. Line 4 : ^C13,0;@FILE_TEXTLINE@^M; Description : Line used to display a textline from the FILES.BBS file, ie. a line with no filename and not belonging to a description. Line 5 : ^C14,0; @FILE_NAME_EXT@ ^C8,0;-> OFFLINE ^C15,0;@FILE_DESC@.47^M; Description : Textline used by Concord instead of line 2 when the file is missing ie. the description is in the file list but the file is not on the drive itself. Line 6 : ^C12,0;@FILE_TAGGED@ ^C15,1;-> @FILE_NAME_EXT@ Description : Line used by Concord to display the cursorline in the filelist. This marks the currently active line in the filelist. This called the cursor ON line. The line has to use the same outline as line 2, since this line is projected on top of line to, to mark it as active. Only the tag mark and the filename are needed. Line 7 : ^C12,0;@FILE_TAGGED@ ^C14,0;-> @FILE_NAME_EXT@ Description : Line used by Concord to restore the display to normal after the cursorline in the filelist has been displayed. This restores the colours to the normal display as in line 2. This called the cursor OFF line. The line has to use the same outline as line 6, since this line is projected on top of line to, to mark it as non active. Only the tag mark and the filename are needed. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 64 Line 8 : ^C10,1;#^CP,P; Description : Used by Concord to highlight the 'searchword' in the filelist. Used when the user is searching files on keyword or filename. 3.6 Mail read listings ----------------------------------------------------------------- Ever wanted a BBS system where you could define how your mail read listings looked like? Well Concord allows you to define your own listings. We've got two for you defined, but others can be added easily. You can change the things displayed, the colours used to display the text and more. Here's the explanation of the textlines in the language file: Line : --- Description : This line marks the beginning of the mail read list types. Do NOT edit! The --- defines a next selectable subject. Line : 14 Description : Number of lines that define one mail read list type. This means that all mail read list types are taking up 14 lines in the following section. Line : ### SHORT READ MSG .........//....... Description : Name of the first file list type. The ### in the LNG file defines a next string list. Now for the lines that make up the mail read list. I've taken the short read messages list as example, but you can change, add, remove lists as you like. The structure is always the same. Line 1 : Fast read msg | Description : Description of the read list. This line | should not contain any special codes, but | should be plain ASCII. Line 2 : 04;00;02;10;11;07;-;+;Q;D;U;C;A;-> P;N;S;J;H;M;G;R;W;/;K;#;=;F;E;T;);L Description : This line contains the information for the more prompt and the possible options. If you want a different key for a different action, this is the place where you make the changes. Here's an explanation: - Field 1 (04) Number of lines used as a header while reading messages. This can be a maximum of 5 lines. In this case it is 4 lines. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 65 - Field 2 (00) - Field 3 (02) Number of lines used as a footer while reading messages. This can be a maximum of 5 lines. In this case it is 2 lines. - Field 4 (10) Text colour used to display the message. This colour is used to display the normal text. Quoted text is shown in the colour specified in field 5. (See below) - Field 5 (11) Quote text colour used to display the quotes in a message. - Field 6 (07) Colour used to display the origin line in the messages. - Field 7 (-) Previous reply key. Find previous reply in message chain. - Field 8 (+) Next reply key. Find next reply in message chain. - Field 9 (Q) Quit reading replies. Stop reading messages in reply chain and return to original message. - Field 10 (D) Page Down. Display previous page of the current message. - Field 11 (U) Page Up. Display next page of the current message. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 66 - Field 12 (C) Continuous. Read message without stopping when end of page has been reached. - Field 13 (A) Again. Read current message again. - Field 14 (P) Previous message. Read the previous message in the message list. Note the difference with field 7. - Field 15 (N) Next message. Read the next message in the message list. Note the difference with field 8. - Field 16 (S) Stop reading. Stop reading messages and return to menu. Note the difference with field 9. - Field 17 (J) Jump to message. Jump to a message number in the current area. Concord will ask to which message number to jump. - Field 18 (H) Help. Displays the help file READMSG.ANS. - Field 19 (M) Mark message. Mark a message so you can read it later. - Field 20 (G) Goto area. Change message area. - Field 21 (R) Reply. Reply to the current message. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 67 - Field 22 (W) Write new message. Write a new message in the current area. - Field 23 (/) Find message. Search for a message in the current area. - Field 24 (K) Keep unread. Do not mark this message as read. Normally a message read by the addressee is marked as received. this option allows you to remove that status. - Field 25 (#) Delete. Remove the current message from the system. Concord will ask if you are sure to remove the message. - Field 26 (=) Toggle private/public. This allows you to toggle the private flag on or off for the current message. If it was on it is turned off and the other way around. - Field 27 (F) Forward. Forward the current message to another user and/or another area. - Field 28 (E) Edit. Edit the current message. - Field 29 (T) Toggle pointer. Set last read pointer to the current message in the current area. - Field 30 ()) | Writes message to file EXPORT.TXT. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 68 - Field 31 (L) List messages. Displays a list of the messages in the current area. Remember that you cannot use the same character twice! Line 3 : ^C14,0;^E1; From: ^C15,0;@MSG_FROM@.35 -> ^C15,0;@MSG_NUM@/@MAREA_MAX@ -> (@MAREA_SHORT@)^M; Description : First of the header lines. You can have a maximum of 5 header lines. These lines give the user information about the addressee of the message, the sender, date, subject and other information. Line 4 : ^C14,0; To: ^C15,0;@MSG_TO@.35 -> ^C15,0;@MSG_DATE:08 @MSG_TIME@:05 -> ^C7,0;@MSG_PREVREP@<->@MSG_NEXTREP@ -> ^C13,0;@MSG_RCVD@:01^M; Description : Second line of the header. Line 5 : ^C14,0; Subj: ^C15,0;@MSG_SUBJ@^M; Description : Third line of the header. Line 6 : _____________ //__________________ Description : Fourth line of the header. Line 7 : <empty> Description : Header line number 5. Line 8 : ^C7,0;(%1)^CN,N; Description : Line 9 : ____________ // __________________ Description : First line of the footer. A maximum of 5 footer lines is allowed. These are shown under the message. Line 10 : ^C15,0; Pg^C7;[^C14;D^C7;]^C15;n -> Pg^C7;[^C14;U^C7;]^C15;p -> ^C7;[^C14;P^C7;]^C15;rev -> ^C7;[^C14;N^C7;]^C15;ext -> ^C7;[^C14;R^C7;]^C15;eply -> ^C7;[^C14;J^C7;]^C15;ump -> ^C7;[^C14;S^C7;]^C15;top -> ^C7;[^C14;H^C7;]^C15;elp Description : The second line of the footer. In this example it is the line that displays some of the keys defined in line 2. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 69 Line 11 : <empty> Description : The third line of the footer. Line 12 : <empty> Description : Footer line number 4. Line 13 : <empty> Description : Footer line number 5. Line 14 : ^C10,1;#^CP,P; Description : Line used by Concord to highlight the words found when doing a search. That's it folks. Experiment as much as you want, but remember to make a backup! | 3.7 Updating a language file | ----------------------------------------------------------------- | | During the time you work with Concord you probably make changes | to the language file to reflect your own BBS style. When a new | release is available of Concord, it would be silly to make these | changes again to the new language file, so here is a method of | updating your language file. | | Leave your language file as it is and enter the configuration | program CSETUP. Select CONFIGURATION and then the language file. | Select your language file from the list and goto the end of the | file. All lines added since the last release of Concord will be | empty. Goto the empty line, press ^C, which means that the | default textline will be placed on the line. Now you can make | your adjustments to the new lines and you can than save the file, | compile it and you're ready to run. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 3 - Page 70 Chapter 4 - Menu system ================================================================= 4.1 General information ----------------------------------------------------------------- Menus are the main part of your BBS system. Without a menu your users would not know what to do and where to go, so it is important that you create menus. Concord allows you to create your own menus. There is a default set of menus supplied with this archive, but to personalize your own BBS, you should create your own menus. The menus within Concord consists of two parts. The first part is the screen that is shown to the user. This can be an ASCII, ANSI, AVATAR or RIP screen. The only screen that has to be made is the ANSI screen. To create these screens, you will need an editor, like A3E or Thedraw. Concord has a build in conversion for users who are using ASCII, AVATAR and RIP. However, building special RIP files can enhance your BBS. If Concord finds a textfile with the specified name and a RIP, AVT or ASC extension, it will use this file instead of the screen type conversion build into Concord. So in short, and this is for all textfiles for Concord: - *.ANS files Mandatory - *.ASC files Optional - *.AVT files Optional - *.RIP files Optional The second part of a menu is the configuration part. This can be made in two ways, either an ASCII file or with the use of the menu editor. Both methods are used by Sysops, so it's up to you to choose or maybe use both together. There are several ways of creating a menu structure. The most used one looks like this: ------------- Message areas | Main menu -----|------------ File areas | |------------ Other menu 1 | ------------- Other menu 2 Another method is to group items: Main menu ------------------ Concord files & messages | |------------ General files & messages | |------------ Other area 1 ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 1 Either way, plan your menu structure carefully. Users like a menu structure that is easy to follow. 4.2 Building a menu ----------------------------------------------------------------- Before we have a look at the different menu types, let's see how we can build a menu. First we use the ASCII editor method. Note that you can use more than one menu option with the same execute key. This allows you to perform more than one menu command while the user only has to press 1 key. Concord will execute these commands from top to bottom. Also note that some of the optional data fields are used internally by Concord and can not be used directly by the user without writing a scriptfile to enter some information needed. 4.2.1 ASCII menus ----------------------------------------------------------------- The format for the textfiles is as follows: <Hotkey> <Input> <Cmd> "<Data>" <Sec>,<Bpsrate>,<Age>, <Flag A>,<Flag B>....... Note that the line is split here to fit on the page. Normally this is all on one line! The <> brackets are not typed. Here's an explanation of all fields: Field : Hotkey Description : Key that determines the type of action with this command. There are 4 special keys available: # Automatic menu type. This command is executed automatically when the menu is accessed. You have to use this for menu option which will need to be executed without any user interference, like displaying the menu ANS, ASC, AVT or RIP file. $ Select menu type. This command is used for menu options that are available within Concord by using cursor keys to select an option and then activating the option by pressing ENTER. This key means the action to perform for this menu. This option is always used in conjunction with the following option. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 2 £ Select cursor. The text behind this command is displayed on screen. You will have to use this option 2 times after each $ command. The first is the cursor 'ON' line, the second the cursor 'OFF' line. The pound sign is generated by depressing the ALT key and then wile the ALT key is still pressed, pressing 156 on the numerical part of you keyboard. (£ = Alt-156) % Escape. This means that the ESC key needs to be pressed. In all other cases the hotkey is the same as the next option, the input key. Field : Input Description : Command that defines the key that will execute the menu command. When the user presses this key, the menu command will be executed. This can be any key that is available on the keyboard. Field : Command Description : The code that represents the menu command. See 4.3 for a list of all menu commands. The | $ in front of the menu commands listed below | is not entered when creating ASCII menus. | Appendix C will also list the available menu commands. Field : "Data" Description : Optional data field. Here you specify the optional behaviour to some of the menu commands. See the menu commands for the available commands that you can use in this field. The 'data' has to be entered between "....." to set it apart from the other | options on the textline. Spaces can be used | in this option. Field : SecLvl Description : Security level. This is the security level needed by the user to access this menu option. This level has to be between 0 and 32000. Field : Bpsrate Description : Minimum BPS rate needed to access this menu command. If the user is accessing your system on a lower BPS rate, he/she will not be able to use this menu command. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 3 Field : Age Description : Minimum age needed to access this menu option. If the user is younger than the age specified he/she will not get access to this menu option. Field : Flag A, Flag B..... Description : Flagsetting for this menu command. You can specify up to 80 flags. A1 to A8 up to J1 to J8. Either flag has the option to be ON, OFF or "Don't care". X This means the flag is ON. O This means the flag is OFF. - This means don't care. ON means the user must have this flag set to access the menu option. OFF means the user must not have set this flag and "Don't care" means that it makes no difference if the flag is on or off, the user can access the menu option, providing that the other settings are correct. What you got to do is build your menu line by line, always beginning the menu with an automatic command to display the textfile belonging to the menu. Unless it is a menu that has no textfile, like a completely automatic command menu. Here's a small example of a menu textline: A A 0006 "DATA" 100,,18,XXX---XX,OOO--OOO,--------,,,,,,,,,,,,,, This could also be written as: A A 0006 "DATA" 100,,18,XXX---XX,OOO--OOO | The use of the dollar sign ($) is not needed when entering menu | options in the ASCII menus. This is done to make editing easy. You don't have to enter every comma for all flagsettings if you don't use them. They will all be set to 'Don't care' if they are not entered. Leaving a setting empty also makes it as 'Don't care', like between the 100 and the 18 in the above example. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 4 When done editing your menu, you will need to compile it, so Concord is able to use the menu. This is done by running the GENUTIL.EXE program. Here's the command line: GENUTIL MENU <menu name(s)> The menu name can have wildchars in it to compile more than one menu at the same time. To compile a menu called TOP.TXT you would call GENUTIL like his: GENUTIL MENU TOP.TXT To compile every menu in the menu directory, you would call GENUTIL like this: GENUTIL MENU *.* This will create a compiled menu file with the MNU extension. 4.2.2 Menu editor ----------------------------------------------------------------- The other way of building menus is with the menu editor. This program is called MENUED.EXE. This program will directly create your menus in compiled version. You don't have to compile your menus with GENUTIL anymore. Note that menus that are created using the ASCII file method can be edited with MENUED.EXE after they are compiled with GENUTIL. When MENUED is started, a screen with two boxes is displayed. The top box informs you about the keys that are available The bottom one displays the available menus and the directories. Use the cursor keys to select the menu file you want or the directory you want to change to. Press SPACE or ENTER to open the menu file or change directory. Press N to start a new menu file. This will ask for the menu filename to create. Once you have entered a new filename or selected a existing menu, you will briefly see the ANSI file belonging to that menu and then you are in the edit screen for the menu types. The following keys are available in the menu editor here: Alt-A Add menu line to menu Alt-D Remove line from menu F1 Display Concord manual F2 Display ANSI file belonging to menu ESC Return to edit window ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 5 The arrow keys allow you to move within the menu editor. Pressing Shift-Arrow keys allows you to move a menu line up or down, depending on the arrow key that was pressed. The following fields are available in the menu editor: Field : Key Description : Key that determines the type of action with this command. There are 4 special keys available: # Automatic menu type. This command is executed automatically when the menu is accessed. You have to use this for menu option which will need to be executed without any user interference, like displaying the menu ANS, ASC, AVT or RIP file. This option is displayed as AUT in the key field. $ Select menu type. This command is used for menu options that are available within Concord by using cursor keys to select an option and then activating the option by pressing ENTER. This key means the action to perform for this menu. This option is always used in conjunction with the following option. This option is displayed as SEL in the key field. £ Select cursor. The text behind this command is displayed on screen. You will have to use this option 2 times after each $ command. The first is the cursor 'ON' line, the second the cursor 'OFF' line. The pound sign is generated by depressing the ALT key and then wile the ALT key is still pressed, pressing 156 on the numerical part of you keyboard. (£ = Alt-156) % Escape. This means that the ESC key needs to be pressed. In all other cases the hotkey is the same as the next option, the input key. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 6 Field : Input Description : Command that defines the key that will execute the menu command. When the user presses this key, the menu command will be executed. This can be any key that is available on the keyboard. Automatic commands have the # symbol in this field. Field : Menu type Description : The menutype. Pressing ENTER here will display a menu with all available menu types sorted per group. Here's a short list of which command is in what group. General Goto menu Gosub menu Return from gosub Logoff Show ANSI with hotkeys Show ANSI without hotkeys Show ANSI with ENTER Run script Run external program Exit to OS with errorlevel Yell Sysop Run form Multinode chat BBS list Show BBS list Add BBS to list Change BBS in list Remove BBS from list Verify BBS in list View edit BBS list Download BBS list Check user's BBS Files Show file list Show new files Search on filemask Search on keyword Goto previous file area Goto next file area Select file area Select combined file area View file Unpack files to TEMP directory Pack files in TEMP directory Copy files to TEMP directory List files in TEMP directory >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 7 Erase files in TEMP directory View files in TEMP directory Move files to another area Check tagged files Upload files Download files Set combined file areas | Create new files list | Copy flagged files to temp dir | Check file attaches | Attach file to user | Kill files in attach path Messages Goto previous mail area Goto next mail area Select mail area Select combined mail area | Quickscan messages (3x) | Read messages (3x) Read combined area messages Write message Personal mail scan Read marked messages Download offline mail packet Upload offline mail packet Set combined mail areas Doors Goto previous door Goto next door Select door Run door Others Edit user info Show who is on | Show last callers (2x) Show userlist Set cursor location | Show bulletins (2x) Show last user comment Add last user comment Check user's view file Analyze user screen size Redraw screen Set temp. command line mode Force INCLUDE.MNU off Run SBBS .Q-A file | Show aphorism | Age statistics See chapter 4.3 for a complete list of all menu types and the available options. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 8 Field : Datafield Description : Optional data field. Here you specify the optional behaviour to some of the menu commands. See the menu commands for the available commands that you can use in this field. Field : Sec Description : Security settings for this menu command. Pressing ENTER here will display a window with the following options: Sec. level Level needed to access this menu option. The user must have a security level equal or higher than the level specified here to gain access to the menu option. Flags Flagsettings. Settings needed to gain access to this menu option. Press SPACE to activate the flag edit window. Age Age needed to access this menu option. Bps rate Minimum BPS rate needed to access this menu option. Pressing ESC will bring you back to the normal edit window. When you are done editing, pressing ESC will display the window to confirm if you want to save the menu. | 4.2.3 Creating selection menus | ----------------------------------------------------------------- | | creating selection menus is easier than you think, because | Concord will do all the hard work for you. First design your ANSI | screens for your menus. Create the menus with at least one line, | which displays the ANSI file. When you have done this select the | menu to which you want to add the selection menu options. Concord | will display the ANSI file and then show you the menu list. Press | F2 to display the ANSI screen. Move your cursor to the start of | the selection menu. Press SPACE. Move to the end of the selection | menu and press SPACE again. Now you will see a bar that | represents your menu selection. Press ENTER and Concord will add | three lines to your menu. Change the settings in these lines to | what you want and your selection menu option is done. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 9 4.3 Menu options ----------------------------------------------------------------- Here's a complete list of all available menu options. This list is still expanding, so new menu options might be available in new releases of Concord. The following notation will be used to explain the menu options: Menu number : Number of this menu option. This is the number that you can use in the ASCII method of making menus or in the scriptfiles available with Concord. Although the full number includes a $, I will mostly just talk about a menu option without this character. So if I write menu type 8, I mean menu type $0008. Menu name : Name of this menu option. Description : Description of this menu option and how it behaves. In some cases this can be depending on the optional data options available for the menu type. Data syntax : The format of the optional data line. Mandatory data : List of options for this menu type that needs to be specified. The options mentioned in the Extra options field are optional, the option mentioned in this field, Mandatory data, are mandatory and need to be specified. Extra options : Any extra menu options that can be included in the optional data field, like opening hours etc. These are optional, the options mentioned in the Mandatory data field must be defined. Options in [] brackets are optional. Options in <> brackets have to be replaced by a string. This could be a filename or a searchstring. If you have problems understanding a menu option we suggest you have a look at the included default menus in the Concord archive. If you still have problems, contact one of the support sites. Note that when you use the menu numbers in text and scriptfiles, you are allowed to remove any preceding 0's. So menu option 0003 is the same as 3. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 10 Menu number : $0001 Menu name : MENU_GOTO Description : Changes to the menu specified in the optional data field. This jump is without adding this menu to the stack of menus you've visited. (See menu option 2 for more information about this.) Data syntax : [/THH:MM-HH:MM] [/Ppassword] <menuname> Mandatory data : Name of the menu to jump to, without the .MNU extension. The menu name is the last item on the optional data line. Extra options : /THH:MM-HH:MM Opening and closing hours of this menu option. The first HH:MM is the opening time of this menu option in hours and minutes, the second HH:MM is the closing time in hours and minutes. Use the 24 hour notation method for these fields. /Ppassword The /P option is followed by the password needed to gain access to this menu option. When a password is present, Concord will ask the user for the password. Only if the password is correct will Concord give access. Menu number : $0002 Menu name : MENU_GOSUB Description : Jump to the menu specified in the optional data field and add the menu you jump from to the stack of menus visited. This allows you to use menu command 3 and return from a menu to the previous menu. This is not possible when using menu command 1. Data syntax : See menu 1. Mandatory data : See menu 1. Extra options : See menu 1. Menu number : $0003 menu name : MENU_RETURN Description : Return to previous menu. This command looks in the stack of menus visited and return to the last one entered in that list. If the option is used again without adding a menu to the stack, this menu option will jump to the before last menu option. Data syntax : [/THH:MM-HH:MM] [/Ppassword] [<menuname> / "*"] Mandatory data : Normally you don't have to enter anything here, because Concord jumps back to the last menu in the menu stack. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 11 Extra options : /THH:MM-HH:MM Opening and closing hours of this menu option. The first HH:MM is the opening time of this menu option in hours and minutes, the second HH:MM is the closing time in hours and minutes. Use the 24 hour notation method for these fields. /Ppassword The /P option is followed by the password needed to gain access to this menu option. When a password is present, Concord will ask the user for the password. Only if the password is correct will Concord give access. <menuname> Name of the menu to jump to. "*" Tells Concord to jump to the menu defined as TOP menu. Menu number : $0004 Menu name : MENU_LOGOFF Description : Menu command to leave the BBS and hangup the phone. Data syntax : [/NOHANGUP] [/IMMEDIATE] [/<errorlevel>] | [/RESTORECHANGES] Mandatory data : Normally you use this command without any options. When this menu command is used, Concord will look for a scriptfile called GOODBYE.SCR and execute the commands in this scriptfile. See the chapter about the scriptfiles for more information. Extra options : /NOHANGUP /IMMEDIATE Concord will disconnect immediate, without starting the scriptfile GOODBYE.SCR. /<errorlevel> Concord will exit with the errorlevel specified in the optional data field. This must be the last option on the textline. Your batchfile should intercept this errorlevel and continue. Normally Concord exits with errorlevel 0. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 12 | /RESTORECHANGES | This option allows you not to store the | changes the user made in the userrecord. | Very useful when you have a GUEST account | and don't want your users to keep changing | the options of that account. Menu number : $0005 Menu name : MENU_SHOWHOT Description : Show a textfile with hotkeys available. This option is mostly used to display the ANSI file belonging to the menu file. This menu type allows the user to press a key defined in the menu before the whole ANSI file is displayed. Menu type 8 will first display the file and than look if the user pressed a key or not, while this menu type will do so during the display also. Displaying the file depends on the settings from the user. If the user has RIP turned on and there is a file with the correct name and a RIP extension, this file is used instead of the ANSI file. Data syntax : <filename> Mandatory data : You will have to enter the filename to display. Do not enter the extension, unless you want only to display the file specified. You can use the filename only or use a complete path and filename. If only the filename is given, Concord will search the default text path and the main directory for the file. Extra options : None Menu number : $0006 Menu name : MENU_SCRIPT Description : Run a Concord script file. These files can contain almost all available menu commands and script file commands and are very powerful. See the chapter on scriptfiles for more information about the commands available. Note that the script file mentioned here is a Concord scriptfile, not a SuperBBS .Q-A file. | Data syntax : <scriptfile name> [/JUMP:Label] [Scriptpar.] Mandatory data : Name of the scriptfile to run. The .SCR extension is not needed. | Extra options : /JUMP:Label | Label in the scriptfile to jump to. This | allows you to use one big scriptfile and | jump to a part of the scriptfile you need | using labels. This works the same as the | GOTO command in the script language. | >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 13 | [Scriptparameters] | Script parameters can be used with: | | PARAM variable = type | | command just as in the goto/gosub menutypes. Menu number : $0007 Menu name : MENU_EDIT Description : This menu commands allows you to edit the user information. Data syntax : <Command> Mandatory data : Name of the item to edit. Some of these commands need extra text lines added in the optional data field, some work without extra textlines. This is noted with every option. Command can be one of the following options, in alphabetical order: | ADDRESS | Allows you to change the address which is | contained in the userlist. ALIAS Allows the user to change the alias of | his/her userrecord. No text line needed. BULLETCHK Allows the user to toggle bulletin check on or off. This is a Yes/No field. CHARSET Allows the user to select another character | set. No text line needed. CITY Allows the user to change the city of | his/her userrecord. No text line needed. COLORS Allows the user to toggle colors on and off. This is a Yes/No field. DATA Allows the user to change the DATA phone | number of his/her userrecord. No text line | needed. EDITOR Allows the user to select a default full | screen editor. No text line needed. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 14 FILECHK Allows the user to toggle the filecheck on or off. This is a Yes/No field. HOTKEYS Allows the user to toggle hotkeys on or off. This is a Yes/No field. LANGUAGE Allows the user to change the language used. | No text line needed. MAILCHK Allows the user to toggle mailcheck on or off. This is a Yes/No field. | OFFLINEFORMAT | Allows you to change the offline mail | format. PACKER Allows the user to select a default | archiver. No text line needed. PASSWORD Allows the user to change the password of | his/her userrecord. No text line needed. PKT_ALLPERSONAL Allows the user to toggle the setting about receiving mail to ALL as personal on or off. This is a Yes/No question. PKT_GOODBYE Allows the user to toggle the inclusion of the file GOODBYE.ANS in the offline mail packet on or off. This is a Yes/No field. PKT_LASTREAD Allows the user to toggle the inclusion of the last read pointer file in the offline mail packet on or off. This is a Yes/No field. PKT_MARKREAD Allows the user to toggle the setting about marking all personal mail as received in the offline mail packet. This is a Yes/No field. PKT_MAXMSGS Allows the user to change the number of messages in the offline mail packet. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 15 PKT_NEWBULLETS Allows the user to toggle the inclusion of the new bulletins in the offline mail packet on or off. This is a Yes/No field. PKT_NEWFILES Allows the user to toggle the inclusion of the new files list in the offline mail packet on or off. This is a Yes/No field. PKT_NEWS Allows the user to toggle the inclusion of the file NEWS.ANS in the offline mail packet on or off. This is a Yes/No field. PKT_NOOWNMSGS Allows the user to toggle the option for receiving own mail in the offline mail packets on or off. This is a Yes/No field. PKT_OFFLINE Allows the user to change the type of offline mail packets. PKT_WELCOME Allows the user to toggle the inclusion of the file WELCOME.ANS in the offline mail packet on or off. This is a Yes/No field. PROTOCOL Allows the user to select a default protocol. SCREENLEN Allows the user to change the screenlength he/she is using. VOICE Allows the user to change the VOICE phone number of his/her userrecord You can only use one command per menu line. Not all of these commands react the same, some might display a list to choose from, others need some more work. See the default menus for an example. Extra options : None. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 16 Menu number : $0008 Menu name : MENU_SHOWFILE Description : Display a textfile to the user. This can be an ASCII, ANSI, AVT (Avatar) or RIP file, depending on the type of emulation used by the user. This command does not monitor key presses during display of the file, as menu command 5 does. Use this command to display normal files and use menu command 5 to display menu textfiles. Data syntax : <filename> Mandatory data : You will have to enter the filename to display. Do not enter the extension, unless you want only to display the file specified. You can use the filename only or use a complete path and filename. If only the filename is given, Concord will search the default text path and the main directory for the file. Extra options : None Menu number : $0009 Menu name : MENU_EXEC Description : Menu command to execute external programs, like utilities. Concord will swap to DOS and execute the program specified. You can use several options to specify how Concord should behave. When the external program is finished, Concord reloads and displays the menu again. Data syntax : <filename> [<parameters>] [<options>] Mandatory data : Filename of the program to run. This can be a filename only, but we suggest that you always use the full path, so Concord will execute the correct program. Extra options : <parameters> Parameters needed to run the external program. This depends on the program that you want to run. See the manual from the program for more information about this. <options> These are options to control Concord's behaviour when shelling to DOS. The following options are available: *B Replaced by the current BPS rate. *C Replaced by the current COMSPEC settings. The COMSPEC is your path and filename of your command.com file. *D1- Informs Concord NOT to create a DORINFOx.DEF file. This file is needed by some external programs to receive user information. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 17 *D2- Informs Concord NOT to create a DOOR.SYS file. This file is needed by some programs to receive user information. *D3- Informs Concord NOT to create an EXITINFO.BBS file. This file is needed by some programs to receive user information. *E- Informs Concord NOT to create an EXITINFO.DAT file. This file is needed by some programs to receive user information and is a special Concord file which allows more info to be send to the external program than the normal EXITINFO.BBS file. *F Replaced by user's FIRST name. *G Replaced by user's colour mode. *J Replaced by user's screen length. *L Replaced by user's LAST name. *N Replaced by current node. *P Replaced by current COM port. *R Replaced by user's record number in the userlist. *S Number of kilobytes to swap. This command takes a parameter in the following format: *S<minmemkb>, which is the amount in Kilobytes of the memory to swap. *T Replaced by user's time left in minutes. These options allow you to influence the way Concord and the external program will behave. Concord is capable of creating a DORINFOx.DEF, DOOR.SYS, EXITINFO.BBS and EXITINFO.DAT file. So any program that uses any of these files can be used with Concord. | Please note that some commands might need | menu option 19 (See below) to clear the | screen after making a selection. Menu number : $000A Menu name : MENU_ERRLVL Description : Exits to the main batchfile with the errorlevel specified in the optional data field. When Concord is reloaded with -R option, it returns to the menu where you started the menu option from. This option removes Concord completely from memory until it is restarted. Data syntax : [*D1-] [*D2-] <errorlevel> >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 18 Mandatory data : You will have to specify the errorlevel that Concord will be exiting with. Do not use errorlevels below 10 as these are used for program errors and other actions from Concord. Extra option : *D1- Informs Concord NOT to create a DORINFOx.DEF file. This file is needed by some external programs to receive user information. *D2- Informs Concord NOT to create a DOOR.SYS file. This file is needed by some programs to receive user information. Note that with this menu option not all exit options are available as in menu type 9. Menu number : $000B Menu name : MENU_YELL Description : Menu command to page the Sysop for a chat. Concord will use the sound device configured in the configuration program to warn the Sysop that somebody wants to talk to him/her. Data syntax : [/FORCED] [<defaultpagereason> Mandatory data : None Extra options : /FORCED This option allows the chat function to be active, even if the page times specified in the configuration program say that paging hours are over. This could be handy for certain users, like a Co-Sysop, so he/she might be able to page you even outside page hours. <defaultpagereason> When a default page reason is defined, Concord will use this as the reason for the page. If this option is not used, Concord will ask the user what the reason for the page is. Menu number : $000C Menu name : MENU_WHOISON Description : This menu option displays a list of all users online on all lines or let's you search for a user online. Data syntax : [<searchstring>] Mandatory data : None >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 19 Extra options : <searchstring> Allows you to enter a username to search for in the online users. You can use a scriptfile to ask the user what name to search for and than start the menu option with the given string as the searchstring. Menu number : $000D Menu name : MENU_LASTCALL Description : Shows a list of the last callers to the system. This can be a list of the last x callers or the callers from the current day. Data syntax : [/TODAY] [/<numberoflastcallers>] [<searchstr>] Mandatory data : None Extra options : /TODAY This option allows you to display only the callers that have called the current day. If the user is the first caller, this will be displayed. /<numberoflastcallers> Number of callers to display in the list. By default this is 15. Concord will display the users of more than 1 day if needed to fill the list. <searchstring> Allows you to enter a username to search for in the lastcallers list. You can use a scriptfile to ask the user what name to search for and than start the menu option with the given string as the searchstring. Menu number : $000E Menu name : SHOWUSERS Description : Shows the userlist of the system to the user. This can be done in several ways, depending on the control file. Data syntax : <Listtype> [<searchstr>] Mandatory data : You have to give the listtype as defined in the file LISTS.CTL. This file contains the layout for the list. You can add, delete or change any of the available listtypes. See the chapter on control files for an explanation about the options in the list control file. Extra options : <searchstr> Allows you to enter a username to search for in the userlist. You can use a scriptfile to ask the user what name to search for and than start the menu option with the given string as the searchstring. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 20 Menu number : $000F Menu name : MENU_SHOWBBS Description : Shows the internal BBS list to the user. The user will be able to search for a specific BBS name. Data syntax : [<searchstring>] Mandatory data : None Extra options : <searchstring> Allows you to enter a BBS name to search for in the BBS list. You can use a scriptfile to ask the user what name to search for and than start the menu option with the given string as the searchstring. Menu number : $0010 Menu name : MENU_EDITBBS Description : Menu option to allow the user to change, add, remove or verify the BBS information of his/her BBS. Data syntax : [/ADD] [/CHANGE] [/REMOVE] [/VERIFY] Mandatory data : You can use one of the following options as optional data. Only one command is allowed at a time. Concord uses the BBSLIST?.* files in your main directory to display the information when entering or changing BBS information. /ADD Add a BBS to the list. The user can enter information like BBS name, telephone number, network addresses etc. /CHANGE Change the BBS information. This can only be done by the user who entered the information. /REMOVE Remove a BBS from the BBSlist. This can only be done by the person who entered the information. /VERIFY This option allows the Sysop of the BBS to verify that his/her BBS is still operational. The verify date will be set to the date that is was verified. Concord has the option to automatically, after a certain amount of days, ask the user who entered the information, if the BBS is still operational. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 21 The Sysop of the BBS where the BBS list is on will also have the options to edit, verify, add and remove BBSses from the list. Extra options : None Menu number : $0011 Menu name : MENU_DOWNBBS Description : This menu option allows your users to download the internal BBS list. Data syntax : None Mandatory data : None Extra options : None Menu number : $0012 Menu name : MENU_SETCURSOR Description : Allows you to place the cursor on any location on the screen. The top left hand corner is 0,0. The top right hand corner is 80,0. Bottom left is (with 25 lines on screen) 0,25 and the bottom right is 80,25. You can place the cursor anywhere you want by defining the X and Y location. Data syntax : <x>,<y>[,<string>] Mandatory data : You have to enter the location for the cursor in x,y format. Extra options : <string> String to be displayed at the given cursor location. this string could, for example, be used to display the commandline at the bottom of your menus. Menu number : $0013 Menu name : MENU_CHECKBBS Description : Menu option allowing you to check the date that a BBS owned by the person logging on was verified. If the date is longer ago then the number of days specified in the configuration, the user is asked if the BBS still is operational or that it has to be removed from the list. This helps your internal BBS list keep up to date. Data syntax : None Mandatory data : None Extra options : None Menu number : $0014 Menu name : MENU_CHECKBULL Description : Menu option that displays the bulletin list or searches for new bulletins, depending on the optional data. | Data syntax : [/NEW] [/SHOW] <bulletinname> >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 22 Mandatory data : Name of the control file for the bulletins. This is an ASCII file with the format "Bulletin description" followed by the "Bulletin name". See the example included in the Concord archive for more information. Extra options : /NEW Only shows the bulletins when there are new bulletins since the last check. | /SHOW | Show bulletin file without showing the | bulletinlist first. Menu number : $0015 Menu name : MENU_SHOWENTER Description : Same menu option as menu type 8, only the line "Press ENTER to continue..." is displayed at the end of the file and Concord waits for the user to press ENTER. Data syntax : See menu type 8. Mandatory data : See menu type 8. Extra options : See menu type 8. Menu number : $0016 Menu name : MENU_LASTCMT Description : This menu option has everything to do with the last user comment option in Concord. It allows your user to write a comment and view the comment from the last user. This option is mostly used in the logoff menu, but you are free to change that. Data syntax : [/SHOW] [/NOKILL] [/ADD] [/nn] Mandatory data : At least one of the extra options. Extra options : /SHOW This will display the comment the last user has made. If there is no comment, Concord will do nothing with this menu option. /NOKILL Concord will not kill the last user comment, so it is available to all users until a new one is entered. Normally the comment is cleared after the next user logged off without writing a new comment. The /NOKILL option is used in combination with the /SHOW option. /ADD This option allows the user to write a comment to the next user. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 23 /nn Number of lines that the user comment will be. Normally this is around 5 lines. When no number is given, Concord defaults to 2 lines. Menu number : $0017 Menu name : MENU_USERVFILE Description : This menu option is used to check if the file defined in the userrecord VIEWFILE option is displayed or not. If the setting USER_VIEWED or the setting USER_VIEWONLYONCE are false, the file defined in the current userrecord is shown. If the setting in the USER_DELAFTERVIEW field is true, Concord deletes the file, otherwise it leaves the file as it is. Data syntax : None Mandatory data : None Extra options : None Menu number $0018 is not available for use. Menu number : $0019 Menu name : MENU_REDRAW Description : This menu option allows you to redraw the screen. Normally screen redraws are on, except for menu type 7, where it is off by default. This menu command allows you to turn screenredraws on or off for a certain menu option. This menu command does nothing on it's own, but should be used in combination with another menu command, but with the same execute key. Here's an example: Z Z MENU_EDIT OFFLINEFORMAT Z Z MENU_REDRAW /YES The option can also be used to turn screenredraws off on certain menu commands. Data syntax : [/Yes] [/No] Mandatory data : None Extra options : /Yes Turn screenredraws on for this menu option only. /No Turn screenredraws off for this menu option only. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 24 Menu number : $001A Menu number : MENU_RUNFORM Description : Concord allows you to use a form to enter information. A form is a predefined screen where you can set areas where information is entered. Every form needs a control file, which has the extension FRM. See the chapter on text and control files for more information about forms. Data syntax : <formname> Mandatory data : Name of the form file to use. Extra options : None Menu option : $001B Menu option : MENU_CMDLINE Description : This menu command enters commandline mode for the duration of one single commandline. Normally when hotkeys are active, you can only press one key and the command is executed. But sometimes it might be necessary to enter more than one option. This can be done by using this menu option, which will turn hotkeys off and make it a commandline system until ENTER is pressed. Data syntax : None Mandatory data : None Extra options : None Menu number : $001C Menu name : MENU_NODEFMENU Description : When there is a menu called INCLUDE.MNU, the menu options in this menu are added to every menu in Concord. This allows you to place options which should be available everywhere to the user in this menu. Sometimes it might be necessary that this menu is not used and to allow this, menu option 1C has been defined. This will force Concord not to use the INCLUDE.MNU file if it is found. Use this menu command as an automatic menu option. Data syntax : None Mandatory data : None Extra options : None | Menu number : $001D | Menu name : MENU_MNODECHAT | Description : Menu to start the multi node chat. If you | run a BBS with more than 1 line, you can | have your users chat with each other. | Data syntax : None | Mandatory data : None | Extra options : None ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 25 | Menu number : $001E | Menu name : MENU_SBBS_Q_A | Description : This menu command let's you run your old | SuperBBS Q-A files. Please note that not | options from SuperBBS are supported and that | the scriptfile language from Concord is far | more powerful. | Data syntax : <Filename> | Mandatory data : Name of the Q-A file to execute. | Extra options : None | | Menu number : $001F | Menu name : MENU_APHORISM | Description : This menu command allows you to display a | fortune cookie to your users. Concord uses | a file to read the cookies from and displays | them randomly. | Data syntax : <Filename> | Mandatory data : Name of the aphorism file. This file should | have the following format: | | 3 | Aphorism1 | | Aphorism2 | | Aphorism3 | | Each aphorism is separated with 1 empty line | from the other. The number on the first line | is the number of aphorism in your file. This | number is optional. When used it speeds up | the search in the file, because Concord does | not have to read in the whole file before | selecting an aphorism. | Extra options : None | | Menu number : $0020 | Menu name : MENU_WRITELOG | Description : Menu option to write a textline in the | Concord logfile. | Data syntax : <Textline> | Mandatory data : The line to be written in the logfile. | Extra options : None | | Menu number : $0021 | Menu name : MENU_AGESTAT | Description : This menu command generates a statistics | screen of your users age. | Data syntax : None | Mandatory data : None | Extra options : None ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 26 | Menu number : $0022 | Menu name : MENU_WRITE | Description : Menu command to write a textline on screen. | This could be used to write a prompt on | screen underneath your menus. | Data syntax : <Textline> | Mandatory data : Textline to display on screen. | Extra options : None | | Menu number : $0023 | Menu name : MENU_VOTE | Description : Concord has a build in voting system where | users can add questions and other users can | vote on those questions. This menu option | allows your users to vote on the existing | questions. | Data syntax : None | Mandatory data : None | Extra options : None | | Menu number : $0024 | Menu name : MENU_ADDVOTE | Description : Menu option to add a vote to the voting | system. This menu option is for creating the | vote questions, menu option 23 is for voting | on the questions. | Data syntax : None | Mandatory data : None | Extra options : None | | Menu number : $0025 | Menu name : MENU_QUIT | Description : Menu option which can be used as a remark | line in a menu file. It will not be shown to | the user. See this menu option as the REM | option from DOS. | Data syntax : None | Mandatory data : None | Extra options : None Menu number : $1000 Menu name : MENU_FILELIST Description : This menu option lists the files in the file area. It will display the filelist so the user can see what is available on your system. Data syntax : [/ALL] [/N<MM-DD-YY> [<filemask>] [<keyword>] Mandatory data : When there is no option entered, Concord will display the files in the current area only starting from top to bottom as defined in the FILES.BBS file or the filebase file. Extra options : /ALL All files areas are checked for a match. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 27 /N<MM-DD-YY> Display only files in the current area that are newer than the date specified. The date is in the format: MM Month DD Day YY Year You can use a scriptfile to ask for the date. <filemask> Display only files in the current area that match the given search criteria. You can use a scriptfile to ask for the filemask to search for. All normal DOS wildcards, like * and ?, can be used. <keyword> Display only files in the current area that match the given search criteria. You can use a scriptfile to ask for the keyword to search for. Menu number : $1001 Menu name : MENU_NEWFILES Description : Display new files since the last time the user was on, or since the date specified by the user. Data syntax : [/ALL] [<MM-DD-YY>] Mandatory data : When no optional data is entered, Concord displays the new files in the current area. Extra options : /ALL Display the new files in all available areas, starting at area 1. <MM-DD-YY> Specifies the date to start the search for new files on. Normally this is the date the user was on your system for the last time. Concord displays a question with this last access date as default entered in the answer field. The user can change this if he/she wants to. If for any reason you would want to display a newfiles list with a different date, you can use this option. The date is in the format: MM (= Month) - DD (= Day) - YY (= Year) You can also use a scriptfile to ask for the date. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 28 Menu number : $1002 Menu name : MENU_FILEMASK Description : Menu option to search for a file in your filebase with a given filemask. The filemask can contain any valid DOS wildcards like * and ?. Data syntax : [/ALL] <filemask> Mandatory data : <Filemask> Filemask to search for in the filebase. This option is searching in the current file area only. Extra options : /ALL Normally the search is done only in the current file area. When the /ALL option is used every available area is used for the search. Menu number : $1003 Menu name : MENU_KEYWORD Description : Menu option to search for a word in your filebase with a given keyword. The keyword can be any valid DOS character(s). Data syntax : [/ALL] <keyword> Mandatory data : <keyword> Keyword to search for in the filebase. This option is searching in the current file area only. Found keywords will be highlighted. Extra options : /ALL Normally the search is done only in the current file area. When the /ALL option is used every available area is used for the search. Menu number : $1004 Menu name : MENU_PREVFAREA Description : Menu command to change the current file area to the previous one. If the current area is the first area, the last area is used as the area to jump to. An example: -- 1 <--- 2 <--- 3 <--- 4 <--- 5 <--- 6 <-- | | ------------------------------------------- | Data syntax : [/ALL] [/COMB] [/GROUP=xxx] | Mandatory data : The options on this menu command allows you | to change area within all areas, the | combined areas or within a certain group. | Extra options : /ALL | Use all groups for area change. | | /COMB | Use only areas active as combined areas in | the area change. | >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 29 | /GROUP=xxx | Use only areas that belong to group xxx as | the areas to do the area change in. You can | use this one in combination with the | previous two commands. Menu number : $1005 Menu name : MENU_NEXTFAREA Description : Menu command to change the current file area to the next one. If the current area is the last area, the first area is used as the area to jump to. An example: -> 1 ---> 2 ---> 3 ---> 4 ---> 5 ---> 6 --- | | ------------------------------------------- | Data syntax : [/ALL] [/COMB] [/GROUP=xxx] | Mandatory data : Use only one option at a time, unless you | use the /GROUP option. | Extra options : /ALL | Use all groups for area change. | | /COMB | Use only areas active as combined areas in | the area change. | | /GROUP=xxx | Use only areas that belong to group xxx as | the areas to do the area change in. This | command can be used in combination with the | previous two commands. Menu number : $1006 Menu name : MENU_SELFAREA Description : Menu command to change the file area. Concord will display a list of file areas to select from, unless the file FILEAREA.ANS is found. Data syntax : [/ALL] [/COMBINED] [/NAME=<name>,<name>...] [/GROUP=<group>,<group>...] [/NONE] [/RANGE=<from>..<to>,...] Mandatory data : At least one of the extra option needs to be specified. Extra options : /ALL Displays the selection screen with all available areas. Only areas that match the security of the user will be displayed. /COMBINED Displays the selection screen with all combined areas. This can vary per user, since the user has the option to turn areas on or off. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 30 /NAME=<name>,<name>... Displays the selection screen with all areas that match the name(s) entered on the command line. Note that you can use the Concord macros in this and other fields of the menus. /GROUP=<group>,<group>... Displays the selection screen with all areas belonging to the groups entered on the command line. This allows you to change area within a group. /NONE /RANGE=<from>..<to>,... Displays the selection screen with all areas that are within the range specified on the command line. Menu number : $1007 Menu name : MENU_VIEWFILE Description : View a file that is in the filelist. This menu option allows you to view a file. If the file is an archive, the archive contents is shown. If the file is a textfile, the text is shown. If the file is something else, a list in hex is displayed. Locally you can define how Concord will react to a certain file by defining it in the ASCII file VIEW.CTL. Here you can specify which viewer to load for GIF files, JPG files, MOD files etc. See the example file included in the Concord archive. Data syntax : [/ALL] <filename> Mandatory data : <filename> Name of the file to be viewed. Extra options : /ALL Search for a match in all available areas. Normally this option only works for the current directory. Menu number : $1008 Menu name : MENU_TMPUNPACK Description : Menu command to extract or copy files to the TEMP directory. this allows your users to unpack an archived file and extract some files, view files inside the archive or re- archive it in another format. This command works for files in the current area. Data syntax : [<unpackfile>] [/?] [<filestounpack>] Mandatory data : None >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 31 Extra options : <unpackfile> Name of the file to unpack. Normally, when no optional data is given, Concord will ask the user which file to unpack to the TEMP directory. /? Displays the contents of a file that is to be unpacked to the TEMP directory. <filestounpack> Name of the file(s) to unpack from the main archive. Normally when no optional data is given, Concord asks the user which files need to be unpacked from the archive. Menu number : $1009 Menu name : MENU_TMPPACK Description : Menu command to pack files in the TEMP directory. Data syntax : [<packintofile>] [/?] [<filestopack>] Mandatory data : None Extra options : <packintofile> Name of the new archive that Concord is about to create. Normally when no optional data is given, Concord will ask which file name to use. /? Displays the files to be packed in the TEMP directory. <filestopack> Name of the file(s) to pack into the new archive. Normally, when no optional data is entered, Concord will ask the user which files to include. Menu number : $100A Menu name : MENU_TMPCOPY Description : Menu command that is used to copy a file to the TEMP directory. Please note the difference with menu option 1008. Option 1008 is used to extract files to the TEMP directory, 100A is used to copy files to the TEMP directory. Data syntax : [<copyfilemask>] Mandatory data : None Extra options : <copyfilemask> Name of the file(s) to copy to the TEMP directory. If no optional data is supplied, Concord will ask the user which file to copy to the TEMP directory. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 32 Menu number : $100B Menu name : MENU_TMPLIST Description : Menu command to list the files in the TEMP directory. Data syntax : [<filemask>] Mandatory data : None Extra options : <filemask> Defines the filemask that Concord will use to display the files in the TEMP directory. All normal DOS wildcards can be used. When no optional data is specified, Concord will show all files. Menu number : $100C Menu name : MENU_TMPKILL Description : This option allows you to remove files from the TEMP directory. Data syntax : [<filemask>] Mandatory data : None Extra options : <filemask> Name or filemask of the file(s) to remove from the TEMP directory. When no optional data is given, Concord will ask which file(s) to remove. Menu number : $100D Menu name : MENU_TMPVIEW Description : View a file that is in the TEMP directory. If the file is an archive, the archive contents is shown. If the file is a textfile, the text is shown. If the file is something else, a list in hex is displayed. Data syntax : [<filemask>] Mandatory data : None Extra options : <filemask> Name or filemask of the file(s) to view. When no optional data is entered, Concord will ask the user for the filename(s). Menu number : $100E Menu name : MENU_MOVEFILE Description : Menu command that allows you to move a file to another area. Data syntax : [<movefilemask>] [<destarea: see menu 1006>] Mandatory data : None Extra options : <movefilemask> Name or filemask of the file(s) to move. When no optional data is entered, Concord will ask for the filename(s) to move. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 33 <destarea: see menu 1006> Area to move the files to. See menu command 1006 for the options available. When no optional data is entered, Concord will ask to which directory to move the file. Menu number : $100F Menu name : MENU_CHECKFLAG Description : Menu command to edit the list of tagged files. This allows the user to delete files from the list of tagged files and to view which files are tagged. Data syntax : [/ALL] Mandatory data : None Extra options : /ALL Display the tagged files from ALL available areas. Normally Concord only shows the tagged files that are in the current area. Menu number : $1010 Menu name : MENU_UPLOAD Description : Menu command used to upload files to your system. The file will be placed in the area defined in the configuration file. Data syntax : [<directory>] Mandatory data : None Extra options : <directory> Normally Concord places the file in the directory specified in the upload settings of the file area configuration. You can override this setting by using an upload path on the optional data field. Menu number : $1011 Menu name : MENU_DOWNLOAD Description : This option allows your users to download files from the system. Data syntax : [/TEMP] [/ALL] [<filename>] Mandatory data : None Extra options : /TEMP This option allows the download of files from the TEMP directory. Use this in your menu with the other TEMP menu commands. /ALL Option to tell Concord to allow downloads from all areas the user has access to. Normally files can be downloaded from the current area only. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 34 <Filename> If you want your users to download a specific file, enter the filename in the optional data field. This allows the downloading of a specific file. Full path and filename must be used. Menu number : $1012 Menu name : MENU_SETFAREAS Description : This allows you to set file areas as 'combined' areas. Data syntax : [num[..num]] [[*]string[*]] [ALL] [ON] [OFF] Mandatory data : One of the extra options needs to be defined followed by the ON or OFF option. These two options are not used alone. Extra options : num[..num] Toggle areas between two given file area numbers on or off depending on the following keyword. [*]string[*] Toggle areas that comply with the given string on or off depending on the keyword that follows this option. If you use the string alone, every area that matches will be used. If you use the *, it is either all areas that have their name starting or ending with the given string that are used. For example when the string is *OW all areas called WINDOWS will be used. ALL Turn all areas on or off. Menu number : $1013 Menu name : MENU_DL_FLIST Description : Download new files list. | Data syntax : <filename> [/PACK] Mandatory data : Name of the filelist. | Extra options : /PACK | Pack the newfiles list before downloading. | Menu number : $1014 | Menu name : MENU_TMPCOPYTAG | Description : Copy the tagged files to the TEMP directory. | This will copy all files that the user | tagged to the TEMP directory, so the user | can perform the available actions on the | file(s). | Data syntax : None | Mandatory data : None | Extra options : None ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 35 | Menu number : $1015 | Menu name : MENU_CHKFATTACH | Description : Menu command to check if there are any file- | attach files waiting for the user. | Data syntax : None | Mandatory data : None | Extra options : None | | Menu number : $1016 | Menu name : MENU_ATTACHFILE | Description : Menu option that allows your users to send | file to other users on your system. This | option is turning your system into a real | mailbox where users cannot only send | messages to other users, but also attach | files to the messages. The addressee must be | present in your userlist. The files are | stored in the directory specified in the | configuration + the CRC-32 code of the | capitalized user name. | Data syntax : [<whoto>] | Mandatory data : None | Extra options : /Whoto | Name of the user that the file attach is | for. The user must be present in the | userlist. | | Menu number : $1017 | Menu name : MENU_KILLATTACH | Description : Option to remove file(s) from the file | attach. | Data syntax : [<Filemask>] | Mandatory data : None | Extra options : <Filemask> | Name or filemask of the file(s) to remove | from the file attach. Menu number : $2004 Menu name : MENU_PREVMAREA Description : See menu command 1004, except that in this case it works for the mail areas. | Data syntax : [/ALL] [/COMB] [/GROUP=xxx] [/PKT] [/MAIL] | Mandatory data : The options on this menu command allows you | to change area within all areas, the | combined areas or within a certain group. | Use only one option at a time, unless it is | the /GROUP option. | Extra options : /ALL | Use all groups for area change. | | /COMB | Use only areas active as combined areas in | the area change. | >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 36 | /GROUP=xxx | Use only areas that belong to group xxx as | the areas to do the area change in. This | command in be used in combination with the | other commands. | | /PKT | Use only areas selected for the QWK system | as areas to change to. | | /MAIL | Change to previous area with mail checkflag | on. Menu number : $2005 Menu name : MENU_NEXTMAREA Description : See menu command 1005, except that in this case it works for the mail areas. | Data syntax : [/ALL] [/COMB] [/GROUP=xxx] [/PKT] [/MAIL] | Mandatory data : Use only one option at a time, unless it is | the /GROUP option. | Extra options : /ALL | Use all groups for area change. | | /COMB | Use only areas active as combined areas in | the area change. | | /GROUP=xxx | Use only areas that belong to group xxx as | the areas to do the area change in. This | command can be used in combination with the | other options. | | /PKT | Use only areas selected for the QWK system | as areas to change to. | | /MAIL | Change to next mail area with mail check | flag on. Menu number : $2006 Menu name : MENU_SELMAREA Description : Menu command to change the mail area. Concord will display a list of mail areas to select from, unless the file MAILEAREA.ANS is found. Data syntax : [/ALL] [/COMBINED] [/NAME=<name>,<name>...] [/GROUP=<group>,<group>...] [/NONE] [/RANGE=<from>..<to>,...] [/ECHO] [/NET] [/LOCAL] [/NEW] [/MSGS] Mandatory data : At least one of the extra option needs to be specified. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 37 Extra options : /ALL Displays the selection screen with all available areas. Only areas that match the security of the user will be displayed. /COMBINED Displays the selection screen with all combined areas. This can vary per user, since the user has the option to turn areas on or off. /NAME=<name>,<name>... Displays the selection screen with all areas that match the name(s) entered on the command line. Note that you can use the Concord macros in this and other fields of the menus. /GROUP=<group>,<group>... Displays the selection screen with all areas belonging to the groups entered on the command line. This allows you to change area within a group. /NONE /RANGE=<from>..<to>,... Displays the selection screen with all areas that are within the range specified on the command line. /ECHO Displays the selection screen with all areas that are configured as echomail areas. /NET Displays the selection screen with all areas that are configured as netmail areas. /LOCAL Displays the selection screen with all areas that are defined as local mail areas. /NEW Displays the selection screen with all areas that have new mail in them. /MSGS Displays the selection screen with all areas that have messages in them. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 38 Menu number : $2007 Menu name : MENU_SCANMSGS Description : Menu option to display a list of the messages in an area. Only the message number, sender, recipient and subject are shown. Data syntax : [/Fwd] [/Rev] [/New] [/Only:<numm>] [/Days:<numm>] [<searchstring>] Mandatory data : One of the options mentioned in the extra options. Only one option can be used at the same time. Extra options : /Fwd Display a list of messages in forward order, starting at the first message. /Rev Display a list of messages in reverse order starting at the last message. In this case only the last message is displayed. Press the Up Arrow or PgUp key for a list of messages before the last messages. /New Only display a list of new messages, starting at the first new message found in the area. /Only:<numm> Display a list of the number of messages from the last message that are given as <numm>. This is done in forward order. /Days:<numm> Display a list of messages which are younger than the number of days specified in <numm>. This is in forward order. <searchstring> String to search for in the message listing. Menu number : $2008 Menu name : MENU_READMSGS Description : Menu command that enables you to read messages on the BBS system. Data syntax : [/Fwd] [/Rev] [/New] [/Only:<numm>] [/Days:<numm>] [/Jump:<numm>] Mandatory data : One of the options mentioned in the extra options. Only one option can be used at the same time. Extra options : /Fwd Read messages in forward order, starting at the first message. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 39 /Rev Read messages in reverse order starting at the last message. /New Read new messages, starting at the first new message found in the area. /Only:<numm> Read messages from the last message that are given as <numm>. This is done in forward order. /Days:<numm> Read messages which are younger than the number of days specified in <numm>. This is in forward order. /Jump:<numm> Read the message defined in the <numm> field on the optional data line. Menu number : $2009 Menu name : MENU_READCOMB Description : Menu command that enables you to read messages on the BBS system. The difference between this command and menu 2008 is that this command works over the combined areas. Concord will see all combined areas as one big area and act accordingly. Users can toggle combined areas on or off in the area selection screen. Data syntax : [/Fwd] [/Rev] [/New] [/Only:<numm>] [/Days:<numm>] [/Jump:<numm>] Mandatory data : One of the options mentioned in the extra options. Only one option can be used at the same time. Extra options : /Fwd Read messages in forward order, starting at the first message. /Rev Read messages in reverse order starting at the last message. /New Read new messages, starting at the first new message found in the area. /Only:<numm> Read messages from the last message that are given as <numm>. This is done in forward order. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 40 /Days:<numm> Read messages which are younger than the number of days specified in <numm>. This is in forward order. /Jump:<numm> Read the message defined in the <numm> field on the optional data line. Menu number : $200A Menu name : MENU_WRITEMSG Description : Menu command that allows you and your users to write messages on the BBS. Concord will write the message in the current active area and will ask for the addressee and the subject unless the options below are used. If it is netmail, an Fidonet address will also be asked. Data syntax : [/T<Whoto>] [/S<Subject>] [/A<Area>] [/Reply] Mandatory data : None Extra options : /T<Whoto> Name of the addressee of the message. Useful if you want a message to the Sysop automatically addressed to yourself. Spaces are allowed in the name. No underscores are needed to separate different name parts. /S<Subject> Subject of the message, for example used for a logoff message. Mostly used in combination with the /T option. Spaces are allowed in the subject. /A<Area> Area number of the area the message is written in. Normally it is in the current area, but this allows you to define a different area. /Reply This means the new message is a reply. Menu number : $200B Menu name : MENU_SCANMAIL Description : Scan the message base for new personal mail and ask the user if he/she wants to read it. Data syntax : None Mandatory data : None Extra options : None ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 41 Menu number : $200C Menu name : MENU_READMARK Description : Read messages previously marked while listing messages. When no messages are marked, this command is not doing anything. Data syntax : None Mandatory data : None Extra options : None Menu number : $200D Menu name : MENU_OFFLINE Description : Download an offline mail packet. Concord will pack messages from the areas selected and place them in an offline mail packet in one of the four available formats, BlueWave, QWK, Omen or ASCII. Selecting message areas for this command is done in the mail area selection screen by pressing the P key, or whatever key you have defined. See the chapter on Offline mail packets for more information. Data syntax : None Mandatory data : None Extra options : None Menu number : $200E Menu name : MENU_OFFLINE2 Description : Upload an offline mail packet. Concord will unpack the mail packet and place the messages in the correct areas. Data syntax : None Mandatory data : None Extra options : None Menu number : $200F Menu name : MENU_SETMAREAS Description : This allows you to set mail areas as 'combined' areas. Data syntax : [num[..num]] [[*]string[*]] [LOCAL] [ECHO] [NET] [ALL] [ON] [OFF] [UNDO] [[NO]MAIL] [[NO]COMB] [CLEAR] [NEW] [ONLY:<Msgs>] [DAYS:<Days>] [MAX] Mandatory data : One of the extra options needs to be defined. Some of the extra options only work in conjunction with another option, like ON and OFF. Extra options : num[..num] Toggle areas between two given mail area numbers on or off depending on the keyword that follows this keyword. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 42 [*]string[*] Toggle areas that comply with the given string on or off depending on the keyword that follows this option. If you use the string alone, every area that matches will be used. If you use the *, it is either all areas that have their name starting or ending with the given string that are used. For example when the string is *OW all areas called WINDOWS will be used. LOCAL Toggle LOCAL mail areas on or off, depending on the keyword that follows this keyword. ECHO Same as LOCAL, except now for Echomail areas. NET Same as local except now for areas that are defined as NETmail in the configuration. ALL Turn all areas on or off. ON Used in combination with one of the other commands. This turns the areas ON. OFF Same as ON, except turning the areas OFF. UNDO Not used at this moment by Concord. [NO]MAIL Turn mail scan on or off for the areas selected. [NO]COMB Turn combined areas on or off. CLEAR Clear all last read pointers in mail areas selected by one of the other options. NEW Set the lastreadpointers to the first new message in the areas selected by one of the other options. >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 43 ONLY:<Msgs> Set the lastreadpointers to the number of messages specified in <Msgs> from the last message in the areas selected by one of the other options. DAYS:<Days> Set the lastreadpointers to the first message younger than the number of days specified in <Days> selected by one of the other options. MAX Set the last readpointer to the last number in the areas selected by one of the other options. | Menu number : $2010 | Menu name : MENU_MAREASTAT | Description : Menu command to show information about your | mail areas. It shows the number of messages | in all available areas. | Data syntax : None | Mandatory data : None | Extra options : None | | Menu number : $2011 | Menu name : MENU_WRITEMSG2 | Description : Menu command to write messages using files. | The file, which must be an ASCII file, will | be imported into the message and can be | edited. Differences between this command and | menu $200A are that all user given | parameters are excluded. You will have to | enter all information on the menu | commandline. All optional commands from menu | $200A are valid with this menu command. | Data syntax : [/QUOTE:<Filename>] [/POST:<Filename>] | Mandatory data : None | Extra options : /QUOTE:<Filename> | File to import into the messagebase as a | quoted file. This means the > character is | placed before every line as if you quoted a | message. | | /POST:<Filename> | File to import into the messagebase. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 44 Menu number : $3004 Menu name : MENU_PREVDOOR Description : See menu command 1004, except that in this case it works for the doors defined in the configuration. | Data syntax : [/GROUP=xxx] | Mandatory data : None | Extra options : /GROUP=xxx | Change to the previous door in the selected | group. Menu number : $3005 Menu name : MENU_NEXTDOOR Description : See menu command 1005, except that in this case it works for the doors defined in the configuration. | Data syntax : [/GROUP=xxx] | Mandatory data : None | Extra options : /GROUP=xxx | Change to the next door in the selected | group. Menu number : $3006 Menu name : MENU_SELDOOR Description : Menu command to change the door. Concord will display a list of doors to select from. Data syntax : [/ALL] [/NAME=<name>,<name>...] [/GROUP=<group>,<group>...] [/NONE] [/RANGE=<from>..<to>,...] Mandatory data : At least one of the extra option needs to be specified. Extra options : /ALL Displays the selection screen with all available doors. Only doors that match the security of the user will be displayed. /NAME=<name>,<name>... Displays the selection screen with all doors that match the name(s) entered on the command line. Note that you can use the Concord macros in this and other fields of the menus. /GROUP=<group>,<group>... Displays the selection screen with all doors belonging to the groups entered on the command line. This allows you to change door within a group. /NONE >> Continued >> ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 45 /RANGE=<from>..<to>,... Displays the selection screen with all doors that are within the range specified on the command line. And that is it for the menu options. Note that Concord is still under development and that new options will be available in the future. If you have any problems setting your menus up, have a look at the sample menus and if that does not help you, contact the Concord support sites or the support echomail area CONCORD. ----------------------------------------------------------------- Concord v0.01 Gamma 2 Chapter 4 - Page 46